Leaching behavior of heat-treated waste ash

The leaching behavior of heat-treated waste ash was studied to verify the possibility of the thermal treatment of waste incineration ash in existing incinerators and boiler combustion chambers. The influence of temperature, oxygen concentration and treatment time on the leaching behaviors of harmful heavy metals, especially lead (Pb) and chromium(VI) (Cr (VI)) were studied to clarify effective treatment conditions to suppress leaching. By examining the leaching behavior of Pb and Cr from ash heat-treated under various conditions, it was found that leaching can be suppressed by heat-treating the ash under conventional combustion conditions of around 900-1000 °C at 5-10% oxygen concentration. The leaching behaviors of Pb and Cr (VI) from real ash with different particle sizes and from model samples were also investigated in detail to find an effective method to suppress Pb leaching. It was found that the formation and growth of gehlenite (SiO₂·2CaO·Al₂O₃) in the ashes led to the decrease in the amount of Pb leaching. Therefore it was considered that the addition of an inorganic matrix with a high silica content that can promote gehlenite growth in the ash, for example, coal ash or waste glass is effective to suppress of Pb leaching.     

Porous cellulose acetate membrane prepared by thermally induced phase separation

Microporous cellulose acetate membranes were prepared by a thermally induced phase separation (TIPS) process. Two kinds of cellulose acetate with acetyl content of 51 and 55 mol % and two kinds of diluents, such as 2‐methyl‐2,4‐pentandiol and 2‐ethyl‐1,3‐hexanediol, were used. In all polymer‐diluent systems, cloud points were observed, which indicated that liquid–liquid phase separation occurred during the TIPS process. The growth of droplets formed after the phase separation was followed using three cooling conditions. The obtained pore structure was isotropic, that is, the pore size did not vary across the membrane. In addition, no macrovoids were formed. These pore structures were in contrast with those usually obtained by the immersion precipitation method. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3951–3955, 2003     

Preparation and Characterization of Chitosan‐Gellan Hybrid Capsules Formed by Self‐Assembly at an Aqueous Solution Interface

Summary: True spherical capsules are formed by electrostatic polysaccharide interaction between chitosan and gellan gum via polyion complex (PIC) formation in aqueous solutions. Dropwise addition of a chitosan solution into the gellan solution gave spherical capsules whose outside surface was gellan and whose inside was chitosan (chitosanⁱⁿ‐gellan^out capsule). Conversely, the addition of gellan into chitosan yields chitosan^out‐gellanⁱⁿ capsules. SEM observation revealed a fibrous network spreading along the capsule membrane of the chitosanⁱⁿ‐gellan^out capsule. The releasing properties of the capsules were examined using low molecular weight substances and high molecular weight proteins. For low molecular weight substances, the releasing kinetics were affected by the attractive and repulsive interactions between the substances and the inside component of the capsule. The molecular weight of the encapsulated substances also affects the releasing kinetics. These results, together with a simple preparation procedure, indicate the applicability of chitosan‐gellan capsules as drug‐carrier materials having a controlling release mechanism. As an application example, preparation of an actually eatable artificial roe was also described.

Illustrative drawing of PIC capsule formation.     

Dehydrogenation of ethane to ethylene via radical pathways enhanced by alkali metal based catalyst in oxysteam condition

The dehydrogenation of ethane to ethylene in the presence of oxygen and water was conducted using Na₂WO₄/SiO₂ catalyst at high temperatures. At 923 K, the conversion rate without water was proportional to ethane pressure and a half order of oxygen pressure, consistent with a kinetically relevant step where an ethane molecule is activated with dissociated oxygen on the surface. When water was present, the ethane conversion rate was drastically enhanced. An additional term in the rate expression was proportional to a quarter of the oxygen pressure and a half order of the water pressure. This mechanism is consistent with the quasi‐equilibrated OH radical formation with subsequent ethane activation. The attainable yield can be accurately described by taking the water contribution into consideration. At high conversion levels at 1073 K, the C₂H₄ yield exceeded 60% in a single‐pass conversion. The C₂H₄ selectivity was almost insensitive to the C₂H₆ and O₂ pressures. © 2016 American Institute of Chemical Engineers AIChE J, 63: 105–110, 2017     

Aerosol-to-liquid collection: A method for making aqueous suspension of hydrophobic nanomaterial without adding dispersant

This article introduces an aerosol-based technique to make aqueous suspension of hydrophobic nanomaterial without adding dispersant. The method is intended for making a test-sample for evaluating the toxicities of nanomaterial by intra-tracheal administration. The method can wet the surface of hydrophobic nanomaterial within a few seconds. After the wetting process five to ten minutes of sonication assisted with manual stirring can fully disperse the hydrophobic nanomaterials in water. Two types of TiO₂ nanomaterial were used in this study; Tayca JMT-150IB whose surfaces are coated with negatively charged hydrophobic functional group, and P25 whose surfaces are naturally hydrophilic. Nanomaterials are aerosolized by a dry-method and become micrometer-sized agglomerates. Then supersaturated water vapor is condensed onto these airborne agglomerates by using a growth tube collector. The collected suspension (CS) of hydrophobic nanomaterial (JMT-150IB) is prepared in two steps; airborne agglomerates are collected onto a flat surface then transferred to liquid-water and subsequently sonicated for complete dispersion. This method works equally well for making the CS of hydrophilic nanomaterial. Size distribution measurements of the CS show that airborne agglomerates of TiO₂ dissociate into smaller units of agglomerates once they are captured into water, and the sizes of the agglomerates are in the nanometer to sub-micrometer range. Light scattering technique is used to show that a short sonication process can reproduce the particle number concentration of the CS after long storage.

Copyright © 2017 American Association for Aerosol Research     

Monitoring behaviour of catabolic genes and change of microbial community structures in seawater microcosms during aromatic compound degradation

The behaviour of microbial populations responsible for degradation of the aromatic compounds, phenol, benzoate, and salicylate, and changes of microbial community structures in seawater microcosms were analysed quantitatively and qualitatively using MPN–PCR and PCR–DGGE. The purpose of the study was to investigate the ecology of the entire microbial community during bioremediation. Bacterial populations possessing catechol 1,2-dioxygenase (C12O) DNA were evidently the primary degraders of phenol and benzoate, but others possessing catechol 2,3-dioxygenase (C23O) DNA increased to enhance substrate degradation under high-load conditions when the substrates were present for long periods. However, salicylate degradation was evidently facilitated by specific bacterial populations possessing C23O DNA. PCR–DGGE analyses suggested that bacterial populations already relatively dominant in the original microcosm contributed to phenol degradation. Bacteria composing a minor fraction of the original population apparently increased and contributed to benzoate degradation. Bacterial populations possessing C23O DNA were responsible for salicylate degradation, however, and different degrading bacteria were evidently selected for, depending on the initial salicylate concentration. Microbial community structure tended to be simplified by aromatic compound degradation. Thus, microbial monitoring can elucidate the behaviour of bacterial populations responsible for aromatic compound degradation and be used to assess the effects of bioremediation on intact microbial ecosystems.     

等静压条件下粉体致密化过程一般规律的探讨

从粉体中孔隙度的变化出发,研究了粉体的受压致密化过程,发现了等静压条件下粉体致密化过程的一般规律和描述这一规律的一般方程.该方程简洁地表述了等静压力与密度的关系,仅包含2个特征常数;对于特定粉体,这2个常数唯一可求;代入这2个常数后,一般方程就成为描述该特定粉体受压致密化过程的特征方程;该方程得到了众多实验结果的良好验证.     

Distance measurement between Tyr10 and Met35 in amyloid beta by site-directed spin-labeling ESR spectroscopy: implications for the stronger neurotoxicity of Abeta42 than Abeta40

The neurotoxicity of the 42-mer and 40-mer amyloid beta peptides (Abeta42 and Abeta40) is closely related to the radicalization at both Tyr10 and Met35. Abeta42 is more neurotoxic than Abeta40. Our previous structural analyses of Abeta42 suggested that Tyr10 and Met35 are brought closer together by the turn at positions 22 and 23, and the S-oxidized radical cation at position 35, which is the ultimate toxic radical species, can be produced effectively through oxidation by the phenoxy radical at position 10. To verify this idea, their separation was measured by site-directed spin labeling (MTSSL) by using ESR spectroscopy. Among the three kinds of Abeta42 derivatives, which are doubly or singly spin-labeled at position 10 and 35, only 10,35-MTSSL-Abeta42 showed a clear dipole coupling in continuous-wave ESR; this suggests that the intramolecular spin labels at position 10 and 35 in Abeta42 are located within approximately 15 A. In contrast, 10,35-MTSSL-Abeta40 did not give such signals. The distance between Tyr10 and Met35 in 10,35-MTSSL-Abeta40, which was successfully measured by pulsed ESR spectroscopy was 30 A long. The difference in the distance between Abeta42 and Abeta40 could explain in part the stronger neurotoxicity of Abeta42 compared to Abeta40.     

Four-point probe resistance measurements using PtIr-coated carbon nanotube tips

We performed four-terminal conductivity measurements on a CoSi2 nanowire (NW) at room temperature by using PtIr-coated carbon nanotube (CNT) tips in a four-tip scanning tunneling microscope. The physical stability and high aspect ratio of the CNT tips made it possible to reduce the probe spacing down to ca. 30 nm. The probe-spacing dependence of resistance showed diffusive transport even at 30 nm and no current leakage to the Si substrate.