A multi-criteria assessment tool for screening preliminary product platform concepts

Platform concept evaluation is a more challenging task than evaluating a single product concept since a platform must effectively support multiple product variants over a prolonged period of time. Existing platform methods develop specific criteria in depth, yet an evaluation of alternative platforms should be based on a broad set of criteria. Based on expert interviews, personal experience, and a literature search we propose a platform assessment tool consisting of 19 criteria for platform evaluation. The criteria are group into six categories: customer satisfaction, variety, after-sale, organization, flexibility, and complexity. The tool is focused on the early platform architecture phase, before proof-of-concept prototyping. However, it can also be used subsequently for platform refinement when more data becomes available. We demonstrate our platform assessment tool through an example with a cordless drill platform.     

Robust Positively Invariant Cylinders in Constrained Variable Structure Control

This paper proposes the use of cylinders as primary invariant sets to be used in certain state-constrained control designs. Following the idea originally introduced by O'Dell, the primary invariant set is intersected with the state constraints to yield sets which retain the invariance under some conditions. Although several results presented here apply to fairly general nonlinear systems and primary invariant sets of any shape, the focus is on constrained sliding-mode control (SMC) using infinite cylinders as the primary invariant set. Their use is motivated by a coordinate transformation where the sliding motion is decoupled from the overall convergence to the origin. Robust positive invariance conditions are given for cylinders having convex and compact cross sections. For the case of cylinders with ellipsoidal cross sections, the invariance condition is given in the form of a linear matrix inequality. Further, a decision procedure to qualify each state constraint is given as a tool for the selection of the switching gain. A numerical example for a third-order plant illustrates the method.     

Joint Angular- and Delay-Domain MIMO Propagation Parameter Estimation Using Approximate ML Method

In this paper, we derive an estimation method that jointly estimates the parameters of the concentrated propagation paths and the distributed scattering component that are frequently observed in multiple-input multiple-output (MIMO) channel sounding measurements. The joint angular-delay domain model leads to a correlation matrix with high dimensionality, which makes direct implementation of a maximum-likelihood (ML) estimator unfeasible. We derive low-complexity methods for computing approximate ML estimates that exploit the structure of the covariance matrices. We propose an iterative two-step procedure that alternates between the estimation of the parameters of the concentrated propagation paths and the parameters of the distributed scattering. For the distributed scattering, the estimator first optimizes the parameters describing their time-delay structure. Then, using the estimated time-delay parameters, the parameters of the angular distributions are optimized. We present simulation results and compare the estimated time-delay and angular distributions to the actual distributions, demonstrating that high-quality estimates are obtained. The large sample performance of the estimator is studied by establishing the Cramer-Rao lower bound (CRLB) and comparing it to the variances of the estimates. The simulations show that the variance of the proposed estimation technique reaches the CRLB for relatively small sample size for most parameters, and no bias is observed.     

Aspects of operational atmospheric correction of hyperspectral imagery

The large number of spectral bands of hyperspectral instruments and the time required for the calculation of atmospheric look-up tables and the reflectance image cube pose very challenging requirements on an operational processing facility. This contribution presents some aspects and suggestions to reduce the processing time. Essential components are a precalculated database with a reduced number of spectral bands, an interactive phase to determine the appropriate atmospheric parameters, and a choice between medium and high accuracy levels for the atmospheric correction. The medium accuracy levels work with look-up tables for a reduced number of spectral bands employing interpolation for the channels omitted in the look-up tables. The high accuracy level uses tables for all channels and includes the scan angle dependence of the atmospheric radiance and transmittance functions. These ideas were successfully implemented and tested during several airborne hyperspectral campaigns resulting in an estimated time saving of a factor 3-7. The deviations of field measured reflectance spectra and spectra retrieved from airborne HyMap imagery are in the range of 2-3% or better.     

Correction of ozone influence on TOA radiance

An accurate atmospheric correction (AC) of Earth remote-sensing data in the spectral region 450–800 nm has to account for the ozone gas absorption influence. Usual operational AC codes employ a fixed ozone concentration corresponding to a climatologic average for a certain region and season, e.g. the mid-latitude summer atmosphere of the Moderate Resolution Atmospheric Transmission (MODTRAN) code. The reasons for a fixed ozone column are that ozone does not vary rapidly on a spatial and temporal scale, and additionally, the look-up table (LUT) size for AC is already big. This means that another degree of freedom for the ozone parameter would dramatically increase the size of the LUT database and the time required for LUT interpolation. In order to account for this effect, we use already existing LUTs that were calculated for a certain ozone reference level, e.g. an ozone column of g = 330 Dobson Units (DU) for MODTRAN’s mid-latitude summer atmosphere. Then the deviation of the top-of-atmosphere (TOA) radiance ΔL(g) from the reference level L(g = 330) is calculated as a function of solar and view geometries. The calculation is performed for a set of 36 wavelengths in the ozone-sensitive spectrum (450–800 nm) and five ozone columns. The last step computes the linear regression coefficients for each wavelength and geometry. The results are stored in a small table (11 kB). It is shown that the ozone influence is accurately accounted for by multiplying the modelled radiance L(g = 330) with a factor depending on g and wavelength yielding TOA radiance relative errors smaller than 0.5% for a wide range of ozone concentrations between 180 and 500 DU. Selected examples of a sensitivity study of the ozone effect on the retrieval of water constituents demonstrate the need to account for ozone in the AC step.     

Spectral and radiometric requirements for the airborne thermal imaging spectrometer ARES

ARES (Airborne Reflective/Emissive Spectrometer) is an airborne imaging spectrometer for remote sensing of land surfaces covering the wavelength regions 0.45–2.45?µm and 8–13?µm with 160 channels. The instrument is being built by Integrated Spectronics, financed by DLR and GFZ, and will be available to the scientific community from 2005 on.

This contribution presents the design of the thermal spectrometer covering the 8–13?µm region with 32 channels of 150?nm bandwidth while a separate paper treats the instrument specifications in the solar reflective region. The spectro‐radiometric design is based on scientific requirements derived from application scenarios comprising vegetation, soils of different compositions, and mineral exploration. The corresponding emissivity spectra are input for a simulation model that calculates at‐sensor radiance spectra, resamples them with the channel‐specific response functions, adds different amounts of sensor noise to the signal, and performs a retrieval to get the corresponding noisy surface emissivity spectra. The results of the simulation study indicate that a spectral wavelength accuracy of 3?nm and a sensor noise equivalent temperature of 0.05–0.1?K are required for an accurate retrieval of emissivity spectra.     

Correction of cirrus effects in Sentinel-2 type of imagery

Optical satellite images are often contaminated with cirrus clouds. Thin cirrus can be detected with a channel at 1.38 μm, and an established cirrus removal method exists for visible/near-infrared (VNIR) channels in atmospheric window regions, which was demonstrated with Moderate Resolution Imaging Spectrometer (MODIS) data. This contribution addresses open issues of cirrus correction for Sentinel-2 type of instruments, that is, future spaceborne sensors such as Sentinel-2 or similar instruments. These issues are (i) an extension of the existing technique to account for cirrus during the water vapour retrieval (channel at 0.94 μm) and surface reflectance calculation to avoid reflectance artefacts at 0.94 μm, (ii) a discussion of options concerning cirrus removal in the short-wave infrared (SWIR, channels at 1.6 and 2.2 μm) region and (iii) an analysis of channel parallax (view angle) requirements to achieve a high-quality cirrus removal.     

Control reconfiguration after actuator failures by Markov parameter matching

Two novel linear control reconfiguration methods for plants subject to actuator failures are described. The common idea is to place a reconfiguration block between the faulty plant and the nominal controller in order to re-route the signals around the broken actuator. The first method uses a computationally simple static reconfiguration block. It recovers the nominal plant input/output-behaviour by assigning the faulty plant the same Markov parameters as the faultless plant. The second method concerns the design of the feedforward part in the virtual actuator using the idea and results of the first approach. The virtual actuator is a dynamical reconfiguration block. Existence conditions and solution algorithms are provided, and it is shown that both approaches guarantee the closed-loop stability if the existence conditions are met. An experimental study demonstrates the practical usability of the proposed approaches.     

Diet effects in the asthma treatment: A systematic review

Introduction: Obesity in asthmatic patients has important relationships with asthma control, pulmonary function, and quality of life. The objective of this study was to conduct a systematic review of the literature on the effect of diet on asthma management in adults. Methods: We searched PubMed, Embase, and Scopus (January 1948–October 2014) for randomized clinical trials that evaluated the effects of diet in adults with asthma. Results: Of 12,215 studies identified, 21 were included. A reduction in weight of at least 7.5% from baseline as a result of caloric restriction can be beneficial for improving disease control, quality of life, and pulmonary function in obese patients with asthma. A dietary pattern rich in foods with potential antioxidant effect had an impact in improving asthma control, but with little clinical significance. Studies involving antioxidant supplementation showed improvements in asthma control with magnesium supplementation and less decline in lung function with vitamin C supplementation. Studies of fatty acid supplementation demonstrated effects on weight loss and improvement of asthma control and lung function. Studies of supplementation with propolis and caffeine reported significant increases in FEV1. Conversely, studies of high dietary salt intake reported greater declines in lung function. Conclusions: The evidence shows that, for obese adults with asthma, the best dietary intervention seems to be caloric restriction, regardless of specific dietary components.     

Influence of Molybdenum Silicide Additions on High-Temperature Oxidation Resistance of Silicon Nitride Materials

The influence of additions of molybdenum disilicide (MoSi₂) on the microstructure and the mechanical properties of a silicon nitride (Si₃N₄) material, with neodymium oxide (Nd₂O₃) and aluminum nitride (AIN) as sintering aids, was studied. The composites, containing 5, 10, and 17.6 wt% MoSi₂, were fabricated by hot pressing. All materials exhibited a similar phase composition, detected by X-ray diffractometry. Up to MoSi₂ additions of 10 wt%, mechanical properties such as strength, fracture toughness, or creep at 1400°C were not affected significantly, in comparison to that of monolithic Si₃N₄. The oxidation resistance of the composites, in terms of weight gain, degraded. After 1000 h of oxidation at 1400° and 1450°C in air, a greater weight gain (by a factor of approximately three) was obtained, in comparison to that of the material without MoSi₂. Nevertheless, after 1000 h of oxidation, the degradation in strength of the composites was considerably less severe than that of the material without MoSi₂. An additional layer was formed, caused by processes at the surface of the Si₃N₄ material, preventing the formation of pores, cracks, or glassy-phase-rich areas, which are common features of oxidation damage in Si₃N₄ materials. This surface layer, containing Mo₅Si₃ and silicon oxynitride (Si₂ON₂), was the result of reactions between MoSi₂, Si₃N₄, and the oxygen penetrating by diffusion into the material during the hightemperature treatment.