A New Temperature Compensating Method for Logarithmic Amplifier

A new method of temperature compensation for a dc logarithmic amplifier is presented. By this method temperature effect on both parallel shift and slope variance of log I vs. VBE curve can be compensated easily by using only one compensating resistor of copper wire wound type. (hereafter called parallel and slope compensations.) An absolute compensation condition can be determined for each type of logarithmic transistors, like silicon NPN, germanium PNP irrespective of current measuring range. The temperature dependence of the logarithmic amplifier is reduced to 0.01 decade for the temperature range from 0°C to 50°C and the current range from 10-11 to 10-3A.     

Aging and thermal stability of Mg/SiC and Mg/Y2O3 reflection multilayers in the 25-35 nm region

Reflection measurements in the 25-35 nm region were made for Mg/SiC and Mg/Y2O3 multilayers kept in a low-humidity atmosphere for 4 or 5 years. Aged Mg/SiC multilayers keep their reflectances, and the reflectance value at 31.2 nm is 0.44 at 10 degrees of the normal angle of incidence. Aged Mg/Y2O3 multilayers change reflectance as top layer materials, and the best value at 30.1 nm is 0.40 at 10 degrees. Reflection measurements are also made for Mg-based multilayers that are annealed from room temperature to 400 degrees C at 50 degrees C intervals. Both multilayers keep their reflectance at annealing temperatures of 200 degrees C. These results suggest that both Mg-based multilayers can be applied to practical optics.     

Nanoporous reactor with tunable selectivity on alkylation of ethylbenzene

As nanoporous reactor, mesoporous silicates containing aluminum acidic site with n(Si)/n(Al) ratio up to 7 (AISBA-15) were prepared through a simple one-pot synthesis, which was recently developed by parts of us. The obtained materials were satisfactorily characterized by XRD and nitrogen adsorption/desorption and have regularly arranged hexagonal structures with pore diameters in the 9.6-11.8-nm range. The density and strength of the acid sites were determined using temperature-programmed desorption (TPD) of pyridine and controlled distribution between weak, moderate, and strong acid sites was demonstrated. The alkylation of ethylbenzene in a fixed-bed flow-type reactor using the AISBA-15 nanoporous reactor was carried out under various conditions such as temperature, feed ratio, flow rate, and time on stream. Interestingly, perfect regioselectivity between the m-isomer and the o-/p-isomers of diethylbenzene was achieved, where 100% selectivity of the m-isomer or the o-/p-isomers can be obtained by simply tuning the reaction temperature by using AISBA-15 catalyst with appropriate aluminum content.     

Uniformity of flow from sheeting dies

A numerical method for analyzing the uniformity of flow from sheeting dies is presented. The method assumes that the flow is isothermal and that the material is a power law fluid. A uniformity index is defined and methods are presented which enable die dimensions to be established which will result in a specified uniformity at particular flow rates and pressure drops. The analysis shows that the flow index “n” of the power law is the key parameter determining the uniformity of flow from a sheeting die.     

Improved efficiency of polymer light-emitting diodes by inserting a hole transport layer formed without thermal treatment above glass transition temperature

We have demonstrated a significant improvement in the performance of polymer light-emitting diodes (PLEDs) by inserting the fluorene-triatylamine copolymer as hole transport layer (HTL) without a thermal treatment above the glass transition temperature (T_g). A thin HTL insolubilized by a thermal treatment above T_g is often inserted as an interlayer between an anode buffer layer and a light-emitting polymer (LEP) in PLEDs fabricated by using a conventional solution process. The evaporative spray deposition using ultradiluted solution (ESDUS) method has enabled fabricating polymer bilayer structure without an insolublizing procedure. The bilayer PLEDs fabricated by ESDUS without the thermal treatment showed significantly higher and more stable external quantum efficiency than PLEDs having the conventional interlayer. Thermal treatment above T_g of the copolymer would induce degradation of its hole injection property. Furthermore, ESDUS bilayer devices showed much higher power efficiency than interlayer devices when calcium was used for cathode. The improvements would be caused by the enhancement of hole injection and the effective electron blocking at the copolymer/LEP interface in the ESDUS bilayer devices.     

Reduction of temperature influence in stress measurement using surface SH‐wave acoustoelasticity

Stress measurements are required to prevent collapse accidents of structures. Surface SH‐wave acoustoelasticity can measure principal stress difference nondestructively and easily. Currently, surface SH‐wave acoustoelasticity can measure with high precision using a T‐type surface SH‐wave sensor in ideal environments such as in the laboratory. However, in actual environments, it cannot be measured with high precision due to change in the temperature of the specimen. In this paper, temperature dependence of surface SH‐wave acoustoelastic constants was verified to investigate the influence of specimen temperature on surface SH‐wave acoustoelasticity. In addition, the measuring system of surface SH‐wave acoustoelasticity using a cross T‐type surface SH‐wave sensor to reduce the influence of specimen temperature was developed.     

Effect of addition of corrosion inhibitors on corrosion behaviors of PCV material under diluted artificial seawater environment

ABSTRACT

Fukushima Daiichi nuclear power plants (1F) were damaged by unprecedented severe accident in the great east Japan earthquake, and seawater and freshwater had been injected as an emergency countermeasure for the core cooling. Although, the primary containment vessel (PCV) was not supposed to be exposed to diluted seawater, the PCV will be exposed to diluted seawater environment until fuel debris removal is completed. Therefore, it is necessary to establish a countermeasure of corrosion for the PCVs made of carbon steel. In this study, the effect of the addition of corrosion inhibitor, which is one of the corrosion countermeasures, was investigated by two types of corrosion tests. As a result of the immersion corrosion test, it was found that any of the three kinds of corrosion inhibitor could suppress corrosion of carbon steel. In addition, as a result of the inhibitor interim addition test, it was found that corrosion of carbon steel covered with corrosion products could be suppressed by optimizing the additive amount of corrosion inhibitor in the cooling water.     

快速凝固Fe-C-Si-Mo合金的晶化行为与硬度SCIEI

本文用单辊法制备了Fe-C-Si-Mo合金快速凝固薄带.研究了Fe-C-Si-Mo合金快速凝固薄带的晶化行为、相组成变化和硬度变化规律.经热处理后,该合金具有很高的Vickers硬度值,X射线衍射和SEM分析表明,硬度的提高是由于晶化时形成大量尺寸很小的碳化物。