Bovine serum albumin-sugar conjugates through the maillard reaction: effects on interfacial behavior and emulsifying ability

Bovine serum albumin (BSA) was employed as a model protein emulsifier to conjugate with aldohexose (D-glucose (Glc) or D-allose (All)) and sugar fatty acid ester (6-O-octanoyl-D-glucose (GlcC8)) through the Maillard reaction. It was found during the reaction that rate of decrease of free amino groups in BSA was almost the same for the BSA-sugar mixtures whereas browning and protein aggregation developed in the following order: Glc < All < GlcC8. It was thought that the rate of degradation of the Amadori compound could have been influenced by the OH-group stereochemistry at the C3 position of aldohexose, while denaturation of BSA by GlcC8 enhanced the browning and protein aggregation. To understand the emulsifying ability of the BSA-sugar conjugates, hexadecane-water interfacial tension and the oil droplet size of emulsions prepared by homogenizing hexadecane and aqueous solution of the conjugates were examined. BSA-GlcC8 showed greater improvement in interfacial and emulsifying activity than did BSA-Glc and -All. However, no improvement in emulsion stability was observed for any of the BSA-sugar conjugates, suggesting the weakness of the film formed at the oil droplet interface.     

The effect of electro-degradation processing on microstructure of polyaniline/single-wall carbon nanotube composite films

Mesostructured polyaniline/single-wall carbon nanotube (PAni/SWCNT) composite film has been prepared through electrochemical polymerization/degradation processing. The microstructures of the films are observed before and after electro-degradation. Initial twisty SWCNT bundles are broken down and linked by the polymerization of PAni. Both crystalline and disordered PAni regions coexist in the PAni/SWCNT composite nanowires. The disordered regions are gradually dissolved while the crystalline regions are basically preserved after electro-degradation. The formation mechanism of the composite with special construction has been proposed. In addition, cyclic voltammetry measurements demonstrate that the electroactive performance of PAni/SWCNT composite is enhanced after electro-degradation. It is found that the specific capacitance of electro-degraded composite reaches up to 848.7 F/g, more than twice over the untreated film, which is ascribed to its profitable charge accessible interface and increased available crystalline PAni regions.     

Transport-Coefficient Dependence of Current-Induced Cooling Effect in a Two-Dimensional Electron Gas

The dependence of the current-induced cooling effect on the electron mobility??? _e is explored for a two-dimensional electron gas (2DEG) subjected to a perpendicular magnetic field. We calculate the distributions of the electrochemical potentials and the temperatures under a magnetic field, fully taking account of thermoelectric and thermomagnetic phenomena. Whereas the electrochemical potential and the electric current remain qualitatively unchanged, the temperature distribution exhibits drastic mobility dependence. The lower-mobility system has cold and hot areas at opposite corners, which results from the heat current brought about by the Ettingshausen effect in the vicinity of the adiabatic boundaries. The cooling effect is intensified by an increase in??? _e. Intriguingly, the cold and hot areas change places with each other as the mobility??? _e is further increased. This is because the heating current on the adiabatic edges due to the Righi?CLeduc effect exceeds that due to the Ettingshausen effect in the opposite direction.     

Trigger Detection Using Geographical Relation Graph for Social Context Awareness

The concept of context awareness is believed to be a key enabler for the new ubiquitous network service paradigm brought by cloud computing platforms and smartphone OSs. In particular, autonomous context-based service customization is becoming an essential tool in this context because users cannot be expected to pick step by step the appropriate network services by manually and explicitly matching preferences for their current context. In this work, we hence focus on the core problem of how to detect changes of context for network services. In turn, detection of such changes can trigger timely system reconfigurations. We introduce a trigger detection mechanism based on a mixed graph-based representation model able to encode geographical and social relationships among people and social objects like stores, restaurants, and event spots. Our mechanism generates a trigger when a significant change in the graph takes place, and it is able to render significant changes in a geographical relationship that holds among objects socially connected with each other. The main benefits of our method are that (1) it does not require building reference models in advance, and (2) it can deal with different kinds of social objects uniformly once the graph is defined. A computer simulation scenario provides evidence on the expected performance of our method.     

Ultra high-efficiency multi-photon emission blue phosphorescent OLEDs with external quantum efficiency exceeding 40%

We developed high-efficiency multi-photon emission (MPE) blue phosphorescent OLEDs with external quantum efficiency exceeding 40% at 100 cd m⁻². In these MPE devices, we used a blue phosphorescent emitter, FIrpic and pyridine-containing electron-transporters, B3PyPB and B3PyMPM, B4PyMPM. We also used a well-known electron-transporter, BCP for comparison. We used a combination of TAPC/MoO₃/Al/Liq layers as the charge-generation layer unit. An optimized MPE device showed an extremely high current efficiency of over 90 cd A⁻¹ and a high power efficiency of over 40 lm W⁻¹ at 100 cd m⁻² without any outcoupling enhancement.     

Inter-laboratory validation studies of biological method for determination of streptomycin in royal jelly

Inter-laboratory validation studies were conducted in 6 laboratories to validate the biological method for determination of streptomycin in royal jelly. Streptomycin spiked at the level of 0.2 and 1.0 ppm was analyzed. Mean recoveries were 89 and 96%, reproducibility relative standard deviations (RSD(R)) were 15.0 and 14.0%, HORRAT(R) values were 0.7 and 0.9. Samples containing residues at the levels of 0.25 and 0.80 ppm were analyzed. Mean recoveries were 113 and 99%, RSD(R) were 15.0 and 10.4%, and HORRAT(R) values were 0.8 and 0.6. The determination limit was 0.1 ppm. These results show that this method has good performance.     

Pre-treatment of sperm reduces success of ICSI in the pig

In pigs, although ICSI is a feasible fertilization technique, its efficiency is low. In general, injected pig sperm are insufficient to induce oocyte activation and embryonic development. Pretreatments for disrupting sperm membranes have been applied to improve the fertility of ICSI oocytes; however, we hypothesize that such pretreatment(s) may reduce the ability of the sperm to induce oocyte activation. We first evaluated the effects of sperm pretreatments (sonication (SO) to isolate the sperm heads from the tails, Triton X-100 (TX), and three cycles of repeated freezing/thawing (3×-FT) for disrupting sperm membranes) on the rate of pronucleus (PN) formation after ICSI. We found that oocytes injected with control (whole) sperm had higher rates of PN formation than those obtained after subjecting the sperm to SO, TX, and 3×-FT. The amounts of phospholipase Cζ (PLCζ), which is thought to be the oocyte-activating factor in mammalian sperm, in sperm treated by each method was significantly lower than that in whole untreated sperm. Furthermore, using immunofluorescence, it was found that in pig sperm, PLCζ was localized to both the post-acrosomal region and the tail area. Thus we demonstrated for the first time that sperm pretreatment leads to a reduction of oocyte-activating capacity. Our data also show that in addition to its expected localization to the sperm head, PLCζ is also localized in the tail of pig sperm, thus raising the possibility that injection of whole sperm may be required to attain successful activation in pigs.     

Interpreting the effects of image manipulation on picture perception in pigeons (Columba livia) and humans (Homo sapiens).

The effects of picture manipulations on humans' and pigeons' performance were examined in a go/no-go discrimination of two perceptually similar categories, cat and dog faces. Four types of manipulation were used to modify the images. Mosaicization and scrambling were used to produce degraded versions of the training stimuli, while morphing and cell exchange were used to manipulate the relative contribution of positive and negative training stimuli to test stimuli. Mosaicization mainly removes information at high spatial frequencies, whereas scrambling removes information at low spatial frequencies to a greater degree. Morphing leads to complex transformations of the stimuli that are not concentrated at any particular spatial frequency band. Cell exchange preserves high spatial frequency details, but sometimes moves them into the “wrong” stimulus. The four manipulations also introduce high-frequency noise to differing degrees. Responses to test stimuli indicated that high and low spatial frequency information were both sufficient but not necessary to maintain discrimination performance in both species, but there were also species differences in relative sensitivity to higher and lower spatial frequency information. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Fabrication of colorless organic materials exhibiting white luminescence using normal and excited-state intramolecular proton transfer processes

Organic, white luminescent materials were fabricated using a mixture of proton-transfer and nonproton-transfer fluorophores. 2'-Methoxy and 2'-hydroxy derivatives of 2-phenylimidazo[1,2-a]pyridine (PIP) have similar UV-absorption properties; however, they exhibit mechanistically different luminescence respectively ascribable to the normal (～420 nm) and excited-state intramolecular proton transfer processes (～530 nm) in the solid state. UV-irradiation of mixed solids excites both components concurrently and results in efficient white luminescence composed of two independent emissions without involving energy transfer process. White luminescent solids are easily transformed into vapor-deposited films under mild conditions, and a colorless and transparent thin film by dissolving in PMMA.     

Development of sample holder for in situ neutron measurement of hydrogen absorbing alloy

We developed a sample holder for in situ measurement of hydrogen absorbing alloy. In order to prevent the hydrogen absorption by vanadium, copper is coated with 2 μm thickness on inner surface of the vanadium holder. The effect of copper coating and the performance of the holder were evaluated by neutron diffraction and PDF profiles. The lattice parameters a and c of La₂Ni₇ with Ce₂Ni₇-type structure were refined as 0.505921(4) and 2.468608(4) nm by Rietveld analysis. The Cu-Cu correlation peak around r = 0.255 nm was not observed in the PDF profile. Thus the holder is useful for in situ measurement of hydrogen absorbing alloy. The diffraction and PDF profiles of La₂Ni₇D_x (0 < x < 10.5) were collected using a deuterium pressure of 3.7 MPa, and the changes of crystal and local structures were clearly observed.