Large area thin film Si module

An initial efficiency of 14.1% (J_sc=13.6 mA/cm², V_oc=1.392 V, FF=74.3%) has been achieved for a-Si/transparent interlayer/poly Si solar cell (total area of 1 cm²). Both a-Si and crystalline Si films were fabricated by plasma chemical deposition at low temperature. The short circuit current was enhanced by the introduction of a transparent intermediate layer. An initial aperture efficiency of 11.7% has been achieved for 910×455 mm² a-Si/poly Si integrated solar cell submodule, where the laser-scribing techniques were applied for series interconnections. The results of our first run of 266 submodules in our pilot plant showed the average efficiency of 11.2%, which is applicable for mass production.     

Real-time PCB monitoring using time-of-flight mass spectrometry with picosecond laser ionization

The study demonstrates the applicability of laser ionization time-of-flight mass spectrometry for real-time measurement of polychlorinated biphenyls (PCBs). Picosecond 266-nm laser light ionization reduced fragmentation and provided very high PCB detection sensitivity. This high sensitivity has advantages in terms of real-time monitoring capability as compared to the conventional GC-ECD or GC-MS methods, which require at least several days for the analysis of PCBs. Detection sensitivity of under 0.01 mg/Nm3 was achieved with a 1-min measuring time; this sensitivity is superior to the exhaust gas control guideline of 0.15 mg/Nm3 by a factor of 10. A prototype PCB monitoring device has been developed and tested in a pilot PCB treatment plant. The 1-min detection time represents a substantial advance in the monitoring of exhaust gas and the workplace atmosphere in accordance with safety regulations.     

Fullerene Rosette: Two-Dimensional Interactive Nanoarchitectonics and Selective Vapor Sensing

The simplicity of fullerenes as assembled components provides attractive opportunities for basic understanding in self-assembly research. We applied in situ reactive methods to the self-assembly process of C₆₀ molecules with melamine/ethylenediamine components in solution, resulting in a novel type of fullerene assemblies, micron-sized two-dimensional, amorphous shape-regular objects, fullerene rosettes. ATR–FTIR spectra, XPS, and TGA results suggest that the melamine/ethylenediamine components strongly interact and/or are covalently linked with fullerenes in the fullerene rosettes. The broad peak for layer spacing in the XRD patterns of the fullerene rosettes corresponds roughly to the interdigitated fullerene bilayer or monolayer of modified fullerene molecules. The fullerene rosettes are made from the accumulation of bilayer/monolayer assemblies of hybridized fullerenes in low crystallinity. Prototype sensor systems were fabricated upon immobilization of the fullerene rosettes onto surfaces of a quartz crystal microbalance (QCM), and selective sensing of formic acid was demonstrated as preliminary results for social-demanded toxic material sensing. The QCM sensor with fullerene rosette is categorized as one of the large-response sensors among reported examples. In selectivity to formic acids against basic guests (formic acid/pyridine >30) or aromatic guests (formic acid/toluene >110), the fullerene rosette-based QCM sensor also showed superior performance.     

Nanoarchitectonics,Method for Everything in Materials Science

Journal of Inorganic and Organometallic Polymers and Materials -     

The high-frequency phenomenon of copper clad aluminum wires which are lower the alternating current resistance than copper solid wires,and the application of copper clad aluminum wires to the electrical equipment

The paper is proposed approximate formulas of the ac resistance of lead wires and coils which made by using copper clad aluminum (CCA) wires. There are the frequency range that the ac resistance of CCA wires is lower than it of cupper solid wires for lead wires and coils of an electrical equipment. It is shown that the application of CCA wires is economical as comparing with copper solid wires, if the design is due to successful calculation in the electrical equipment. The measured resistance is compared with the formula. CCA wires is an example of multiple conductors which shall be expected to apply in future.