Regionalization of Rainfall Intensity-Duration-Frequency using a Simple Scaling Model

Design storm is one of the most important tools to design hydraulic structures, hydrologic system and watershed management, mostly extracted by intensity- duration - frequency (IDF) curves for a given specific duration and return period. As for conventional methods to calculate IDF curves, the precipitation should be recorded for different durations so that foregoing curves can be extracted. Such data can be collected from rain gauge stations. In many areas, just daily precipitation data are available by which IDF curves cannot be extracted as per conventional methods. The aim of this research is to make IDF curves for short-term durations according to time scaling model as well as daily rainfalls. The relationships of this method are characterized with three variables including mean (μ ₂₄) and standard deviation (σ ₂₄) of daily rainfall intensity, and scaling exponent (H) by which all IDF curves might be drawn. The method used in present paper entails for less computational steps than conventional methods and by far has low parameters considerably than others in turn increases reliability. Scaling method is used to extract the IDF curves in rain-gauge stations in Khuzestan province located in southwest Iran and results proved the efficiency and robustness of the scaling method. Also ability of scaling concept method was examined in constructing of regional IDF.     

Thermal and rheological characteristics of CuO–Base oil nanofluid flow inside a circular tube

In the present experimental investigation, stable CuO–Base oil nanofluids with different particle weight fractions of 0.2% to 2% are prepared. Then, these fluids are used for heat transfer measurements as well as rheological behavior investigation. Density, thermal conductivities, viscosities and specific heat capacities of base fluid and all nanofluids at different temperatures are measured and the effect of nanoparticles concentration on fluid properties is investigated. Also, heat transfer characteristics of CuO–Base oil nanofluids laminar flow in a smooth tube under constant heat flux are studied experimentally. Experimental results clearly indicate that addition of nanoparticles into the base fluid enhances the thermal conductivity of the fluid and the enhancement increases with increasing of particle concentration. For the particle concentrations tested, nanofluids exhibit Newtonian behavior. It is observed that the dynamic viscosity substantially increases with the increase in nanoparticle concentration and this increase is more pronounced at the lower temperatures of the nanofluid. The specific heat capacity of nanofluids is significantly less than that of base fluid and it is decreased with the increase in nanofluid concentration. The results show that for a specific nanoparticle concentration, there is an increase in heat transfer coefficient of nanofluid flow compared to pure oil flow. A maximum increase of 12.7% in Heat Transfer coefficient was observed for 2 wt.% nanofluid at the highest Reynolds number studied in this investigation. Furthermore, heat transfer coefficients obtained using experimental fluid properties are compared to those obtained using the existing theoretical models for fluid properties.     

Microbeam analysis of lateral inhomogeneity in depth penetration of Pd in porous silicon

Porous silicon (PS) is widely utilized in gas sensors. Palladium is a good choice to sensitize the surface of PS to hydrogen. Ideally for highest sensitivity of the sensor, all the pores of PS should be completely covered with palladium. Rutherford backscattering spectroscopy (RBS) technique is routinely used to determine depth profile of elements in thin layers. By using microbeam analysis as a complementary technique, we clearly observed the lateral image of penetrated Pd in depth. In this work, we used electrochemically anodized-silicon wafer doped with Pd by the electroless process. In our analysis, we intentionally characterized both the area of PS where Electric Field is applied during silicon etching (EF area) and the Field Free region (FF area) of the sample. Microbeam analysis show that EF area of the sample is covered with thicker palladium layer, but the pores are rarely filled in this area, while in the FF area of the sample, there is a thin palladium film on the silicon surface, but the pores are partially filled. We used a computational simulation method based on columnar pore structure and linear variation of Pd depth profile in pores and determined the lateral variation of Pd penetration in pores in both parts of the sample. These simulations showed that there are 180 ± 80 nm thick Pd layer with 300 ± 200 nm penetration in pores in EF region and 80 ± 40 nm thin Pd layer with 800 ± 200 nm penetrate in pores in FF region.     

A deep multimodal system for provenance filtering with universal forgery detection and localization

Multimedia Tools and Applications - Traditional multimedia forensics techniques inspect images to identify, localize forged regions and estimate forgery methods that have been applied. Provenance...     

Chaotic imperialist competitive algorithm for optimum design of truss structures

The imperialist competitive algorithm is a new socio-politically motivated optimization algorithm which recently is applied for structural problems. This paper utilizes the idea of using chaotic systems instead of random processes in the imperialist competitive algorithm. The resulting method is called chaotic imperialist competitive algorithm (CICA) in which chaotic maps are utilized to improve the movement step of the algorithm. Some well-studied truss structures are chosen to evaluate the efficiency of the new algorithm.     

Laboratory evaluation of the effect of bentonite on performance of bitumen and hot mix asphalt mixtures

In this research study, bentonite additive was used to modify original binder (60–70 penetration grade). The experimental program included use of five percentages of bentonite (10%, 15%, 20%, 25%, and 30%) by weight of bitumen. Physical properties of modified and unmodified bitumen were evaluated through penetration grade, softening point, ductility, and temperature susceptibility tests. The performance characteristics of mixtures were determined through indirect tensile strength, resilient modulus, and moisture susceptibility tests. The results demonstrate that addition of bentonite improves Marshall stability, tensile strength, and resilient modulus of mixtures, but led to decrease the resistance to moisture damage.     

Identification of O-sulphate substituents on D-glucuronic acid units in heparin-related glycosaminoglycans using novel synthetic disaccharide standards

BACKGROUND: Serum levels of soluble interleukin-2 receptor (sIL-2R) seem to serve as a marker for the activation of T lymphocytes. The aim of this study was to evaluate the clinical significance of such levels in patients with chronic hepatitis C (CHC) treated with interferon. METHODS: We measured serum levels of sIL-2R in 37 patients with CHC before and after treatment with recombinant interferon-alpha. Serum receptor levels were then compared with the response of the hepatitis C virus (HCV)-RNA level in serum after interferon. RESULTS: Receptor levels were significantly higher in the patients with chronic persistent hepatitis and chronic active hepatitis than in normal controls (p < 0.01). There was a weak correlation between serum sIL-2R and alanine aminotransferase (ALAT) levels (r = 0.14, p = 0.010). Patients were then classified into three groups on the basis of the effect of interferon treatment on HCV-RNA levels in serum: sustained response (SR; n = 21), non-sustained response (NSR; n = 14), and nonresponse (NR; n = 2). Before and during interferon treatment the serum sIL-2R level remained increased in the SR group and in the combined groups with NSR or NR. However, after interferon was withdrawn, the serum sIL-2R decreased in the SR group but remained significantly increased in the combined response group (p < 0.01-0.05). CONCLUSION: This finding seems to reflect the disappearance of HCV-RNA from the serum of the patients with an SR, and monitoring of sIL-2R levels may therefore be of value as an adjunct to the measurement of serum ALAT and HCV-RNA in evaluating the response to the interferon therapy for CHC.     

A two‐layer beam‐steering array antenna with 4 × 4 modified Butler matrix fed network for switched beam application

This paper presents a novel two layers beam‐steering array antenna fed by a 4 × 4 modified Butler matrix. Each of the radiation elements have been replaced by a collection of 2 × 2 circularly polarized (CP) square patches, which joined together by a modified sequentially rotated feed network. The antenna array consists of 2 × 5 CP square patches, which connected to four ring sequential rotation and fed by butler matrix. The proposed Butler matrix which plays a role as beam‐steering feed network consists of four novel 90° circular patch couplers and two 45° half circular patch phase shifter. Altogether, using of a 2 × 5 phased array antenna and a modified Butler matrix cause to empower array antenna for covering frequency range between 4.67 to 6.09GHz, the maximum gain of 14.98 dB and 3‐dB axial ratio bandwidth of 1.2GHz (4.9~6.1GHz) is attained.