Synthesis and electrode performance of layered nickel dioxide containing alkaline ions

Several polymorphs of layered nickel dioxide were prepared by using the chemical insertion of alkaline ions into Li_0.10NiO₂. We used aqueous AOH (A = Li, Na, K) solutions as reducing agents. Sodium and potassium insertion resulted in hydrated layered compounds that can be classified as γ-NiOOH with high crystallinity, while lithium insertion occurred without hydration. We discuss the coordination environment around the A⁺ ions for these inserted compounds. The thermal behavior, analyzed using high temperature (HT) X-ray diffraction (XRD) and thermogravimetric (TG) measurements, indicated that heating the hydrate at 150 °C yielded its dehydrate. The electrode performance of the nickelate was studied in lithium cells. We discuss the effect of interlayer water on cell rechargeability and the similarity between these nickelate and hydrated manganese dioxide (birnessite).     

A negative resist for KrF excimer laser lithography

The design and preparation of a series of negative resists for KrF excimer laser lithography are described. Each resist is composed of poly(hydroxystyrene) and an aromatic azide. The base resin shows high transmittance of 62%/μm at 248 nm, when p-ethylphenyl p-azidophenylsulfonate. 4-azido-4α-methoxy-chalcone, 1-(4 azidobenzylidene)-3-(α-hydroxy-4-azidobenzyl)-indene, 4,4α-diazido-3,3α-dimethoxybiphenyl, or 1-(4-azidostyryl)-5, 5-dimethyl-2-cyclohexen-1-one is employed as a sensitizer. These azides are obtained by red-shifting the absorption maxima to lower energy regions than the exposing wavelength of 248 nm. Transmittance of resists can be controlled from 10 to 30%. The resist is exposed with a KrF excimer laser stepper and developed in an alkaline solution. Sensitivities of about 15 mJ/cm² are observed. A good, subhalf-micron resist profile is achieved. The photochemical reaction mechanisms of poly(hydroxystyrene) and 4,4α-diazido-3,3α-dimethoxybiphenyl were studied at 248 nm and 313 nm exposure. Quantum yield for photodecomposition at 248 nm is seven times larger than that at 313 nm, but dissolution-inhibition effects are larger at 313 nm exposure. Consequently, the resist shows higher sensitivity at 313 nm than at 248 nm.     

Solution properties of polymacromonomers consisting of polystyrene

Summary Dynamic light scattering measurements have been made on 14 samples of a polymacromonomer consisting of polystyrene with 15 styrene side-chain units in cyclohexane at 34.5°C (the theta point) to determine the translational diffusion coefficient D as a function of molecular weight. The dependence of D on the main-chain length is analyzed on the basis of the wormlike chain by taking into account the end effect arising from side chains near the main-chain ends. The model parameters describing this dependence, i.e., the Kuhn segment length (11.5 ± 1.5 nm), the linear mass density (5600 ± 700 nm⁻¹), the diameter (5.2 ± 0.5 nm), and the end-effect parameter δ (2.5 ± 0.3 nm), are close to those determined previously from <S ²>_z (the z-average mean-square radius of gyration) and [η] (the intrinsic viscosity), leading to the conclusion that the wormlike chain model is capable of consistently explaining <S ²>_z, [η], and D of the polymacromonomer in the Θ solvent. Received: 8 February 2000/Accepted: 18 February 2000     

Copolycondensation of IPA/TPA,BPA, and 4,4′‐dihydroxydipehnylsulfone and 4,4′‐dicarboxydiphenylsulfone

Copolycondensations of IPA, TPA, bisphenol A (BPA), and several cimonomers were carried out to improve thermal properties, such as, the glass transition temperature (T_g) of the IPA/TPA (50/50)–BPA polyester. Among the comonomers examined, 4,4′‐Dihydroxydiphenylsulfone (BPS) and 4,4′‐Dicarboxydiphenylsulfone (DCDPS) having a strongly dipolar sulfonyl group in the chain were significantly effective. The favorable effect upon the T_gs was studied by varying the amounts of BPS and DCDPS incorporated into the copolymers. In the copolycondensation with BPS, two‐stage copolycondensation of BPA first and then BPS, the reverse order of reaction, and their spontaneous addition were examined to investigate the effect of distribution of the BPS unit segments in the copolymer upon the T_gs of the resulted copolymers. The distribution was briefly studied from distribution of the IPA/TPA‐BPA oligomers in the initial reaction using GPC. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 875–879, 2000     

Formation of Exclusive Al2O3 Scale on Nb and Nb-Rich Alloys by Two-Step Oxygen–Aluminum Diffusion Process

External Al₂O₃ scale formation behavior by a diffusion aluminizing process on Nb and Nb–X (X?=?Mo, Re, and Ta) alloys with different oxygen solubilities was investigated. The oxygen content in Nb and Nb–X alloys was controlled by oxygen diffusion treatment at 1,100?°C using Nb/NbO mixture. Nb–aluminide, NbAl₃ and Nb₂Al, layers were developed on the low-oxygen Nb substrate by an aluminum diffusion treatment using Al/Al₂O₃/NH₄Cl mixture at 1,100?°C; whereas an adhesive Al₂O₃ scale developed on the Nb substrate with higher oxygen content. The alloy oxygen content decreased by an addition of Ta, Mo and Re, in this order, and the decrease in alloy oxygen content resulted in the transition of Al₂O₃ formation from external scale to internal precipitates. This transition was not observed when low Al activity powder mixture, Ni50Al/Al₂O₃/NH₄Cl, was used for Al diffusion process, and only external Al₂O₃ scale was developed on all samples. In the present study, the effects of oxygen solubility limit, oxygen content, and the activity of Al in diffusion process on the formation of Al₂O₃ scale will be discussed.     

In situ X-ray diffraction of surface oxide on type 430 stainless steel in breakaway condition using synchrotron radiation

Changes in the crystal structure of type 430 stainless steel and the oxides on its surface were studied in situ at 1373 K using a high-intensity synchrotron X-ray source provided by SPring-8 in Japan. The surface of the steel was initially covered with Cr₂O₃, which was then converted to FeCr₂O₄, and finally Fe₃O₄ and Fe₂O₃ formed on it. These results indicated that the reason for the breakaway oxidation in type 430 stainless steel is Cr depletion beneath Cr₂O₃ layer and the subsequent ionisation of Fe, not the simple mechanical failure of Cr₂O₃.     

“Click Peptide“: pH‐Triggered in Situ Production and Aggregation of Monomer Aβ1–42

Into neutral : We demonstrate the unique features of a pH click peptide based on an O‐acyl isopeptide method. Under acidic conditions, the click peptide remains in a monomeric form. Upon increase of the pH to 7.4, the click peptide is quickly able to convert into Aβ1–42 through an O‐to‐N intramolecular acyl migration. Further study using this pH click peptide would elucidate the pathological role of Aβ1–42 in Alzheimer's disease.

     

A drag correlation of fluid particles rising through stagnant liquids in vertical pipes at intermediate Reynolds numbers

A drag correlation for a fluid particle rising along the axis of a vertical pipe at low and intermediate Reynolds numbers, Re, is proposed by making use of available correlations and a numerical database accumulated by interface tracking simulations. The accuracy of the interface tracking method has been verified through comparisons between measured and predicted velocities of single drops in vertical pipes. Being similar to drag model for solid spheres proposed by Michaelides, the developed drag correlation takes into account inertial and wall effects as their linear combination. The correlation gives good estimation of the drag coefficient for fluid particles rising through stagnant liquids in vertical pipes under the conditions of 0.13?Eo?30, −10.0?log M?2.0, 0.083?Re<200, 0?κ?10.0 and λ?0.6, where Eo is the Eötvös number, M the Morton number, κ the viscosity ratio and λ the ratio of particle diameter to pipe diameter.     

Synthesis of novel UV-curable difunctional thiourethane methacrylate and studies on organic–inorganic nanocomposite hard coatings for high refractive index plastic lenses

This study relates to the development of ultraviolet (UV)-curable, organic–inorganic nanocomposite hard coatings for plastic lens substrates, especially for polythiourethane (PTU) and polycarbonate (PC). Novel difunctional thiourethane methacrylate (mercaptoethylsulfide-thiourethane methacrylate: coded MES-TUMA and isophorone diisocyanate-mercaptoethylsulfide-thiourethane methacrylate: coded IPDI-MES-TUMA) was synthesized to enhance the adhesive strength for PTU. On the basis of IR, ¹H NMR, electron spray ionisation-mass spectrometry (ESI-MS) analysis and gel permeation chromatography (GPC), the expected structures were confirmed. These difunctional thiourethane methacrylates were easily mixed with multifunctional urethane acrylate, surface-modified ZrO₂–TiO₂ nanoparticles and photoinitiator in coating formulations. The UV-cured organic–inorganic nanocomposites were very useful as hard coatings for high refractive index plastic lenses such as PTU and PC.     

Fast and Almost Complete Nitridation of Mesoporous Silica MCM-41 with Ammonia in a Plug-Flow Reactor

The title reaction proceeded well to yield silicon (oxy)nitride at 973–1323 K using a plug-flow reactor. The degree of nitridation was studied as a function of temperature and time of nitridation, the sample weight, and the flow rate of ammonia. It was dependent on the reaction temperature and the amount of ammonia supplied per sample weight. The nitridation at 1273 K for 10–25 h yielded the oxynitride with 36–39 wt% nitrogen, which was very close to 40 wt% of Si₃N₄. Characterization with X-ray diffraction, field-emission scanning electron microscopy and transmission electron microscopy measurements, and nitrogen adsorption revealed the conversion of MCM-41 to the corresponding oxynitride without essential loss of the mesoporous structure, the decrements of the lattice constant and the pore diameter by 20–35%, and the increments of the wall thickness by ca. 45%. Solid-state ²⁹Si nuclear magnetic resonance spectra during the nitridation clearly showed fast decrease in SiO₄ species and slow in SiO₃(OH). Various intermediate species, SiO _x N _y (NH₂ or NH) _z , were observed to be formed and finally, ca. 70% SiN₄ species, ca. 20% SiN₃(NH₂ or NH), and ca. 10% SiON₂(NH₂ or NH) were produced, being consistent with the results of the above mentioned elemental analysis.