Production and properties of phytase and acid phosphatase from a sake koji mold, Aspergillus oryzae

We identified three types of acid phosphatase (ACP-I, ACP-II, and ACP-III) produced by Aspergillus oryzae in a submerged culture using only phytic acid as the phosphorous substrate. The optimum pH for the activities of the three enzymes was in the range of 4.5 to 5.5. Analysis of the substrate specificities of these enzymes revealed that ACP-I and ACP-III were acid phosphatases, and ACP-II was a phytase. These enzymes were produced during different periods of mycelial growth: ACP-II was produced during the early phase of cultivation (around 24 h), and ACP-I was produced between 24 to 72 h. ACP-III was detected after the production of ACP-I and ACP-II had ceased. The release of phosphate from phytic acid was expected to be due to the cooperative hydrolysis of these enzymes.     

Micro-flowers of poly(p-phenylene pyromelliteimide) crystals

Morphology control of poly(p-phenylene pyromelliteimide) (PPPI) crystals was examined using reaction-induced crystallization of oligomers during solution polymerization of self-polymerizable N-(4′-aminophenyl)-3-carboxyl-4-alkoxycarbonylphthalimide. Micro-flowers of the PPPI needle-like crystals were formed in which the needle-like crystals grew radially from the center part as petals. The molecules aligned regularly along the long axis of the needle-like crystal. The structure of alkoxy group in the monomer and the monomer concentration influenced the size of the needle-like crystals, and their average length and width were changeable from 640 nm to 1.69 μm and from 110 nm to 210 nm, respectively. The average thickness was 20 nm. The obtained micro-flowers possessed high crystallinity and exhibited excellent thermal stability.     

Effects of CdS buffer layers on photoluminescence properties of Cu(In,Ga)Se2 solar cells

Photoluminescence (PL) have been studied on Cu(In,Ga)Se₂ (CIGS) thin films, CdS/CIGS and CIGS solar cells, to clarify the carrier recombination process. The chemical-bath deposition (CBD) of the CdS buffer layer on the CIGS thin film leads to (i) the enhancement of near-band-edge PL intensity by a factor of 2–3, (ii) change in energy of the defect-related PL and (iii) the slight change in the decay time. They are related not only to the minimization of the surface recombination but also to the modification of native defects at the Cu-poor surface of CIGS by the occupation of Cd atom at the Cu site. A donor–acceptor pair PL at low-temperature and temperature-dependent PL have been studied. They are discussed in terms of the impurity and defect levels created in the CIGS film during the CBD-CdS process.     

Power system control method using customers' energy storage systems and the verification of proposed method

Advanced energy storage systems have been widely applied to industries and are being installed at large buildings and factories to realize efficient energy usage. This paper presents a control method involving load frequency control and distribution network control (loss reduction control) using a part of customers' owned battery capacity. When 10% of total battery capacity of 100 MW in a network of 30‐GW generator capacities is used for load frequency control, a total of 1500‐MW generation units for load frequency control, at maximum, can be stopped without deterioration of power quality. In addition, when batteries are used for loss reduction in a distribution network, 2% of the loss on a summer day can be reduced. To realize both effects to their fullest, a novel integrated control algorithm is proposed and its economic effect is evaluated by numerical simulations. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 165(4): 11–20, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20704     

Phase diagram calculations of ZrO2-based ceramics with an emphasis on the reduction/oxidation equilibria of cerium ions in the ZrO2-YO1.5-CeO2-CeO1.5 system

Phase diagram calculations that were made previously for the ZrO₂-MO _m/2 (m = 2, 3, 4) systems and for the ZrO₂-YO_1.5-MO _m/2 (M = transition metals) systems have been extended to the ZrO₂-YO_1.5-CeO₂(-CeO_1.5) system to make an attempt to explain (1) thermogravimetric (TG) results as a function of oxygen potential, (2) electronic conductivity as a function of oxygen potential, and (3) a miscibility gap observed in air. The interaction parameters for the CeO₂-CeO_1.5-YO_1.5 system were obtained from the reported oxygen nonstoichiometry in CeO_2−x and rate earth doped ceria, (Ce,RE)O_2−δ . The interaction parameters for the ZrO₂-CeO₂ subsystem were obtained so as to reproduce the observed miscibility gap at 1273 K. Those thermodynamic properties can reproduce consistently the experimental behaviors of the electronic conductivity and the TG results in the (Zr_1−x Ce _x )_0.8Y_0.2O_1.9 solid solutions; these indicate the enhancement of reduction of CeO₂.     

Relationship between weight change in young adulthood and the risk of NIDDM. The Sotetsu Study

OBJECTIVE: To investigate the independent effect of weight change in young adulthood on the risk of prevalent NIDDM among middle-aged Japanese men. RESEARCH DESIGN AND METHODS: A case-control study was carried out in 895 male employees aged > or = 30 years of a railway company located in the vicinity of Tokyo. Adjusted odds ratios (ORs) were calculated for prevalent diabetes in each category of weight change (obtained from subjects' medical records) in young adulthood and adulthood. Adjustment for current age, initial BMI, and weight change in each age stratum was performed by the Mantel-Haenszel method or multiple logistic regression analysis. RESULTS: Weight change between 20 years of age and the age at maximum weight was not associated with the risk of NIDDM. Weight gain between 20 and 25 years of age was significantly and positively associated with the risk of NIDDM (OR 3.87 for gains > or = 10.0 kg, 2.53 for gains of 5.0-9.9%, and 3.73 for gains > or = 10.0%). On the other hand, moderate weight gain after 30 years of age was significantly inversely associated with NIDDM (OR 0.44 for gains of 5.0-9.9 kg, 0.15 for gains of 10.0-19.9%, and 0.38 for gains of 20.0-29.9%). CONCLUSIONS: Extreme weight gain between 20 and 25 years of age is a significant predictor of NIDDM, independent of current age, BMI at 20 years of age, and weight change within other age strata.     

Respiratory burst assay of head kidney macrophages of ayu, Plecoglossus altivelis, stimulated with Glugea plecoglossi (Protozoa: Microspora) spores

The respiratory burst assay was conducted using the nitroblue tetrazolium reduction method and horseradish peroxidase method to investigate the events when ayu head kidney macrophages phagocytize fresh and formalin-killed Glugea plecoglossi spores. The production of O2 against G. plecoglossi spores was negligible compared to zymosan (P < 0.01). Zymosan-induced O2 production was markedly inhibited by adding G. plecoglossi spores simultaneously (P < 0.01). This phenomenon was dose dependent, and killed spores were less inhibitory than fresh spores. The production of H2O2 was drastically increased when G. plecoglossi spores were added (P < 0.01), and most spores were phagocytized. From these results, it is suggested that G. plecoglossi spores modulate the host's phagocytic response to establish infection.     

The effect of ulinastatin on CFU-C colony formation in mouse myelocyte cultures

The mixture of 5'-guanylylimidodiphosphate (Gpp(NH)p)/EDTA/NaCl has been used to delineate low-affinity conditions for agonists binding to G-protein-linked receptors. The effects of this mixture on [3H]RX821002 (2-methoxyidazoxan) binding to alpha2-adrenoceptors were evaluated in different tissues. The density of alpha2-adrenoceptors in the presence of the mixture was 11, 78 and 60% higher in human cortex (predominant alpha2A), human caudate (alpha2A + alpha2C) and rat kidney (alpha2A + alpha2B), respectively, than in its absence. In rat kidney, masking of alpha2B-adrenoceptors by ARC239 (2-[2-[4-(o-methoxyphenyl)-piperazin-1-yl]-ethyl]-4,4-dimethyl-1,3 -(2H,4H)-isoquinolindione) (50 nM) or masking of alpha2A-adrenoceptors by BRL44408 (2-[2H-(1-methyl-1,3-dihydroisoindole)methyl]-4,5-dihydroimidaz ole) (100 nM) demonstrated that the increase was in the alpha2B-adrenoceptor but not in the alpha2A-adrenoceptor subtype.     

A Method to Identify Steady Creep Strain from Indentation Creep Using a New Reference Area of Indentation

For the design of high-density electronic packages, finite element method (FEM) analyses to evaluate strength reliabilities of solder joints should be conducted by employing the material parameters which can precisely reflect the creep properties of solder joints in actual electronic equipment. To obtain accurate results of the structural analyses of the solder joints, a method to evaluate the steady-state creep deformation in situ must be developed. The indentation creep test is an effective method to evaluate the creep properties of the solder joints in situ; however, the creep properties obtained by this method do not give the same results as those obtained by tensile creep tests using bulk specimens. In this paper, the indentation creep test at 1 N loading for 9,000 s duration was experimentally conducted to confirm that the steady-state creep deformation obtained by the indentation creep test did not coincide with that by the tensile creep tests using bulk specimens. To identify the reason, the indentation creep simulation was conducted by FEM analysis. As a result, it was found that the reference area used to obtain the creep strain from the indentation creep test should be modified. A method to obtain the new reference area is proposed from comparisons of experiments with simulations. Finally, this paper shows that the creep properties obtained by the indentation creep test using the new reference area coincided with those obtained by tensile creep tests using bulk specimens.