A 250-Mb/s/pin, 1-Gb double-data-rate SDRAM with a bidirectionaldelay and an interbank shared redundancy scheme

This paper describes three circuit technologies indispensable for high-bandwidth multibank DRAM's. (1) A clock generator based on a bidirectional delay (BDD) eliminates the output skew. The BDD measures the cycle time as the quantity charged or discharged of an analog quantity, and replicates it in the next cycle. This achieves a 0.18-mm ², two-cycle-lock clock generator operating from 25 to 167 MHz with a 30-ps resolution. (2) A quad-coupled receiver eliminates the internal skew caused by the difference between a rise input and a fall input by 40%. (3) An interbank shared redundancy scheme (ISR) with a variable unit redundancy (VUR) efficiently increases yield in multibank DRAM's. The ISR allows redundancy match circuits to be shared with two or more banks. The VUR allows the number of units replaced to be variable. These circuit technologies achieved a 250-Mb/s/pin, 8-bank, 1-Gb double-data-rate synchronous DRAM     

Enhancement of thermostability of kojibiose phosphorylase from Thermoanaerobacter brockii ATCC35047 by random mutagenesis

Random mutation by error-prone PCR was introduced into kojibiose phosphorylase from Thermoanaerobacter brockii ATCC35047. One thermostable mutant enzyme, D513N, was isolated. The D513N mutant enzyme showed an optimum temperature of 67.5-70 degrees C (the wild type, 65 degrees C), and thermostability up to 67.5 degrees C (the wild type, up to 60 degrees C). The half-lives of D513N were estimated to be 135 h at 60 degrees C, 110 min at 70 degrees C and 6 min at 75 degrees C, respectively. They were about 1.6-fold, 7-fold and 6-fold longer than those of the wild-type enzyme, respectively.     

Production and properties of phytase and acid phosphatase from a sake koji mold, Aspergillus oryzae

We identified three types of acid phosphatase (ACP-I, ACP-II, and ACP-III) produced by Aspergillus oryzae in a submerged culture using only phytic acid as the phosphorous substrate. The optimum pH for the activities of the three enzymes was in the range of 4.5 to 5.5. Analysis of the substrate specificities of these enzymes revealed that ACP-I and ACP-III were acid phosphatases, and ACP-II was a phytase. These enzymes were produced during different periods of mycelial growth: ACP-II was produced during the early phase of cultivation (around 24 h), and ACP-I was produced between 24 to 72 h. ACP-III was detected after the production of ACP-I and ACP-II had ceased. The release of phosphate from phytic acid was expected to be due to the cooperative hydrolysis of these enzymes.     

Syntheses of alpha-arbutin-alpha-glycosides and their inhibitory effects on human tyrosinase

Alpha-arbutin is a tyrosinase inhibitor. We synthesized alpha-arbutin-alpha-glycosides by the transglycosylation reaction of cyclomaltodextrin glucanotransferase from Bacillus macerans using alpha-arbutin and starch as acceptor and donor molecules, respectively. We isolated and characterized two major products from the reaction mixture. The structural analyses using 13C- and 1H-NMR spectroscopy proved that they were 4-hydroxyphenyl alpha-maltoside (alpha-Ab-alpha-G1) and 4-hydroxyphenyl alpha-maltotrioside (alpha-Ab-alpha-G2). Both alpha-Ab-alpha-G1 and alpha-Ab-alpha-G2 exhibited competitive-type inhibition on human tyrosinase as alpha-arbutin does. Their K(i) values were calculated to be 0.6 mM and 2.8 mM, respectively, which is slightly and significantly higher than that of alpha-arbutin (0.2 mM).     

Fischer–Tropsch synthesis in slurry-phase reactors over Mn- and Zr-modified Co/SiO2 catalysts

Fischer–Tropsch (F–T) synthesis was carried out in a gas-flowed slurry-phase reaction system over Mn- and Zr-modified Co/SiO₂ catalysts. A 0.5 L stirred tank slurry reactor (STSR) was used for catalyst screening and a 12.5 L slurry bubble column reactor (SBCR) was used for trial pilot operation. While using the 0.5 L reactor for catalyst screening, Co supported on the SiO₂ with an average pore size of 10 nm showed a high catalytic performance for the F–T synthesis due to the suitable Co particle size in the catalyst. Zr promoter improved the activity and Mn promoter improved the stability of Co/SiO₂ catalyst for the F–T synthesis. H₂-TPR profiles indicated that Zr and Mn promoters improved the reduction degree of Co₃O₄ particles (on SiO₂ surface) to Co⁰ active species in H₂ flow at low temperature. While using the 12.5 L reactor for trial pilot operation over Mn–Zr–Co/SiO₂ catalyst, the space-time yield (STY) of C₅₊ hydrocarbons (liquid fuel) showed almost the same values when various solvents (n-C₁₆H₃₄, n-C₁₄H₃₀, diesel from petrol station, F–T crude oil) were used. Diesel and F–T crude oil are suitable for using in a large-scaled F–T synthesis plant owing to the low prices. Mn–Zr–Co/SiO₂ catalyst achieved a STY of C₅₊ hydrocarbons larger than 1000 g-C₅₊ kg-cat^? 1 h^? 1 in the 12.5 L reactor. The production capacity of liquid fuel from the 12.5 L reactor reached to 15.6 L per day (assumed for 24 h continuous operation). The stirring was very important for the F–T synthesis both reaction in the 0.5 L reactor and reaction in the 12.5 L reactor. The shape of slurry reactor also influenced the CO conversion for the F–T synthesis: reaction in the 12.5 L SBCR gave a higher CO conversion than that of reaction in the 0.5 L STSR (at the same W/F value under the same stirring speed) because the slender column reactor (SBCR) extended the residue time of reaction gas in the slurry-phase containing catalyst.     

Hand-eye system with three-dimensional vision and microgripper for handling flexible wire

A three-dimensional hand-eye system has been specially developed for handling, forming, and inserting flexible wires in electronic assemblies. The system consists of a vision system capable of measuring three-dimensional positions and a gripper capable of microforce control. The hand-eye system performs its tasks based on visual and force sensor data.The vision system uses a camera, a multiplanar laser light projector, and a video-rate image processor to measure the three-dimensional position of a flexible wire on a complex background. The projector consists of multiplanar light beams and a single-planar light beam and is robot-mountable. The single-planar light is used to simplify the matching of the multiplanar light beams and projection images. This is one of the most important features of our method. The measurement time is within 1.2 s for 20 positions on the wire, which is less than one robot cycle. The measurement accuracy is better than 0.2 mm in the plane for a 100×100 mm scene and is better than 1 mm perpendicular to the plane for a depth of 500 mm.The microgripper has 3-axis sensors capable of detecting three types of forces: grasping, pulling, and pushing. The dynamic range of the grasping force is 0.005 to 0.6 N, enabling high-resolution control. Two piezoelectric actuators are used in the microgripper fingers and a 3-mm stroke is achieved by amplifying the actuator's displacement using a two-stage lever.This system has been used for wire handling in magnetic disk slider manufacture, which is a difficult and delicate task. Measurement, grasping, and upper-stage insertion had a 100 percent success rate using autorecovery, making the hand-eye system feasible. This paper discusses design concepts, the range measurement principle, the system itself, and wire-handling applications.     

Heavy oxynitridation technology for forming highly reliable flash-type EEPROM tunnel oxide films

For the first time, it is demonstrated that in flash-type EEPROMs, the endurance properties are dramatically improved by heavy oxynitridation (RTONO) of the tunnel oxide. The layer composition evaluated by SIMS measurement indicates that large amounts of N atoms (>10/sup 20/ atom/cm/sup 3/) pile up at the SiO/sub 2/-Si interface, and are distributed in the bulk SiO/sub 2/. In addition, the RTONO film reduces the number of hydrogen atoms, which are the origin of electron traps. This oxynitridation causes a decrease of both electron and hole traps in the tunnel oxide, resulting in an improvement of the threshold voltage narrowing.<>     

Giant calcifying epithelioma of Malherbe (pilomatrixoma): imaging features

We present a case of giant calcifying epithelioma of Malherbe (pilomatrixoma) in the right upper arm of a 62-year-old man. It measured 18 x 12 x 8 cm in size, making it the largest of all the cases reported previously. CT clearly demonstrated a well-defined, subcutaneous mass with amorphous calcifications. The mass showed intermediate signal intensity on T2*-weighted MR images and slight contrast uptake on contrast-enhanced MR images. Histopathologically, this tumor showed no aggressive or malignant nature. The patient is without evidence of recurrence or metastasis 3 years following the resection.     

Photoluminescence of nitrogen-doped anatase

Photoluminescence depending on nitrogen concentration was investigated using anatase-type TiO₂ prepared by the calcination of a mixture of titanyl sulfate hydrate and urea. The substitutional ratio (x) of nitrogen in TiO₂ was successfully varied from 0.004 to 0.022 by changing the molar ratio of the mixture. The absorbance at 380–560 nm due to the formation of mid-gap states was proportional to the substitutional ratio of nitrogen controlled by the preparation conditions. In contrast, the fluorescent intensity at 382 nm originating from the band-to-band transition monotonically decreased with an increase in the substitutional ratio with an expansion of the anatase lattice. On the other hand, the maximum intensity of photoluminescence at 560 nm excited at 350 nm, which could be associated with the transition from the conduction band to the mid-gap states, was observed at x = 0.01. The optimal substitutional ratio for the emission was almost agreed with that for the photocatalytic decomposition of methylene blue and acetaldehyde under visible-light illumination. The photoluminescence was fundamentally determined by the balance between photoexcitation originating from a sufficient number of mid-gap states and deactivation of excited electrons and holes due to lattice distortion or defective states induced with the nitrogen doping.