H2O(g)对富氧燃烧超细颗粒物生成特性影响

为实现富氧燃烧技术的广泛推广,对煤粉燃烧在富氧气氛下的颗粒物排放特性进行了研究。在1800 K管式炉内进行煤焦燃烧试验,研究了富氧气氛下H₂O(g)体积分数(0、5%、10%、20%、30%)对煤焦燃烧超细颗粒物的影响;采用荷电低压撞击器(ELPI+)获得超细颗粒物质量和数量浓度粒径分布并进行分析。结果表明,H₂O(g)对超细颗粒物质量浓度和数量浓度粒径分布无影响,但会导致超细颗粒物的峰值波动。超细颗粒物总数量由最小粒径超细颗粒物决定,5种水蒸气浓度下EL?PI+第1级撞击器收集到的超细颗粒物数量占比均超过65%。超细颗粒物总质量由最大粒径超细颗粒物决定,5个水蒸气浓度下ELPI+第7级撞击器收集到的超细颗粒物质量占比均超过94%。低H₂O(g)浓度会抑制超细颗粒物生成,H₂O(g)体积分数为5%时的抑制作用最显著;高H₂O(g)浓度会促进超细颗粒物生成。这是因为一方面H₂O(g)与煤焦发生气化反应,使煤焦颗粒周围产生还原性气氛,促进矿物质还原为单质,进一步促进矿物质蒸发;另一方面气化反应是吸热反应,会降低煤焦颗粒燃烧温度,同时H₂O(g)加入也导致烟气热容增加进一步降低,煤焦燃烧温度抑制煤中矿物质的蒸发,导致超细颗粒物生成减少,是2种作用相互竞争的结果。此外,H₂O(g)的加入使超细颗粒物平均粒径增大,0~5%H₂O(g)时超细颗粒物平均粒径增大最迅速。     

Development of flexible organic light‐emitting diode on barrier film and roll‐to‐roll manufacturing

To come out with a successful organic light‐emitting diode (OLED) lighting business, it is very important to have clear differentiation of OLED from LEDs. Flexible OLED has merits, such as capability to be mounted on the curved wall, which is not easy for LEDs to achieve the feature. There are several approaches to make flexible OLEDs especially among those plastic barrier films that can bring high level of flexibility, which could not be achieved by any conventional lighting method. In this paper, barrier films with various water vapor transmission rate values, including 10^{? 6} order, are applied, and the conditions to have almost no dark spot growth under 85 °C and 85% high temperature/humidity test are shown. Flexible OLED panels are manufactured with the world's first roll‐to‐roll equipment using plastic barrier film.     

基于DNA遗传算法的CR多载波参数优化

提出了一种基于DNA计算的非支配排序多目标遗传算法(DNA-GA)来对CR多载波传输参数进行优化。该算法通过非支配排序计算个体适应度,结合克隆操作使算法收敛于全局最优,并引入DNA基因级操作,以提高算法的搜索性能,保持种群的多样性。通过在不同服务需求情况下得到的仿真参数结果,证明了DNA-GA可以有效地优化CR传输参数。     

ORBIT: A parallel computing model of Prolog

This paper proposes a parallel processing model of the Prolog language. The model modifies Or-parallelism by introducing the “process bundle” as a candidate for simultaneous execution. The Process bundle is a subset of backtrack points stacked in depth-first execution. The process bundle includes one or more backtrack points, so it provides a longer process life cycle than the Or-parallel process. A process bundle is dispatched when an idle processor requests a job from an executing processor. The executing processor dispatches a message containing the full environment by which the idle processor can execute the process without any communication with other processors.     

Highly accurate SNR measurement using the covariance of two SEM images with the identical view

Quality of an SEM image is strongly influenced by the extent of noise. As a well-known method in the field of SEM, the covariance is applied to measure the signal-to-noise ratio (SNR). This method has potential ability for highly accurate measurement of the SNR, which is hardly known until now. If the precautions discussed in this article are adopted, that method can demonstrate its real ability. These precautions are strongly related to "proper acquisition of two images with the identical view," "alignment of an aperture diaphragm," "reduction of charging phenomena," "elimination of particular noises," and "accurate focusing," As necessary, characteristics in SEM signal and noise are investigated from a few standpoints. When using the maximum performance of this measurement, SNR of many SEM images obtained in a variety of the SEM operating conditions and specimens can be measured accurately.     

山东省棉花主要病害的发生现状与防治

山东省棉花病害种类共有１９种，根据其发病部位和时期等特点习惯了分为四大类：苗期病害的发生枯黄萎病，铃部病害和叶部病害，其中危害性最大的是棉花枯萎病和黄萎病。某些年份，立枯病，黑斑病和铃疫病也能引起较大的损失。     

用人工智能中的搜索原理解决迷宫问题

迷宫问题是一个经典的程序设计问题,它要求用计算机编程的方法求解出从迷宫的入口到出口的所有路径。本文采用人工智能中的搜索原理,介绍了求解迷宫问题的基本思想以及实现方法。分析了用C语言编程的思路并给出了详细的程序设计语句,通过调试和运行总结出了一种极为简便、易于理解、易于编程的新方法。     

Leak-tightness characteristics concerning the containment structures of the HTTR

The containment structures of the HTTR consist of the reactor containment vessel, the service area, and the emergency air purification system, which minimise the release of fission products in postulated accidents, which lead to fission product release from the reactor facilities. The reactor containment vessel is designed to withstand the temperature and pressure transients and to be leak-tight in the case of a rupture of the primary concentric hot-gas duct, etc. The pressure inside the service area is maintained at a negative pressure by the emergency air purification system. The emergency air purification system will also remove airborne radioactivity and will maintain a correct pressure in the service area.The leak-tightness characteristics of the containment structures are described in this paper. The measured leakage rates of the reactor containment vessel were enough less than the specified leakage limit of 0.1%/d confirmed during the commissioning tests and annual inspections. The service area was kept in a way that the design pressure becomes well below its allowable limitation by the emergency air purification system, which filters efficiency of particle removal and iodine removal well over the limited values.The obtained data demonstrate that the reactor containment structures were fabricated to minimise the release of fission products in the postulated accidents with fission product release from the reactor facilities.     

Safety design

JAERI established the safety design philosophy of the HTTR based on that of current reactors such as LWR in Japan, considering inherent safety features of the HTTR. The strategy of defense in depth was implemented so that the safety engineering functions such as control of reactivity, removal of residual heat and confinement of fission products shall be well performed to ensure safety. However, unlike the LWR, the inherent design features of the high-temperature gas-cooled reactor (HTGR) enables the HTTR meet stringent regulatory criteria without much dependence on active safety systems. On the other hand, the safety in an accident typical to the HTGR such as the depressurization accident initiated by a primary pipe rupture shall be ensured. The safety design philosophy of the HTTR considers these unique features appropriately and is expected to be the basis for future Japanese HTGRs.This paper describes the safety design philosophy and safety evaluation procedure of the HTTR especially focusing on unique considerations to the HTTR. Also, experiences obtained from an HTTR safety review and R&D needs for establishing the safety philosophy for the future HTGRs are reported.     

Influence of variations in creep curve on creep behavior of a high-temperature structure

It is one of the key issues for a high-temperature structural design guideline to evaluate the influence of variations in creep curve on the creep behavior of a high-temperature structure. In the present paper, a comparative evaluation was made to clarify such influence.The evaluation results showed that, in almost all cases of a creep behavior pattern in which creep strain accumulated during a stress cycle caused significant relaxation of the corresponding deformation-controlled stress in the following cycles, the variations in creep behavior with the creep curve were qualitatively similar to those in fundamental creep properties. On the other hand, in many cases of another creep behavior pattern in which creep strain accumulated during a cycle doesn't cause the significant stress-relaxation in the following cycles, the variations in creep behavior for earlier cycles are different from those in fundamental creep properties. Even in these cases, however, those get qualitatively similar after several cycles when their stress-time histories are stabilized.Additional consideration was given to the influence of the relationship between creep rupture life and minimum creep rate, i.e., the Monkman-Grant's relationship, on the creep damage evaluation.The consideration suggested that the Monkman-Grant's relationship be taken into account in evaluating the creep damage behavior, especially the creep damage variations. However, it was clarified that the application of the creep damage evaluation rule of ASME B.&P.V. Code Case N-47 to the “standard case”which was predicted from the average creep property would predict the creep damage on the safe side.