Investigation of γ-Linolenic Acid and Stearidonic Acid Biosynthesis During a Life Cycle of <Emphasis Type="Italic">Borago officinalis</Emphasis> L.

This study investigated the levels of γ-linolenic (GLA, 18:3n-6) and stearidonic acid (SDA, 18:4n-3) in various parts of the borage plant (Borago officinalis L.) to elucidate Δ6-desaturase activity. Lipid class and fatty acid (FA) composition during germination of the seeds and FA composition of various borage parts were determined as well as FA compositions of neutral lipids (NL), polar lipids (PL), glycolipids (GL) and monogalactosyl diacylglycerols (MGDG) of borage leaves. When seeds were germinated for 12 days in the dark then exposed to light for 8 h, an overall decrease in oil content was seen with a significant increase in PL from 0.2 to 39.1%. An increase in SDA (from 0.2 to 0.6 g/100 g oil) indicated minor FA synthesis during germination and therefore, Δ6-desaturase activity with the most marked increase after light exposure. The FA compositions of developing and mature seeds were similar, suggesting oil/FA synthesis takes place at the initial stage of seed development. Among all the borage parts, the leaves had the highest amounts of α-linolenic acid (ALA, 18:3n-3) (36.2%), indicating Δ15-desaturase activity, and SDA (25.2%), indicating Δ6-desaturase activity. In leaves, the GL and especially, MGDG fractions had the highest amounts of SDA (31.8 and 39.8%, respectively), indicating that Δ6-desaturase is most active in chloroplasts. Leaves and developing seeds appear to be the major sources of Δ6-desaturase in borage, associated with different organelles in the different tissues.     

Effect of multiblock copolymers in polymer blends

The use of multiblock copolymers for the compatibilization of immiscible polymer blends is controversially discussed in the literature. Investigations have been carried out to estimate the effect of multiblock copolymers containing segments of a liquid crystalline polyester (LCP) and polysulfone (PSU) segments in blends of the based homopolymers. One goal was to determine whether multiblock copolymers provide an opportunity for compatibilizing PSU/LCP blends. By using PSU/LCP multiblock copolymers with different molecular weights of the blocks in the appropriate binary, solution-casted blends, it was shown that the interpenetration of the polysulfone phase of the block copolymer and the PSU matrix leads to an improved miscibility of the blend. This effect is retained in ternary blends of PSU, LCP, and the multiblock copolymer, assuming a certain critical molecular weight of the multiblock copolymer segments. In addition, some mechanical characteristics of PSU/LCP melt blends such as the E-modulus and fracture strength are improved by adding long-segmented multiblock copolymers. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 66: 2293–2309, 1997     

Deacylation of Calcium-Dependent Antibiotics from Streptomyces violaceoruber in Co-culture with Streptomyces sp. MG7-G1

When Streptomyces violaceoruber grows together with Streptomyces sp. MG7-G1, it reacts with strongly induced droplet production on its aerial mycelium. Initially the metabolite profile of droplets from S. violaceoruber in co-culture with Streptomyces sp. MG7-G1 was compared to samples from S. violaceoruber in single-culture by using high-performance liquid chromatography-mass spectrometry (HPLC-MS). Then, the exudate from agar plates of co-cultures and single cultures (after freezing and thawing) was also analysed. Several compounds were only observed when S. violaceoruber was grown in co-culture. Based on their high-resolution ESI mass spectra and their comparable retention times to the calcium-dependent antibiotics (CDAs) produced by S. violaceoruber, the new compounds were suspected to be deacylated calcium-dependent antibiotics (daCDAs), lacking the 2,3-epoxyhexanoyl residue of CDAs. This was verified by detailed analysis of the MS/MS spectra of the daCDAs in comparison to the CDAs. The major CDA compounds present in calcium ion-supplemented agar medium of co-cultures were daCDAs, thus suggesting that Streptomyces sp. MG7-G1 expresses a deacylase that degrades CDAs.     

Synthese und charakterisierung von butadien-divinylbenzol-copolymeren

The copolymerization of butadiene with a technical divinylbenzene fraction was investigated to study the modification of cis-1,4 polybutadiene. Beside the Ziegler-Natta-catalyst nickeloctanoate/bortrifluoride/aluminiumtriethyl, another catalytic system consisting of nickeloctanoate/titaniumtetrachloride/aluminiumtriethyl was used, which allows to polymerize more divinylbenzene because of its higher activity toward vinylaromates. With the help of spectroscopical, pyrolysis-gaschromatographical and thermoanalytical methods one can obtain relations between glass-, crystallization- and melting temperature and the microstructure of the polymer. It can be shown that not only the divinylbenzene but also the trans-1,4- and the 1,2-vinyl units are statistically distributed in the polymer. By this, beside the pyrolysis-gaschromatography, particularly the differential scanning calorimetry is a useful tool to characterize the structure of partially crosslinked polymers obtained from polymerization of technical fractions.     

The Phospholipid Composition of Kangaroo Spermatozoa Verified by Mass Spectrometric Lipid Analysis

Cryopreservation of kangaroo sperm has not been successful so far, and yet there is no promising cryopreservation protocol for these cells available. However, conservation of gametes is extremely important, particularly in the context of preserving endangered species. As spermatozoa are comprised of different membrane systems, the composition of these membranes might account for difficulties in cryopreservation. Lipids, as the main components, affect the physical properties of biological membranes and play a major role in sperm maturation. Therefore, knowledge of the lipid composition is crucial for any further step toward the preservation of the species. We used MALDI‐TOF, ESI‐IT, tandem mass spectrometry, and thin layer chromatography to investigate the lipid composition of epididymal spermatozoa of four different kangaroo species. Spectra of these species were very similar with respect to the identified lipid species. Tremendous changes in the lipid composition during the transit of sperm from caput to cauda epididymis could be seen, specifically an increase in poly‐unsaturated fatty acids, ether lipids, and plasmalogens, as well as a reduction in mono‐ and di‐unsaturated fatty acids. Additionally, phosphatidylcholines containing docosatrienoic acid (22:3), a heretofore unknown fatty acid for sperm membranes, showed the highest abundance in kangaroo sperm.     

Fe(PyTACN)‐Catalyzed cis‐Dihydroxylation of Olefins with Hydrogen Peroxide

A family of iron complexes with general formula [Fe(II)(^R,Y,XPyTACN)(CF₃SO₃)₂], where ^R,Y,XPyTACN=1‐[2′‐(4‐Y‐6‐X‐pyridyl)methyl]‐4,7‐dialkyl‐1,4,7‐triazacyclononane, X and Y refer to the groups at positions 4 and 6 of the pyridine, respectively, and R refers to the alkyl substitution at N‐4 and N‐7 of the triazacyclononane ring, are shown to be catalysts for efficient and selective alkene oxidation (epoxidation and cis‐dihydroxylation) employing hydrogen peroxide as oxidant. Complex [Fe(II)(^Me,Me,HPyTACN)(CF₃SO₃)₂] ( 7 ), was identified as the most efficient and selective cis‐dihydroxylation catalyst among the family. The high activity of 7 allows the oxidation of alkenes to proceed rapidly (30 min) at room temperature and under conditions where the olefin is not used in large amounts but instead is the limiting reagent. In the presence of 3 mol% of 7 , 2 equiv. of H₂O₂ as oxidant and 15 equiv. of water, in acetonitrile solution, alkenes are cis‐dihydroxylated reaching yields that might be interesting for synthetic purposes. Competition experiments show that 7 exhibits preferential selectivity towards the oxidation of cis olefins over the trans analogues, and also affords better yields and high [syn‐diol]/[epoxide] ratios when cis olefins are oxidized. For aliphatic substrates, reaction yields attained with the present system compare favourably with state of the art Fe‐catalyzed cis‐dihydroxylation systems, and it can be regarded as an attractive complement to the iron and manganese systems described recently and which show optimum activity against electron‐deficient and aromatic olefins.     

Substrate Profiling of Anion Methyltransferases for Promiscuous Synthesis of S-Adenosylmethionine Analogs from Haloalkanes

Biocatalytic alkylation reactions can be performed with high chemo-, regio- and stereoselectivity using S-adenosyl-l -methionine (SAM)-dependent methyltransferases (MTs) and SAM analogs. Currently, however, this methodology is limited in application due to the rather laborious protocols to access SAM analogs. It has recently been shown that halide methyltransferases (HMTs) enable synthesis and recycling of SAM analogs with readily available haloalkanes as starting material. Here we expand this work by using substrate profiling of the anion MT enzyme family to explore promiscuous SAM analog synthesis. Our study shows that anion MTs are in general very promiscuous with respect to the alkyl chain as well as the halide leaving group. Substrate profiling further suggests that promiscuous anion MTs cluster in sequence space. Next to iodoalkanes, cheaper, less toxic, and more available bromoalkanes have been converted and several haloalkanes bearing short alkyl groups, alkyl rings, and functional groups such as alkene, alkyne and aromatic moieties are accepted as substrates. Further, we applied the SAM analogs as electrophiles in enzyme-catalyzed regioselective pyrazole allylation with 3-bromopropene as starting material.     

Transcriptome Analyses of Adipose Tissue Samples Identify EGFL6 as a Candidate Gene Involved in Obesity-Related Adipose Tissue Dysfunction in Children

Obesity develops early in childhood and is accompanied by early signs of adipose tissue (AT) dysfunction and metabolic disease in children. In order to analyse the molecular processes during obesity-related AT accumulation in children, we investigated genome-wide expression profiles in AT samples, isolated adipocytes, and stromal vascular fraction (SVF) cells and assessed their relation to obesity as well as biological and functional AT parameters. We detected alterations in gene expression associated with obesity and related parameters, i.e., BMI SDS, adipocyte size, macrophage infiltration, adiponectin, and/or leptin. While differential gene expression in AT and adipocytes shared an enrichment in metabolic pathways and pathways related to extracellular structural organisation, SVF cells showed an overrepresentation in inflammatory pathways. In adipocytes, we found the strongest positive association for epidermal growth factor-like protein 6 (EGFL6) with adipocyte hypertrophy. EGFL6 was also upregulated during in vitro adipocyte differentiation. In children, EGFL6 expression was positively correlated to parameters of AT dysfunction and metabolic disease such as macrophage infiltration into AT, hs-CRP, leptin levels, and HOMA-IR. In conclusion, we provide evidence for early alterations in AT gene expression related to AT dysfunction in children and identified EGFL6 as potentially being involved in processes underlying the pathogenesis of metabolic disease.     

Construction of Recombinant Escherichia coli Catalysts which Simultaneously Express an (S)‐Oxynitrilase and Different Nitrilase Variants for the Synthesis of (S)‐Mandelic Acid and (S)‐Mandelic Amide from Benzaldehyde and Cyanide

Recombinant Escherichia coli strains were constructed which simultaneously expressed the genes encoding the (S)‐oxynitrilase from cassava (Manihot esculenta) together with the wild‐type or a mutant variant of the arylacetonitrilase from Pseudomonas fluorescens EBC191 in a single organism under the control of a rhamnose‐inducible promoter. The whole cell catalysts obtained converted benzaldehyde and potassium cyanide in aqueous media at pH 5.2 mainly to (S)‐mandelic acid and/or (S)‐mandelic amide and synthesized only low amounts of the corresponding (R)‐enantiomers. The conversion of benzaldehyde and potassium cyanide (KCN) by a whole‐cell catalyst simultaneously expressing the (S)‐oxynitrilase and the wild‐type nitrilase resulted in a ratio of (S)‐mandelic acid to (S)‐mandelic amide of about 4:3. This could be explained by the strong nitrile hydratase activity of the wild‐type nitrilase with (S)‐mandelonitrile as substrate. The relative proportion of (S)‐mandelic amide formed in this system was significantly increased by coexpressing the (S)‐oxynitrilase with a carboxy‐terminally truncated variant of the nitrilase. This whole‐cell catalyst converted benzaldehyde and KCN to mandelic amide and mandelic acid in a ratio of about 9:1. The ee of the (S)‐mandelic amide formed was calculated to be >95%.     

Thermal depolarization and electromechanical hardening in Zn2+-doped Na1/2Bi1/2TiO3-BaTiO3

Na_1/2Bi_1/2TiO₃-based materials have been earmarked for one of the first large-volume applications of lead-free piezoceramics in high-power ultrasonics. Zn²⁺-doping is demonstrated as a viable route to enhance the thermal depolarization temperature and electromechanically harden (1-y)Na_1/2Bi_1/2TiO₃-yBaTiO₃ (NBT100yBT) with a maximum achievable operating temperature of 150 °C and mechanical quality factor of 627 for 1 mole % Zn²⁺-doped NBT6BT. Although quenching from sintering temperatures has been recently touted to enhance T_F-R, with quenching the doped compositions featuring an additional increase in T_F-R by 17 °C, it exhibits negligible effect on the electromechanical properties. The effect is rationalized considering the missing influence on conductivity and therefore, negligible changes in the defect chemistry upon quenching. High-resolution diffraction indicates that Zn²⁺-doped samples favor the tetragonal phase with enhanced lattice distortion, further corroborated by ²³Na Nuclear Magnetic Resonance investigations.