A New Robust Variable Step-Size NLMS Algorithm

A new framework for designing robust adaptive filters is introduced. It is based on the optimization of a certain cost function subject to a time-dependent constraint on the norm of the filter update. Particularly, we present a robust variable step-size NLMS algorithm which optimizes the square of the a posteriori error. We also show the link between the proposed algorithm and another one derived using a robust statistics approach. In addition, a theoretical model for predicting the transient and steady-state behavior and a proof of almost sure filter convergence are provided. The algorithm is then tested in different environments for system identification and acoustic echo cancelation applications.     

Preparation and characterization of a macroporous agarose monolith as a stationary phase in IMAC chromatography

A macroporous monolith used as stationary phase for the separation of biomolecules by immobilized metal ion affinity chromatography (IMAC), based on D5 agarose (D5) chemically modified was proposed. The characterization of physical properties was studied. Pressure drop was <0.4?MPa, being a very low value compared to other similar chromatographic supports. The adsorption/desorption process was carried out using bovine serum albumin (BSA) at pH 7.4 as a target protein. The monolith was re-used for 20 adsorption/desorption cycles and it was possible to verify that the average percentage of adsorption in all cycles was 89.65%. It was also possible to apply a model in order to obtain the kinetic adsorption constant (k_a), desorption constant (k_d) and equilibrium constant (K_e) by the proposed system. These results indicate that this system is governed by the adsorption process.     

Preparation of spherical aggregates of taro starch granules

Taro starch spherical aggregates were prepared by including a spray drying step in a conventional pilot plant-scale starch isolation procedure. The aim of this study was to characterize these spherical aggregates. The procedure was repeated three times to verify the spherical aggregates formation, which was shown by scanning electron microscopy. Amylose was not be detected in the aggregates, and a protein content of 4.5 g/100 g was recorded. Aggregation of taro starch granules did not affect the X-ray diffraction pattern. The maximum peak viscosity of the aggregate preparation was obtained at a relatively high temperature (i.e. start of the temperature holding step). The phase transition of taro starch aggregates in excess water showed high temperatures, with low molecular reorganization during storage. During water retention capacity (WRC) and solubility tests, taro starch aggregates were stable until 70 °C. The spray drying conditions used produced spherical aggregates of taro starch that presented physicochemical and functional characteristics with potential for encapsulation of substances.     

N-methyl-2-hydroxyethylammonium oleate ionic liquid performance as corrosion inhibitor for mild steel in hydrochloric acid medium

The aim of the present study is to evaluate the performance of N-methyl-2-hydroxyethylammonium oleate ([m-2HEA][Ol]) as a corrosion inhibitor for mild steel in a 0.1-mol/L hydrochloric acid solution and also investigate the role of chloride in the inhibition mechanism. This protic ionic liquid (PIL) has formerly shown a high efficiency as a corrosion inhibitor in a neutral chloride medium. Electrochemical and weight loss measurements, surface contact angle determination, scanning electron microscopy, and Raman spectroscopy were used to understand the factors that influence the response of the studied inhibitor. Results revealed that [m-2HEA][Ol] behaves as a mixed-type adsorption inhibitor, by blocking cathodic sites and by modifying the activation energy of the anodic reaction, and it can reach up to 94–97% of inhibition efficiency. PIL adsorption was enhanced by the excess of positive charge of the mild steel. The effect of inhibitor molecule has been discussed to propose a mechanism that explains the inhibitory action of the corrosion inhibitor, pointing out the role of chloride in the inhibition mechanism.     

Designing robust volunteer-based evolutionary algorithms

This paper tackles the design of scalable and fault-tolerant evolutionary algorithms computed on volunteer platforms. These platforms aggregate computational resources from contributors all around the world. Given that resources may join the system only for a limited period of time, the challenge of a volunteer-based evolutionary algorithm is to take advantage of a large amount of computational power that in turn is volatile. The paper analyzes first the speed of convergence of massively parallel evolutionary algorithms. Then, it provides some guidance about how to design efficient policies to overcome the algorithmic loss of quality when the system undergoes high rates of transient failures, i.e. computers fail only for a limited period of time and then become available again. In order to provide empirical evidence, experiments were conducted for two well-known problems which require large population sizes to be solved, the first based on a genetic algorithm and the second on genetic programming. Results show that, in general, evolutionary algorithms undergo a graceful degradation under the stress of losing computing nodes. Additionally, new available nodes can also contribute to improving the search process. Despite losing up to 90 % of the initial computing resources, volunteer-based evolutionary algorithms can find the same solutions in a failure-prone as in a failure-free run.     

A Potent N-(piperidin-4-yl)-1H-pyrrole-2-carboxamide Inhibitor of Adenylyl Cyclase of G. lamblia: Biological Evaluation and Molecular Modelling Studies

In this work, we report a derivative of N-(piperidin-4-yl)-1H-pyrrole-2-carboxamide as a new inhibitor for adenylyl cyclase of Giardia lamblia which was obtained from a study using structural data of the nucleotidyl cyclase 1 (gNC1) of this parasite. For such a study, we developed a model for this specific enzyme by using homology techniques, which is the first model reported for gNC1 of G. lamblia. Our studies show that the new inhibitor has a competitive mechanism of action against this enzyme. 2-Hydroxyestradiol was used as the reference compound for comparative studies. Results in this work are important from two points of view. on the one hand, an experimentally corroborated model for gNC1 of G. lamblia obtained by molecular modelling is presented; on the other hand, the new inhibitor obtained is an undoubtedly excellent starting structure for the development of new metabolic inhibitors for G. lamblia.     

The photoreceptive cells of the pineal gland in adult zebrafish (Danio rerio)

The zebrafish pineal gland plays a fundamental role in the regulation of the circadian rhythm through the melatonin secretion. The pinealocytes, also called photoreceptive cells, are considered the morphofunctional unit of pineal gland. In literature, the anatomical features, the cellular characteristics, and the pinealocytes morphology of zebrafish pineal gland have not been previously described in detail. Therefore, this study was undertaken to analyze the structure and ultrastructure, as well as the immunohistochemical profile of the zebrafish pineal gland with particular reference to the pinealocytes. Here, we demonstrated, using RT-PCR, immunohistochemistry and transmission electron microscopy, the expression of the mRNA for rhodopsin in the pineal gland of zebrafish, as well as its cellular localization exclusively in the pinealocytes of adult zebrafish. Moreover, the ultrastructural observations demonstrated that the pinealocytes were constituted by an outer segment with numerous lamellar membranes, an inner segment with many mitochondria, and a basal pole with the synapses. Our results taken together demonstrated a central role of zebrafish pinealocytes in the control of pineal gland functions.     

Determination of cobalt in seawater by catalytic adsorptive cathodic stripping voltammetry

A new procedure for the direct determination of picomolar levels of cobalt in seawater is presented. Cathodic stripping voltammetry is preceded by adsorptive accumulation of the cobalt-nioxime (cyclohexane-1,2-dione dioxime) complex from seawater containing 6 μM nioxime and 80 mM ammonia at pH 9.1, onto a hanging mercury drop electrode, followed by reduction of the adsorbed species. The reduction current is catalytically enhanced by the presence of 0.5 M nitrite. Optimized conditions for cobalt include a 30 s adsorption period at -0.7 V and a voltammetric scan using differential pulse modulation. According to the proposed reaction mechanism, dissolved Co(II) is oxidized to Co(III) upon addition of nioxime and high concentrations of ammonia and nitrite; a mixed Co(III)-ammonia-nitrite complex is adsorbed on the electrode surface; the Co(III) is reduced to Co(II) (complexed by nioxime) during the voltammetric scan, followed by its chemical reoxidation by the nitrite, initiating a catalytically enhanced current. A detection limit of 3 pM cobalt (at an adsorption period of 60 s) enables the detection of this metal in uncontaminated seawater using a very short adsorption time. UV digestion of seawater is essential, as part of the cobalt may occur strongly complexed by organic matter and rendered nonlabile. The method was applied successfully to the determination of the distribution of cobalt in the water column of the Mediterranean.