A concentrator module of spherical Si solar cell

Spherical Si solar cell, which is made up of Si spheres with a diameter of approximately 1.0 mm, is expected to be a promising candidate for low consumption of Si feedstock and simple process technology. This paper describes the formation process and the structure of a concentrator module in detail. The concentrator lens was formed by casting with ultraviolet light hardening resin. The concentration ratio was 4.4 times and the pitch between the spheres was 2.0 mm. By this module design, it was possible to realize a consumption of the Si feedstock of about 3.0 g/W. Conversion efficiencies of 11.3% from single-sphere cell, 8.5% from a 23-spheres module and 5.2% from a 105-spheres module under AM1.5, 100 mW/cm² illumination were achieved.     

Study on the fabrication of a SU-8 cantilever vertically-allocated in a closed fluidic microchannel

Microsystem Technologies - This paper describes the fabrication of a vertically-allocated SU-8 cantilever in a closed fluidic channel. The difficulties to fabricate the vertically-allocated SU-8...     

JSFR key technology evaluation on fuel handling system

A simplified fuel handling system design for the demonstration Japan sodium-cooled fast reactor (JSFR) has been proposed. Fast Reactor Cycle Technology Development project phase I results of key technology evaluations on a pantograph fuel handling machine (FHM), a fuel transfer pot with two core component positions, dry spent fuel cleaning and minor actinide-bearing fresh fuel shipping cask are summarized. A full-scale FHM mockup has been fabricated and tested in the air accumulating performance and seismic tolerance data. A mockup fuel transfer pot with fins and chromium carbide coating has been fabricated and tested with sodium accumulating heat transfer performance data. Several sodium cleaning tests using a dummy subassembly has been conducted accumulating cleaning performance data. For fresh fuel shipping cask, a design tool for evaluation of heat transfer capability has been developed and a helium gas cask shows cooling capability of minor actinide-bearing fresh fuel. Those experimental and analytical efforts have shown that key technologies to develop simplified fuel handling system are matured enough to proceed large-scale sodium experiments and conceptual design study for the demonstration JSFR.     

Effect of expander shape on cooling characteristics by using a model pulse tube refrigerator

Pulse tube refrigerators do not have moving parts in the cold section, and they have low vibration, high reliability, and long life. The expander in refrigerators typically has an inverted U or coaxial shape because this attains a wider absorber area, lower height, and compactness. However, the performance of a Stirling-type pulse tube refrigerator is inferior to that of a Stirling refrigerator. Cooling characteristics of the pulse tube refrigerator greatly depend on the shape of the expander. In this study, an inertance-type refrigerator, which uses ambient air for the working gas, was developed to examine the effect of expander shape. This refrigerator model with changeable expander operated with a Stirling cycle, and it was composed of a reciprocating compressor, after-cooler, regenerator, absorber, pulse tube, hot-end, and inertance tube with reservoir. The following expander shapes were tested: in-line, L shape, L-L shape, and coaxial shape. The effect of expander shape on cooling capacity was examined experimentally and numerically using the model pulse tube refrigerator. The results of experiments showed that the L shape expander had the highest performance and the coaxial expander had the lowest performance. In addition, the characteristics of the gas flow in each expander were confirmed by fluid dynamics analysis.     

Open dumping site in Asian developing countries: a potential source of polychlorinated dibenz-p-dioxins and polychlorinated dibenzofurans

Open landfill dumping areas for municipal wastes in Asian developing countries have recently received particular attention with regard to environmental pollution problems. Because of the uncontrolled burning of solid wastes, elevated contamination by various toxic chemicals including dioxins and related compounds in these dumping sites has been anticipated. In this study, concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and coplanar polychlorinated biphenyls (PCBs) were determined in soils from dumping sites in the Philippines, Cambodia, India, and Vietnam. Residue concentrations of PCDD/Fs and coplanar PCBs in dumping site soils were apparently greater than those in soils collected in agricultural or urban areas far from dumping sites, suggesting that dumping sites are potential sources of PCDD/Fs and related compounds. Observed PCDD/F concentrations in soils from dumping sites in the Philippines and Cambodia were comparable or higher than those reported for dioxin-contaminated locations in the world (e.g., near the municipal waste incinerators and open landfill dumping sites). Homologue profiles of PCDD/Fs in dumping site soils from the Philippines and, to a lesser extent, from Cambodia and India reflected patterns of samples representing typical emissions, while profiles of agricultural or urban soils were similar to those of typical environmental sinks. This result suggests recent formation of PCDD/Fs in dumping site areas and that open dumping sites are a potential source of dioxins in Asian developing countries. Uncontrolled combustions of solid wastes by waste pickers, generation of methane gas, and low-temperature burning can be major factors for the formation of dioxins in dumping sites. Elevated fluxes of PCDD/Fs to soils in dumping sites were encountered in the Philippines, Cambodia, India, and Vietnam-Hanoi, and these levels were higher than those reported for other countries. Considerable loading rates of PCDD/Fs in the dumping sites of these countries were observed, ranging from 20 to 3900 mg/yr (0.12-35 mg TEQ/yr). PCDD/F concentrations in some soil samples from the Philippines, Cambodia, India, and Vietnam-Hanoi exceeded environmental guideline values, suggesting potential health effects on humans and wildlife living near these dumping sites. The estimated intakes of dioxins via soil ingestion and dermal exposure for children were higher than those for adults, suggesting greater risk of dioxin exposure for children in dumping sites. To our knowledge, this is the first comprehensive study on PCDD/Fs contamination in open dumping sites of Asian developing countries. On the basis of the result of this study, we have addressed a new environmental issue that open dumping sites are potential sources of PCDD/Fs and related compounds, and dioxin contamination in dumping sites may become a key environmental problem in developing countries.     

Transient phase conjunction in a two-level system

An analytical expression for conjugate signals is developed for a case where three rectangular pulses with the same center frequency are injected into a two-level system. The Maxwell's equation is solved with the slowly varying envelope approximation and with the perturbative third-order nonlinear polarization expression of a two-level system. Numerical examples are discussed in such a way that the input pulsewidth is changed relative to the energy relaxation and dephasing times. As the optical pulsewidth becomes short, ripples appear in the signal pulse due to the beat between the optical field and the resonant oscillation of the atomic system     

Simultaneous determination of quinolones in foods by LC/MS/MS

A simple method was developed for the simultaneous determination of seven quinolones (enoxacin, ofloxacin, ciprofloxacin, danofloxacin, lomefloxacin, enrofloxacin and sarafloxacin) in foods using liquid chromatography coupled with electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS). The seven quinolones were extracted with acetonitrile containing 0.2% formic acid, and the extracted solution was cleaned up on a C18 cartridge. The extract was diluted with 5 mmol/L IPCC-MS3 for injection into the LC-ESI-MS/MS. The LC separation was carried out on an ODS column with gradient elution of 5 mmol/L IPCC-MS3-acetonitrile as the mobile phase. Mass spectral acquisition was done in the positive ion mode by applying selected reaction monitoring (SRM). The recoveries of the seven quinolones were mostly greater than 60% from foods fortified at 10 ng/g. The detection limits in foods were 2 ng/g for enoxacin and ciprofloxacin, and 1 ng/g for the other drugs. Twenty cattle muscle, 7 swine muscle, 9 chicken muscle, 16 milk, 19 prawn and 20 broiled eel samples from retail markets were analyzed by this method. Enrofloxacin and its metabolite ciprofloxacin were detected in 9 broiled eel at the level of trace (tr)-34 ng/g and tr-10 ng/g, respectively.