Optical properties of highly transparent polypropylene cast films: Influence of material structure,additives, and processing conditions

Polypropylene homopolymers and ethylene/propylene‐random‐copolymers formulated with and without anti‐blocking additives were extruded to cast films with an industrial scale extruder equipped with a soft box, a specific air knife that expels a higher volume of air at lower velocity. The films were analyzed as to their optical properties haze and clarity. A comprehensive topographical characterization was performed using atomic force microscopy (AFM) and confocal microscopy. To obtain morphological information on a nanometer scale AFM phase imaging, micro‐thermal analysis and small angle X‐ray scattering (SAXS) were done. A significant effect of additives and processing conditions on the film topography and the optical properties was revealed. The films without anti‐blocking and antacid aids showed the best optical properties and lowest vertical roughness fluctuations. In contrast, the addition of anti‐blocking and antacid aids reduced the optical properties associated with an increase in surface roughness. While for films without anti‐blocking aids an enhanced soft box condition resulted in lower vertical fluctuations of roughness and better optical properties, the behavior was in reverse for films with anti‐blocking aid. By means of SAXS crystalline lamellae with a thickness of about 2.5 nm were detected. High‐resolution phase imaging AFM yielded thicker crystal lamellae on the film surface. POLYM. ENG. SCI., 46:520–531, 2006. © 2006 Society of Plastics Engineers.     

Avalanche‐Discharge‐Induced Electrical Forming in Tantalum Oxide‐Based Metal–Insulator–Metal Structures

Oxide‐based metal–insulator–metal structures are of special interest for future resistive random‐access memories. In such cells, redox processes on the nanoscale occur during resistive switching, which are initiated by the reversible movement of native donors, such as oxygen vacancies. The formation of these filaments is mainly attributed to an enhanced oxygen diffusion due to Joule heating in an electric field or due to electrical breakdown. Here, the development of a dendrite‐like structure, which is induced by an avalanche discharge between the top electrode and the Ta₂O_5‐x layer, is presented, which occurs instead of a local breakdown between top and bottom electrode. The dendrite‐like structure evolves primarily at structures with a pronounced interface adsorbate layer. Furthermore, local conductive atomic force microscopy reveals that the entire dendrite region becomes conductive. Via spectromicroscopy it is demonstrated that the subsequent switching is caused by a valence change between Ta⁴⁺ and Ta⁵⁺, which takes place over the entire former Pt/Ta₂O_5‐x interface of the dendrite‐like structure.     

Uranium sorption on various forms of titanium dioxide--influence of surface area, surface charge, and impurities

Titanium dioxide (TiO(2)) has often served as a model substrate for experimental sorption studies of environmental contaminants. However, various forms of Ti-oxide have been used, and the different sorption properties of these materials have not been thoroughly studied. We investigated uranium sorption on some thoroughly characterized TiO(2) surfaces with particular attention to the influence of surface area, surface charge, and impurities. The sorption of U(VI) differed significantly between samples. Aggressive pretreatment of one material to remove impurities significantly altered the isoelectric point, determined by an electroacoustic method, but did not significantly impact U sorption. Differences in sorption properties between the various TiO(2) materials were related to the crystallographic form, morphology, surface area, and grain size, rather than to surface impurities or surface charge. In-situ attenuated total reflection Fourier-transform infrared (ATR FT-IR) spectroscopic studies showed that the spectra of the surface species of the TiO(2) samples are not significantly different, suggesting the formation of similar surface complexes. The data provide insights into the effect of different source materials and surface properties on radionuclide sorption.     

Antibiotic resistance in bacteria isolated from vegetables with regards to the marketing stage (farm vs. supermarket)

The aim of this study was to elucidate whether and to what extent fresh produce from Germany plays a role as a carrier and reservoir of antibiotic resistant bacteria. For this purpose, 1001 vegetables (fruit, root, bulbous vegetables, salads and cereals) were collected from 13 farms and 11 supermarkets in Germany and examined bacteriologically. Phenotypic resistance of Enterobacter cloacae (n = 172); Enterobacter gergoviae (n = 92); Pantoea agglomerans (n = 96); Pseudomonas aeruginosa (n = 295); Pseudomonas putida (n = 106) and Enterococcus faecalis (n = 100) against up to 30 antibiotics was determined by using the microdilution method. Resistance to ß-lactams was most frequently expressed by P. agglomerans and E. gergoviae against cefaclor (41% and 29%). Relatively high resistance rates were also observed for doxycycline (23%), erythromycin (21%) and rifampicin (65%) in E. faecalis, for spectinomycin (28%) and mezlocillin (12%) in E. cloacae, as well as for streptomycin (19%) in P. putida. In P. aeruginosa, relatively low resistance rates were observed for the aminoglycosides amikacin, apramicin, gentamicin, neomycin, netilmicin and tobramycin (< 4%); 11% was resistant to streptomycin. No glycopeptide-resistant enterococci were observed. Resistance rates of bacteria isolated from farm samples were higher than those of the retail markets whenever significant differences were observed. This suggests that expressing resistance is at the expense of bacterial viability, since vegetables purchased directly at the farm are probably fresher than at the supermarket, and they have not been exposed to stress factors. However, this should not keep the customer from buying directly at the farm, since the overall resistance rates were not higher than observed in bacteria from human or animal origin. Instead, peeling or washing vegetables before eating them raw is highly recommended, since it reduces not only the risk of contact with pathogens, but also that of ingesting and spreading antibiotic resistant bacteria.     

对地下室顶板上消防车活荷载合理取值的探讨

针对2006年版《建筑结构荷载规范》( GB 50009-2001)第4.1.1条对消防车活荷载规定的缺陷,分别以板和梁为研究对象,考虑车台数、覆土厚度、计算跨度等因素,按内力(弯矩)等值的原则,计算出不同条件下的消防车等效均布活荷载,进而归纳出适于设计应用的取值.研究表明:覆土对qe有明显的折减作用,是影响qe取值的...     

Bioluminescent Optogenetics: A Novel Experimental Therapy to Promote Axon Regeneration after Peripheral Nerve Injury

Functional recovery after peripheral nerve injury (PNI) is poor, mainly due to the slow and incomplete regeneration of injured axons. Experimental therapies that increase the excitability of the injured axons have proven remarkably successful in promoting regeneration, but their clinical applicability has been limited. Bioluminescent optogenetics (BL-OG) uses luminopsins, fusion proteins of light-generating luciferase and light-sensing ion channels that could be used to increase neuronal excitability if exposed to a suitable substrate. Excitatory luminopsins were expressed in motoneurons of transgenic mice and in wildtype mice transduced with adeno-associated viral vectors. Intraperitoneal administration of coelenterazine (CTZ), a known luciferase substrate, generated intense bioluminescence in peripheral axons. This bioluminescence increased motoneuron excitability. A single administration of CTZ immediately after sciatic nerve transection and repair markedly enhanced motor axon regeneration. Compound muscle action potentials were 3–4 times larger than controls by 4 weeks after injury. The results observed with transgenic mice were comparable to those of mice in which the luminopsin was expressed using viral vectors. Significantly more motoneurons had successfully reinnervated muscle targets four weeks after nerve injury in BL-OG treated mice than in controls. Bioluminescent optogenetics is a promising therapeutic approach to enhancing axon regeneration after PNI.     

Assessment of Bone Microstructure by Micro CT in C57BL/6J Mice for Sex-Specific Differentiation

It remains uncertain which skeletal sites and parameters should be analyzed in rodent studies evaluating bone health and disease. In this cross-sectional mouse study using micro-computed tomography (µCT), we explored: (1) which microstructural parameters can be used to discriminate female from male bones and (2) whether it is meaningful to evaluate more than one bone site. Microstructural parameters of the trabecular and/or cortical compartments of the femur, tibia, thoracic and lumbar vertebral bodies, and skull were evaluated by µCT in 10 female and 10 male six-month-old C57BL/6J mice. The trabecular number (TbN) was significantly higher, while the trabecular separation (TbSp) was significantly lower in male compared to female mice at all skeletal sites assessed. Overall, bone volume/tissue volume (BV/TV) was also significantly higher in male vs. female mice (except for the thoracic spine, which did not differ by sex). Most parameters of the cortical bone microstructure did not differ between male and female mice. BV/TV, TbN, and TbSp at the femur, and TbN and TbSp at the tibia and lumbar spine could fully (100%) discriminate female from male bones. Cortical thickness (CtTh) at the femur was the best parameter to detect sex differences in the cortical compartment (AUC = 0.914). In 6-month-old C57BL/6J mice, BV/TV, TbN, and TbSp can be used to distinguish male from female bones. Whenever it is not possible to assess multiple bone sites, we propose to evaluate the bone microstructure of the femur for detecting potential sex differences.     

Tomato Sterol 22-desaturase Gene CYP710A11: Its Roles in Meloidogyne incognita Infection and Plant Stigmasterol Alteration

Sterols are isoprenoid-derived lipids that play essential structural and functional roles in eukaryotic cells. Plants produce a complex mixture of sterols, and changes in plant sterol profiles have been linked to plant–pathogen interactions. β-Sitosterol and stigmasterol, in particular, have been associated with plant defense. As nematodes have lost the ability to synthesize sterols de novo, they require sterols from the host. Tomato (Solanum lycopersicum) plants infected by the plant parasitic nematode Meloidogyne incognita show a reduced level of stigmasterol and a repression of the gene CYP710A11, encoding the sterol C-22 desaturase that is responsible for the conversion of β-sitosterol to stigmasterol. In this study, we investigated the role of the tomato sterol C-22 desaturase gene CYP710A11 in the response to infection by M. incognita. We explored the plant–nematode interaction over time by analyzing the plant sterol composition and CYP710A11 gene regulation in S. lycopersicum after M. incognita infection. The temporal gene expression analysis showed that 3 days after inoculation with M. incognita, the CYP710A11 expression was significantly suppressed in the tomato roots, while a significant decrease in the stigmasterol content was observed after 14 days. A cyp710a11 knockout mutant tomato line lacking stigmasterol was analyzed to better understand the role of CYP710A11 in nematode development. M. incognita grown in the mutant line showed reduced egg mass counts, presumably due to the impaired growth of the mutant. However, the nematodes developed as well as they did in the wild-type line. Thus, while the suppression of CYP710A11 expression during nematode development may be a defense response of the plant against the nematode, the lack of stigmasterol did not seem to affect the nematode. This study contributes to the understanding of the role of stigmasterol in the interaction between M. incognita and tomato plants and shows that the sterol C-22 desaturase is not essential for the success of M. incognita.     

Wärmeleitfähigkeit eines Gemisches von Metallkugeln und ÖI

Zusammenfassung Die W?rmeleitf?higkeit von Gemischen aus festen und flüssigen Stoffen in Abh?ngigkeit von der W?rmeleitf?higkeit der Füllstoffe wird bestimmt Diese Arbeit wurde ausgeführt unter Leitung von Prof. Dr.Hase, dem ich für die Anregung zu der Arbeit und seine stete Hilfsbereitschaft herzlich danke.