Effect of Gallia Addition on the Sintering Behavior of Samaria-Doped Ceria

Samaria-doped ceria (SDC) was prepared by using the solid-state reaction method. Sintering of SDC was significantly promoted by adding a small amount of gallium. SDC that had 1% of gallium added, sintered at 1450°C, showed almost the same properties as SDC sintered at 1600°C. Measurements showed that the addition of gallia could reduce the sintering temperature by 150°C without deteriorating the properties of SDC as an electrolyte for solid oxide fuel cells.     

Heat transfer of combined forced and natural convection from horizontal cylinder to air

Experimental investigations have been carried out for combined convective flows of air induced around uniformly heated, horizontal cylinders. Three cases of aiding, opposing, and cross flows were examined. The experiments covered the ranges of the Reynolds and modified Rayleigh numbers of Re_d=50 to 900 and Ra_d^*=5×10⁴ to 3×10⁶. The flow fields around the cylinders were visualized with smoke. The results showed that separation points gradually shift from those of the forced convection to the top edge of the cylinder with increasing wall heat fluxes. The local heat transfer coefficients of the cylinders were also measured. Although the local coefficients show complex variations with the forced flow velocities and the wall heat fluxes, the overall coefficients become higher than those estimated from pure forced and natural convections throughout the cases of aiding, opposing, and cross flows. Moreover, it was confirmed that the overall Nusselt numbers as well as the separation points can be predicted with the non‐dimensional parameter (Gr_d^*/Nu_dRe_d²). © 2007 Wiley Periodicals, Inc. Heat Trans Asian Res, 36(8): 474–488, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20180     

Simplified method for determining cadmium concentrations in rice foliage and soil by using a biosensor kit with immunochromatography

BACKGROUND: The behavior of cadmium in ecosystems needs to be monitored because of the human toxicity of this heavy metal. The need recently arose for a simple and quick on‐site test for trace levels of Cd in food and environmental samples. In response, an immunochromatographic assay kit for detecting Cd was manufactured by Kansai Electric Power Co. of Japan. This kit uses the antigen–antibody complex reaction between the Cd–EDTA complex and an anti‐Cd–EDTA antibody and shows the results in terms of the degree of color developed on a test paper. We previously reported the successful use of this kit to determine Cd concentrations in brown rice. Here, we applied the kit to the determination of Cd concentrations in rice foliage and soil. RESULTS: Cadmium in rice foliage was not extracted successfully by the method used for brown rice. However, it was successfully extracted by 0.1 mol L^?1 HCl solution at a rice foliage:HCl ratio of 1:20, and coexisting metals were removed sufficiently by the column treatment. The Cd concentrations determined by immunochromatographic assay were well correlated with the values obtained by acid decomposition and inductively coupled plasma mass spectrometry. The 0.1 mol L^?1 HCl‐extractable Cd concentration in soil was also determined successfully with the kit. CONCLUSION: Approximate Cd concentrations in rice plants and 0.1 mol L^?1 HCl‐extractable Cd concentrations in soil can be monitored easily and quickly by this method at locations where facilities for acid digestion and precision analysis are not available. Copyright © 2009 Society of Chemical Industry     

Preliminary Study of Single Phase Preparation and Doping Effect of <Emphasis Type="Italic">β</Emphasis>-Zn<Subscript>4</Subscript>Sb<Subscript>3</Subscript>

Single phase β-Zn₄Sb₃ was prepared by the application of a two-stage heat treatment, and impurity elements were doped. The undoped and doped samples were prepared by direct melting followed by two-stage heat treatment at 450°C and 400°C after solidification of the samples in sealed quartz ampoules. Impurity doping of the samples was performed by the addition of 1 at.% of Se, In, Pb, Te, or Bi. The resulting samples were characterized by x-ray diffraction (XRD), differential thermal analysis (DTA), optical microscopy, and electron probe microanalysis, and their Seebeck coefficients were determined at room temperature. The undoped samples were determined by XRD and DTA to comprise single phase β-Zn₄Sb₃, while the doped samples were composed of multiple phases. From the measurements of the Seebeck coefficient, all samples were found to be p-type and all were found to have almost the same values. These results indicate that β-Zn₄Sb₃ has limited solubility for these impurity elements.     

TEM/STEM Observation of ZrC Coating Layer for Advanced High-Temperature Gas-Cooled Reactor Fuel, Part II

The Japan Atomic Energy Agency (JAEA) has started to study and develop zirconium carbide (ZrC)-coated fuel particles for advanced high-temperature gas-cooled reactors. The ZrC coating layer has been fabricated at JAEA by chemical vapor deposition using a pyrolytic reaction of zirconium bromide. The microstructures of the ZrC layers, whose nominal deposition temperatures could be measured and controlled during the deposition process, were characterized by means of TEM and STEM. In the present study, three batches were prepared and compared with each other as well as the previous batches. The crystallographic orientation of ZrC with regard to the growth direction in the ZrC layers deposited at a constant temperature of 1630 K was different from that deposited at varying temperatures in the 1493–1823 K range. A thin layer of turbostratic carbon was observed at the boundary between pyrolytic carbon and ZrC in particles deposited at the highest temperature among those used in this study (the nominal temperature was 1769 K); no such structure was found in a batch deposited at a lower temperature (the nominal temperature was 1632 K). Therefore, precise control of temperature is shown to be critical to the formation of good ZrC coatings.     

Motional coherency in chain dynamics of polybutadiene studied by molecular dynamics simulations

Molecular dynamics simulations of 1,4-polybutadiene in bulk amorphous state were performed. Results were compared with the recent neutron spin-echo measurements. To investigate motional coherency the relaxation rates for the collective and self-motions, the collective and self-relaxation rates, were evaluated for the short and long time regimes of the normalized intermediate scattering functions. The scattering vector dependence of the collective relaxation rates estimated for both fast and slow processes indicated a minimum at scattering vector q = 1.5 Å⁻¹, corresponding to the position of a peak in the static structure factor. The self-relaxation rates increased monotonously with q. A phenomenon known as de Gennes narrowing was reproduced well in the simulation and found to be originated from the inter-molecular correlation. The collective relaxation rate evaluated for fast process appeared to modulate around a peak of q = 2.9 Å⁻¹, corresponding to the intra-molecular correlation.     

Characteristics of porous polymer composite columns prepared by radiation cast-polymerization

Porous polymer composite columns having porous structure were prepared by radiation cast-polymerization of hydrophilic monomers at low temperature and their characteristics were studied. The porosity of the polymer increased with decreasing monomer concentration. The elution time of water in the polymer column increased with increasing monomer concentration and with decreasing irradiation temperature. The elution time was dependent on the degree of hydration of the polymer. The polymer with a degree of hydration of 0.2 to 0.4 gave the minimum elution time. The elution time decreased with the addition of porous inorganic substances.     

Mie scattering from sphere structures in polymer blends

Polymer blends of transparent poly(methyl methacrylate) and polystyrene become opaque due to light scattering at the boundaries of the two polymers. The polymer blend is light brown when it is illuminated by white light. The coloring depends on the spherical domain structures existing in the polymer blend. The coloring was analyzed by using the rigorous Mie theory. The Mie results were compared with the semiempirical results previously reported by the authors. The wavelength dependence of theoretical scattering efficiencies on radii of scattering spheres from 0.05 to 1.2 μm was obtained for polystyrene spheres in poly(methyl methacrylate) matrix, and vice versa. The scattering at the short wavelength region is stronger than at the long wavelength region. The scattering efficiencies become almost constant in the visible wavelength region for sufficiently large spheres.     

Pose-Invariant Facial Expression Recognition Using Variable-Intensity Templates

In this paper, we propose a method for pose-invariant facial expression recognition from monocular video sequences. The advantage of our method is that, unlike existing methods, our method uses a simple model, called the variable-intensity template, for describing different facial expressions. This makes it possible to prepare a model for each person with very little time and effort. Variable-intensity templates describe how the intensities of multiple points, defined in the vicinity of facial parts, vary with different facial expressions. By using this model in the framework of a particle filter, our method is capable of estimating facial poses and expressions simultaneously. Experiments demonstrate the effectiveness of our method. A recognition rate of over 90% is achieved for all facial orientations, horizontal, vertical, and in-plane, in the range of ±40 degrees, ±20 degrees, and ±40 degrees from the frontal view, respectively. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users.