Optimum watermark detection of ultrasonic echo medical images

To prevent unauthorized access to a person's medical images, it is widely acknowledged that the security features of confidentiality, availability and integrity should be in place. This paper proposes the watermarking of ultrasonic echo images together with optimal watermark detection, in which pseudorandom noise is added to the images for integrity. The optimum watermark detection is the integration of the generalized Gaussian distribution (ρ‐GGD) and the Cauchy distribution. The results show that the proposed method gives good detection performance. The proposed method not merely achieves optimum detection using the Rao test but also leads to the highest detection probability with JPEG2000 compression. Compared with other detection methods, our proposed method exhibits better watermark detection performance even when the watermark‐to‐document ratio (WDR) is −50 dB. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Electroelastic Response of Cylindrical Fiber with D∞ Symmetry Exposed to Local Electric Field Through Opposed Electrode Pair

To obtain practical information on the electroelastic behavior of poly-l-lactic acid microtweezers or catheters, a previously constructed analytical technique is used to obtain the electroelastic field solution of a poly-l-lactic acid cylindrical fiber exposed to a local electric field, which is applied through an opposed pair of square-sectioned electrodes. The numerical representation of the solution reveals the detailed field quantity distributions, their importance in the design of microtweezers and catheters, the overall deformation of such devices, and the effects of the electrode dimensions on the deformation.     

Regional forecasts of photovoltaic power generation according to different data availability scenarios: a study of four methods

The development of methods to forecast photovoltaic (PV) power generation regionally is of utmost importance to support the spread of such power systems in current power grids. The objective of this study is to propose and to evaluate methods to forecast regional PV power 1 day ahead of time and to compare their performances. Four forecast methods were regarded, of which two are new ones proposed in this study. Together, they characterize a set of forecast methods that can be applied in different scenarios regarding availability of data and infrastructure to make the forecasts. The forecast methods were based on the use of support vector regression and weather prediction data. Evaluations were performed for 1 year of hourly forecasts using data of 273 PV systems installed in two adjacent regions in Japan, Kanto, and Chubu. The results show the importance of selecting the proper forecast method regarding the region characteristics. For Chubu, the region with a variety of weather conditions, the forecast methods based on single systems' forecasts and the one based on stratified sampling provided the best results. In this case, the best annual normalized root mean square error (RMSE) and mean absolute error (MAE) were 0.25 and 0.15 kWh/kWh_avg, respectively. For Kanto, with homogeneous weather conditions, the four methods performed similarly. In this case, the lowest annual forecast errors were 0.33 kWh/kWh_avg for the normalized RMSE and 0.202 kWh/kWh_avg for the normalized MAE. Copyright © 2014 John Wiley & Sons, Ltd.     

Preparation of Yttria-Stabilized Zirconia Thin Films on Strontium-Doped LaMnO3 Cathode Substrates via Electrophoretic Deposition for Solid Oxide Fuel Cells

A yttria-stabilized zirconia (YSZ) thin film on an La_0.8Sr_0.2MnO₃ porous cathode substrate was prepared, using electrophoretic deposition (EPD) to fabricate a solid oxide fuel cell (SOFC). The electrical conductivity of an La_0.8Sr_0.2MnO₃ substrate is satisfactorily high at room temperature; therefore, YSZ powder could be deposited electrophoretically onto an La_0.8Sr_0.2MnO₃ substrate without any extra surface treatment, such as a metal coating. Successive repetition of EPD and sintering was required to obtain a film without gas leakage, because of the thermal expansion coefficient mismatch between the YSZ and the La_0.8Sr_0.2MnO₃ substrate. On the other hand, the electromotive force of the oxygen concentration in the cell that used YSZ film prepared via EPD increased and attained the theoretical value when the number of deposition and calcination cycles was increased. Six or more successive repetitions were required to obtain a YSZ film without gas leakage. A planar-type SOFC was fabricated, using nickel as the anode and YSZ film (∼10 μm thick) that had been deposited onto the La_0.8Sr_0.2MnO₃ substrate as the electrolyte and cathode. The cell exhibited an open circuit voltage of 1.0 V and a maximum power density of 1.5 W/cm². Thus, the EPD method could be used as a colloidal process to prepare YSZ thin-film electrolytes for SOFCs.     

Decomposition of CCl2F2 over metal sulfate catalysts

Activity for hydrolysis of CCl₂F₂ (CFC12) on various metal sulfate was investigated. Zr(SO₄)₂ was found to be the most active while FeSO₄, Cr₂(SO₄)₃, Al₂(SO₄)₃, La₂(SO₄)₃ and Ce₂(SO₄)₃ had intermediate activity. MnSO₄, CoSO₄, and MgSO₄ showed low activity and SrSO₄, CaSO₄, and BaSO₄ had even less activity. The major carbon containing product was CO₂ and small amount of CClF₃ and CO were formed over several sulfates. The crystal structure of the sulfates was stable during decomposition of CCl₂F₂, and the conversion reached a steady state after initial decrease at 275 °C over Zr(SO₄)₂ catalyst. The concentration of surface hydroxyl was larger than that over AlPO₄-based catalysts and a reaction mechanism similar to that over AlPO₄-based catalysts was proposed.     

Hydrogen production from methane using vanadium-based catalytic membrane reactors

The application of vanadium-based membranes as the hydrogen separation membrane for a catalytic membrane reactor system was investigated for the direct production of hydrogen from methane. The methane conversion and hydrogen production rates of the catalytic membrane reactor system with Pd-coated 100 μm-thick vanadium-based membranes were comparable with the reactor using 50 μm-thick Pd–Ag alloy membrane at all temperatures examined. The methane conversion rates of the catalytic membrane reactor with the Pd-coated vanadium-based membranes were approximately 35% and 62% at 623 K and 773 K, respectively. The hydrogen production rates were around 660  μmol min⁻¹ at 623 K, and reached over 1710  μmol min⁻¹ at 773 K. The relationship between the methane conversion rates and hydrogen permeation fluxes of the catalytic membrane reactor confirmed that the removal of hydrogen from the reaction site enhances the methane decomposition reaction. Further, the vanadium based membrane exhibited good stability against Fe in a hydrogen containing atmosphere.     

High-performance carbon counter electrode for dye-sensitized solar cells

Here, we reported that a new carbon electrode prepared with an activated carbon was superior to a Pt sputtered electrode as the counter electrode of dye-sensitized solar cells. The photovoltaic performance was largely influenced by the roughness factor of carbon electrode. The open-circuit voltage increased by about 60 mV using the carbon counter electrode compared to the Pt counter electrode because of positive shift of the formal potential for I₃⁻/I⁻ couple.     

Effects of phosphorus content on generation and growth of cracks in nickel–phosphorus platings owing to thermal cycling

We observed crack generation and structural changes in electroless nickel–phosphorus (Ni–P) plating layers formed on copper-metalized silicon nitride substrates both during thermal cycling from ? 40 to 250 °C and during storage (not cycling) at 250 °C in order to investigate the effect of the phosphorus contents on crack generation and growth in the Ni–P platings. The used platings contained phosphorus at three different contents: 2.1 wt% [Ni–P(low)], 6.5 wt% [Ni–P(med)], and 10.9 wt% [Ni–P(high)]. The generation time and the amount of cracks were strongly dependent on their phosphorus contents. More cracks appeared after thermal cycling than after storage at 250 °C. In Ni–P(low), cracks were generated after 200 thermal cycles, whereas no cracks were observed even after 250 h of storage at 250 °C. In Ni–P(med) and Ni–P(high), both during thermal cycling and storage at 250 °C, cracks formed during or after crystallization of the amorphous layers. These results suggest that the primary factors affecting the generation of cracks in electroless Ni–P platings are crystallization of the Ni–P platings and repeated changes in thermal stress.     

Design and performance evaluation of a haptic interface based on MR fluids for endovascular tele-surgery

Microsystem Technologies - In this paper, a magnetorheological (MR) fluids based haptic interface has been developed in master site to provide the haptic sensation to the interventionalist during...