Information geometry of turbo and low-density parity-check codes

Since the proposal of turbo codes in 1993, many studies have appeared on this simple and new type of codes which give a powerful and practical performance of error correction. Although experimental results strongly support the efficacy of turbo codes, further theoretical analysis is necessary, which is not straightforward. It is pointed out that the iterative decoding algorithm of turbo codes shares essentially similar ideas with low-density parity-check (LDPC) codes, with Pearl's belief propagation algorithm applied to a cyclic belief diagram, and with the Bethe approximation in statistical physics. Therefore, the analysis of the turbo decoding algorithm will reveal the mystery of those similar iterative methods. In this paper, we recapture and extend the geometrical framework initiated by Richardson to the information geometrical framework of dual affine connections, focusing on both of the turbo and LDPC decoding algorithms. The framework helps our intuitive understanding of the algorithms and opens a new prospect of further analysis. We reveal some properties of these codes in the proposed framework, including the stability and error analysis. Based on the error analysis, we finally propose a correction term for improving the approximation.     

Engineering of Lipid Nanoparticles by the Multifunctionalization of the Surface with Amino Acid Derivatives for the Neutralization of a Target Toxic Peptide

Protein affinity reagents (e.g., antibodies) are often used for basic research, diagnostics, separations, and disease therapy. Although a lot of “synthetic” protein affinity reagents have been developed as a cost-effective alternative to antibodies, their low biocompatibility is a considerable problem for clinical application. Lipid nanoparticles (LNP) represent a highly biocompatible drug delivery agent. However, little has been reported that LNP itself works as a protein affinity reagent in living animals. Here, LNP is engineered for binding to and neutralizing a target toxic peptide in living animals by multifunctionalization with amino acid derivatives. Multifunctionalized LNP (MF-LNP) is prepared using amino acid derivative-conjugated lipids. Optimized MF-LNP exhibits nanomolar affinity to the target toxic peptide and inhibits toxic peptide-dependent hemolysis and cytotoxicity. In addition, MF-LNP captures and neutralizes the toxic peptide after intravenous injection in the bloodstream; in addition, MF-LNP does not release the toxic peptide in the accumulated organ. These results reveal the potential of using LNP as a highly biocompatible protein affinity reagent such as an antidote.     

Introduction of local tensile strain on Ge substrates by SiGe stressors selectively grown on wet chemically recessed regions for strained Ge-nMOSFETs

Introduction of tensile strain into Ge substrates was demonstrated by forming embedded SiGe stressors on the recessed regions formed by an anisotropic wet chemical etching process for strained Ge-nMOSFETs having high electron mobility. A damage-free and well controlled anisotropic wet chemical etching process is developed in order to avoid plasma-induced damages in a conventional RIE process. The uni-axial tensile strain over 1% near the Ge recess-edge regions, which is induced by the embedded SiGe stressors, is also demonstrated for the first time. These results suggest that higher electron mobility than the upper-limit for a Si-MOSFET is obtainable in short channel strained Ge-nMOSFETs with the embedded SiGe stressors.     

Phase and magnetic properties of iron oxide clusters in 20CaO·20SiO2·7Fe2O3·6FeO glasses

The annealing of 20CaO·20SiO₂·7Fe₂O₃·6FeO glasses at 973K in vacuo produced clusters of iron oxide, the shape of which was nearly spherical and the diameter distributed in the narrow range 25–115Å. The phase of clusters was identified to be Fe³⁺(Fe³⁺ _{poststagger|1.30}Fe²⁺ _{poststagger|0.55}V_0.15)·O₄ in the inverse spinel structure based upon the Mössbauer spectra and x-ray diffraction profiles. The clusters exhibited superparamagnetism and their effective anisotropy energy constant was inversely proportional to the cluster diameter. The magnetization of the glasses measured by a vibrating sample magnetometer was 7.2 × 10^-6 Wbmkg^-1 at 10 kOe at room temperature and smaller than the value calculated assuming that the whole clusters have superparamagnetism. These results suggest the pinning of spins near the cluster surface.     

Ultra-thin high-density LSI packaging substrate for advanced CSPs and SiPs

An ultra-thin high-density LSI packaging substrate, called multi-layer thin substrate (MLTS), is described. It meets the demand for chip scale packages (CSPs) and systems in a package (SiPs) for use in recently developed small portable applications with multiple functions. A high-density build-up structure is fabricated on a Cu plate, which is then removed, leaving only an ultra-thin, high-density multi-layer substrate. MLTS has (1) excellent registration accuracy, which enables higher density and finer pitch patterning due to the use of a rigid, excellent-flatness Cu base plate; (2) a thinner multi-layer structure due to the use of a core-less multi-layer structure; (3) excellent reliability, supported by the use of an aramid-reinforced epoxy resin dielectric layer; and (4) a cost-effective design due to the use of fewer layers fabricated using a conventional build-up process. A prototype high-density CSP (0.4-mm pitch/288 pins/4 rows/10 mm²) was fabricated using a 90-μm-thick MLTS (with a solder resist layer). Testing demonstrated that it had excellent long-term reliability. A prototype ultra-thin, high-density SiP (0.5-mm pitch/225 pins/11 mm²/0.93 mm thick) was also fabricated based on MLTS. MLTS consists of only two conductor layers (total thickness: 90 μm) while an identical-function build-up printed wiring board needs four conductor layers (total thickness: 300 μm). With its thinner core-less multi-layer structure, MLTS enables the fabrication of ultra-thin, high-density SiPs.     

Residual stress evaluation in resin-molded IC chips using finite element analysis and piezoresistive gauges

The high residual stress in a resin-molded electronic package sometimes makes the electronic functions unstable. Therefore the residual stress in electronic packages, especially on the top surfaces of semiconductor chips, should be evaluated. The objective of this study is to present a simple method for evaluating residual stress in resin-molded semiconductor chips using a combination of experimental and numerical methods. The actual residual stress of the packaging process was measured by using test chips that included piezoresistive gauges. A linear thermoelastic finite element analysis was then carried out using a three-dimensional model. The finite element analysis was performed under a stress-free temperature determined by the temperature dependence of the residual stress, which was experimentally measured by using the piezoresistive test chips. The measured residual stress using the test chips agreed well with the results of the finite element analysis. It was therefore confirmed that the present evaluation method, combining experimental and numerical methods, is reliable and reasonable.     

On the method-independent lower bound (MILB) to the variance of attenuation estimation in random reflection

Based on the Cramer-Rao inequality, the MILB is calculated for the problem of estimating the frequency slope of the attenuation coefficient of tissue from random reflections of ultrasonic waves. Under typical signal conditions, this bound for a 1-cm x 1-cm region was found to be about 0.08 db/(MHz-cm), rather close to the clinical requirement of 0.1 dB/(MHz-cm). Comparison to existing methods (including an autoregressive deconvolution method) shows room for further improvement.     

Structural study of degraded ZnMgSSe blue light emitters

Using electroluminescence (EL) topography and transmission electron microscopy (TEM), we investigated the nonluminescent regions which form while current is being injected into ZnMgSSe/ZnSSe/ZnCdSe-based blue light emitters. Small dark spots were observed just after turn-on and spread out forming rough nonluminescent triangles in the <100> directions in the EL image of the active region. TEM studies showed that the small dark spots are pre-existing stacking faults originating at the substrate/epitaxial layer interface. The nonluminescent triangles were found to be a dense region of dislocation dipoles and dislocation loops. Each dipole was aligned along two <110> directions in the {111} planes. The Burgers vectors were of the type a/2<011> inclined at 45° to the (001) junction plane.     

Teleoperation via computer network

In a teleoperation system, providing force information to a human operator can improve task performance. When a communication block between a master and a slave has a transmission delay, the system is easily destabilized. Anderson and Spong guaranteed passivity in the communication block by using scattering transformation and overcame this instability caused by the time delay. But this method can be applied to the communication block with a constant time delay. In a traditional teleoperation system, its communication block has a constant time delay. But time delay irregularly changes in a computer network because many users share telecommunication lines. This paper shows that the variable time delay destabilizes bilateral master-slave manipulator with scattering transformation and a new compensation method which keeps the time delay constant. This new compensation method has been implemented in a single-axis master-slave manipulator.     

TDMA based adaptive modulation with dynamic channel assignment(AMDCA) for large capacity voice transmission in microcellular systems

The authors propose an adaptive modulation with dynamic channel assignment (AMDCA) to achieve high capacity voice transmission in microcellular systems. The proposed system measures the received carrier-to-noise plus interference power ratio (C/(N+I)) of each time division multiple access (TDMA) slot to search for available slots and to discover the optimum modulation parameters for each slot, thereby effectively combining the buffeting effect of spatially distributed electric field strength by slow adaptive modulation, and that of spatially and temporally distributed traffic by dynamic channel assignment (DCA). Computer simulation confirms that the proposed AMDCA system can achieve ~7.5 times higher system capacity than the conventional QPSR with a fixed channel assignment (FCA)