Causes and Effects of Uncontrolled Water Inrush into a Decommissioned Mine Shaft

Central Europe experienced catastrophic rainfalls and flooding in 2010. This paper discusses a decommissioned shaft that was flooded by surface water, which led to displacement of shaft backfill and an inrush of large amounts of water into an underground pumping station. The weather conditions for the period preceding the inrush, the hydrogeological conditions, the quantity of water that entered the mine dewatering systems, and the underground hydraulic connections are all described. Uncontrolled inflow of water as a cause of backfill saturation and the hazard for active underground infrastructure were analysed. A need to rebuild damaged infrastructure was identified. The case study highlights the need to improve underground mine closure requirements to ensure safe conditions above ground, particularly in densely populated areas.     

Non-contact methods of measuring moisture concentration in external layers of building partitions: III—Water vapour condensation on the cementitious surfaces

This paper presents the results of the larger study into a potential application of laser radiation for the detection of phase transition processes in low temperatures occurring on the surface layers of cementitious materials. An attempt was made to identify relationships between the environmental conditions—temperature and air humidity, and the selected parameters of the reflected light. Onset of the condensation process and formation of water microdrops on the surface of the material leads to the phase displacement of individual laser rays, which are represented by different speckle images.

Although the analysis of parameters of the reflected light are very difficult in the case of porous materials because of highly developed roughness of the surface structure it has been proved that a dynamic study of the phase transition phenomena can be successfully carried out without mechanical intervention.     

In vitro availability of minerals from oat products

The content of macroelements P, Mg and Ca and microelements Mn, Fe, Zn and Cu was determined in 10 commercially sold oat products made by different technological processes (dehulling, instantinising, extrusion, flaking). Phosphorus was the most prevalent of the macroelements (from 240.8 ± 2.2 to 845.5 ± 8.1 mg per 100 g), followed by magnesium (from 73.2 ± 0.7 to 271.9 ± 2.7 mg per 100 g) and calcium (from 30.69 ± 0.01 to 112.7 ± 0.3 mg per 100 g). The Ca/P ratio ranged from 1:5.3 in crushed oat to 1:8.2 in oat flakes. Regarding the microelements, manganese was present at the highest concentrations (from 2.62 ± 0.02 to 8.69 ± 0.01 mg per 100 g). The content of iron was similar and that of zinc not much lower, whereas the amount of copper was considerably smaller (from 0.23 ± 0.002 to 0.59 ± 0.002 mg per 100 g). The highest concentrations of mineral elements were found in instant oat bran flakes and the lowest in extruded oat and corn crisps containing 50% corn grouts. Samples of the products analysed were subjected to in vitro enzymatic digestion, simulating the digestive process occurring in the human alimentary tract. The supernatants thus obtained were analysed for their content of the previously determined mineral components; the percentage of minerals released from the products was calculated. The following sequence of mineral components released was observed: Cu (57.2–95.6%) > P (39.7–60.9%) > Ca (18.2–39.5%) > Mg (16.4–39.8%) > Mn (6.4–24.7%) > Fe (6.5–29%) > Zn (11–17.2%). The Ca/P ratio in the supernatant worsened from 1:8.2 in crushed oat to 1:23.3 in extruded oat and corn crisps. Crushed oat released the highest amounts of mineral elements during enzymatic hydrolysis, with oat grouts coming second. As regards the other products, it is difficult to establish their relative sequence in the release of minerals. © 2002 Society of Chemical Industry     

The role of microstructure on pesting during oxidation of MoSi2 and Mo(Si,Al)2 at 773 K

The pesting behavior of MoSi₂ and Mo(Si,Al)₂ has been examined in air at 773 K to clarify the origin and mechanism of pesting phenomena and the effect of aluminum on pesting phenomena. The initial cracks play a much more important role than the grain boundaries and the initial oxide layer in pesting. Mo and Si oxidize to amorphous Mo-Si-O simultaneously with about a 200% volume expansion. Therefore, large stress appears at the cracktips and induce many new cracks. MoO₃ vaporizes from the Mo-Si-O layer on the external surface and crack surfaces causing the oxides in the initial cracks to become porous. Oxygen has a short-circuit path to enter the sample in the cracks. Therefore, the partial pressure of oxygen is sufficiently high to allow oxidation of Mo in the materials. The platelet-like MoO₃ grows on the external surface and also in the cracks. Finally, the sample distintegrates into powder. Pesting of Mo(Si,Al)₂ occurs in the same way, however, its rate is much lower than that of MoSi₂. The role of Al is to decrease the initial crack density of the samples from the melt. Other effects of Al might be to decrease the oxygen flux toward the oxide-intermetallic interface and to increase the plasticity of the amorphous oxide being formed in the cracks.     

Lithography using nano-lens arrays made of light

Abstract

We present a detailed analysis of the appearance intensities for various ion species in strong field multiple ionization based on the Thomas-Fermi model of the atom electronic cloud. Our results differ significantly from the results of a simpler model presented recently. A new range of validity for the adiabatic approximation has been found.     

Quantitative microstructural characterisation of Fe–30Ni alloy after martensitic transformations by means of stereological and magnetic methods

In the Fe–30Ni alloy investigated a martensitic transformation can occur both during quenching or plastic deformation. Martensite formed during plastic deformation, depending on the thermo-mechanical treatment applied, exhibits a different morphology from that achieved during quenching and forms the so-called composite-like structure. The morphology and volume fraction of martensite depends both on strain and temperature. In the present studies Fe–30Ni alloy was deformed by monotonic rolling in one path and perpendicular rolling in the temperature range M_D–M_S. The aim of the investigations was a determination of martensite volume fraction depending on the strain and temperature. To examine the influence of strain, the alloy was deformed by rolling in one path or perpendicular rolling at a temperature of − 30 °C, in the strain range of 10–30%. The dependence of temperature was investigated by rolling with 30% strain in a temperature range from − 30 °C to − 80 °C. The variants of thermo-mechanical treatment performed enabled us to achieve different martensite morphologies and volume fractions. Microstructural analysis was performed by means of light microscopy and transmission electron microscopy. The results of quantitative microstructural analysis of martensite and retained austenite volume fractions formed in different thermo-mechanical treatments were compared with those obtained by magnetic measurements. The fraction of deformation-induced martensite determined varied from 2% to 86%. The partial volume fractions V_V^MF of martensite formed in different deformation directions were also determined. It was found that the influence of the temperature on the martensite volume fraction is more pronounced than the influence of strain.     

Three‐Dimensional Internal Order in Multiwalled Carbon Nanotubes Grown by Chemical Vapor Deposition (Adv. Mater. 6/2005)

Unprecedented levels of internal order are obtained in multiwalled carbon nanotubes grown by chemical vapor deposition with a nitrogen‐doping level of 3% in work reported by Windle and co‐workers on p. 760. Not only is each of the tubular layers of the same orientation (chirality), but they also appear to be in three‐dimensional crystallographic register with one another as shown by the hkl reflections on the cover. The tubes are also straighter and thicker than pure carbon equivalents. The layers are either pure zigzag or pure armchair with spacings close to that of graphite.     

Finite element approach to steady-state vibrations in a fluid of finite depth

The paper deals with the finite element analysis of waves in a semi-infinite layer of fluid. The aim of the considerations is to examine the problem of irregular spacing of points in the layer and its influence on results of numerical solutions. It is shown that introduction of a nonhomogeneous spacing of points in the layer introduces a nonhomogeneity into the field. The discrete system may have properties different from the continuous field.