Dynamic analysis of reinforced concrete frame-wall structures

The nonlinear response and failure mechanism of reinforced concrete frame-wall systems is investigated through the employment of a mathematical model. The mathematical model is composed of two mechanical models: a concentrated spring model used for the flexural behaviour of beam and column type members and a multiple spring model used for the response of the wall system. Both account for inelastic behaviour of reinforced concrete.The mathematical model is applied to a ten-storey frame-wall system. The constituent members are replaced by one of the mechanical models whose stiffness characteristics reflect the inelastic properties and hysteresis tendencies of the member. The resulting equations are solved by a step by step time integration procedure. Computed results are compared with experimental results obtained from a structure tested on the Illinois earthquake simulator. The correlated results are then used to define the significant response characteristics.     

Nanoarchitectonics,Method for Everything in Materials Science

Journal of Inorganic and Organometallic Polymers and Materials -     

Studies on suspension and emulsion. XLVI. Emulsifier-free emulsion polymerization of styrene in acetone–water

Emulsifier-free emulsion polymerization of styrene in acetone–water medium was carried out using potassium persulfate as initiator. Below acetone content of 40 vol %, stable emulsion was prepared and polymerizations were remarkably fast compared with those in pure water. The particle size decreased from 0.5 to 0.17 μm with an increase in acetone content in the range 0–40 vol %, and the distributions were very sharp. The optimum polymerization for the preparation of the stable emulsion was: styrene, 20 vol %; acetone/water, 40/60 (v/v); KPS, 3.4 × 10^?3 mole/l; temp., 90°C.     

Phase diagram calculations of ZrO2-based ceramics with an emphasis on the reduction/oxidation equilibria of cerium ions in the ZrO2-YO1.5-CeO2-CeO1.5 system

Phase diagram calculations that were made previously for the ZrO₂-MO _m/2 (m = 2, 3, 4) systems and for the ZrO₂-YO_1.5-MO _m/2 (M = transition metals) systems have been extended to the ZrO₂-YO_1.5-CeO₂(-CeO_1.5) system to make an attempt to explain (1) thermogravimetric (TG) results as a function of oxygen potential, (2) electronic conductivity as a function of oxygen potential, and (3) a miscibility gap observed in air. The interaction parameters for the CeO₂-CeO_1.5-YO_1.5 system were obtained from the reported oxygen nonstoichiometry in CeO_2−x and rate earth doped ceria, (Ce,RE)O_2−δ . The interaction parameters for the ZrO₂-CeO₂ subsystem were obtained so as to reproduce the observed miscibility gap at 1273 K. Those thermodynamic properties can reproduce consistently the experimental behaviors of the electronic conductivity and the TG results in the (Zr_1−x Ce _x )_0.8Y_0.2O_1.9 solid solutions; these indicate the enhancement of reduction of CeO₂.     

Potent Activation of Human but Not Mouse TRPA1 by JT010

Transient receptor potential (TRP) ankyrin repeat 1 (TRPA1), which is involved in inflammatory pain sensation, is activated by endogenous factors, such as intracellular Zn²⁺ and hydrogen peroxide, and by irritant chemical compounds. The synthetic compound JT010 potently and selectively activates human TRPA1 (hTRPA1) among the TRPs. Therefore, JT010 is a useful tool for analyzing TRPA1 functions in biological systems. Here, we show that JT010 is a potent activator of hTRPA1, but not mouse TRPA1 (mTRPA1) in human embryonic kidney (HEK) cells expressing hTRPA1 and mTRPA1. Application of 0.3–100 nM of JT010 to HEK cells with hTRPA1 induced large Ca²⁺ responses. However, in HEK cells with mTRPA1, the response was small. In contrast, both TRPA1s were effectively activated by allyl isothiocyanate (AITC) at 10–100 μM. Similar selective activation of hTRPA1 by JT010 was observed in electrophysiological experiments. Additionally, JT010 activated TRPA1 in human fibroblast-like synoviocytes with inflammation, but not TRPA1 in mouse dorsal root ganglion cells. As cysteine at 621 (C621) of hTRPA1, a critical cysteine for interaction with JT010, is conserved in mTRPA1, we applied JT010 to HEK cells with mutations in mTRPA1, where the different residue of mTRPA1 with tyrosine at 60 (Y60), with histidine at 1023 (H1023), and with asparagine at 1027 (N1027) were substituted with cysteine in hTRPA1. However, these mutants showed low sensitivity to JT010. In contrast, the mutation of hTRPA1 at position 669 from phenylalanine to methionine (F669M), comprising methionine at 670 in mTRPA1 (M670), significantly reduced the response to JT010. Moreover, the double mutant at S669 and M670 of mTRPA1 to S669E and M670F, respectively, induced slight but substantial sensitivity to 30 and 100 nM JT010. Taken together, our findings demonstrate that JT010 potently and selectively activates hTRPA1 but not mTRPA1.     

(-)-Deprenyl protects human dopaminergic neuroblastoma SH-SY5Y cells from apoptosis induced by peroxynitrite and nitric oxide

In Parkinson's disease the cell death of dopamine neurons has been proposed to be mediated by an apoptotic death process, in which nitric oxide may be involved. This article reports the induction of apoptosis by nitric oxide and peroxynitrite in human dopaminergic neuroblastoma SH-SY5Y cells and the antiapoptotic activity of (-)-deprenyl. After the cells were treated with a nitric oxide donor, NOR-4, or a peroxynitrite donor, SIN-1, DNA damage was quantitatively studied using a single-cell gel electrophoresis (comet) assay. NOR-4 and SIN-1 induced DNA damage dose-dependently. Cycloheximide and alkaline treatment of the cells prevented the DNA damage, indicating that the damage is apoptotic and that it depends on the intracellular signal transduction. Superoxide dismutase and the antioxidants reduced glutathione and alpha-tocopherol protected the cells from the DNA damage. (-)-Deprenyl protected the cells from the DNA damage induced by nitric oxide or peroxynitrite almost completely. The protection by (-)-deprenyl was significant even after it was washed from the cells, indicating that (-)-deprenyl may activate the intracellular system against apoptosis. These results suggest that (-)-deprenyl or related compounds may be neuroprotective to dopamine neurons through its antiapoptotic activity.     

High-precision voltage-measuring method using fast sampled data for electric power systems

Control and protection equipment in power systems requires higher sensitivity and operational reliability to meet today's changing power system requirements. The voltage-measuring deviation requirement for advanced voltage and var control equipment is less than 0.1 percent under conditions of harmonic distortion in the voltage waveform and power-system frequency variation. Studies on digital signal processing suitable for electric power systems showed that these requirements are satisfied using fast sampling and very fast 32-bit floating point operations by a Digital Signal Processor (DSP). This paper describes the design philosophy of a high-precision power system voltage-measuring method using fast sampled data. In addition, total voltage-measuring deviation characteristics under a combination of the techniques are described along with digital filter characteristics, frequency-measuring deviation characteristics, frequency variation versus gain-compensation characteristics of a digital filter, and peak value operating principles.     

A New Temperature Compensating Method for Logarithmic Amplifier

A new method of temperature compensation for a dc logarithmic amplifier is presented. By this method temperature effect on both parallel shift and slope variance of log I vs. VBE curve can be compensated easily by using only one compensating resistor of copper wire wound type. (hereafter called parallel and slope compensations.) An absolute compensation condition can be determined for each type of logarithmic transistors, like silicon NPN, germanium PNP irrespective of current measuring range. The temperature dependence of the logarithmic amplifier is reduced to 0.01 decade for the temperature range from 0°C to 50°C and the current range from 10-11 to 10-3A.     

Uniformity of flow from sheeting dies

A numerical method for analyzing the uniformity of flow from sheeting dies is presented. The method assumes that the flow is isothermal and that the material is a power law fluid. A uniformity index is defined and methods are presented which enable die dimensions to be established which will result in a specified uniformity at particular flow rates and pressure drops. The analysis shows that the flow index “n” of the power law is the key parameter determining the uniformity of flow from a sheeting die.