Influence of Substrate Temperature on Physical Structure of AlN Thin Films Prepared on Polycrystalline MoSi2 by rf Magnetron Sputtering

c-axis-oriented aluminum nitride thin films were prepared on polycrystalline molybdenum disilicide substrates by rf magnetron sputtering at substrate temperatures of 50°–500°C. The films with the best orientation and crystallinity were prepared at 300°C. The dependence of film microstructure on substrate temperature was investigated by atomic force microscopy (AFM). Consequently, the microstructure changed in accordance with the model proposed by Thornton. It was found that the orientation and crystallinity of the films were optimal when the films consisted of dense fibrous grains. Further, it was confirmed that piezoelectric measurements could be made from the films during mechanical impacts.     

Chitosanase activity of the enzyme previously reported as beta-1,3-1,4-glucanase from Bacillus circulans WL-12

Chitosanases 33 kDa and 40 kDa in size were detected in the culture supernatant of Bacillus circulans WL-12. One of the two chitosanases, chitosanse 40 (40-kDa chitosanase) has been shown to be identical to the enzyme which has been reported previously as a beta-1,3-1,4-glucanase by Bueno et al. The enzyme has been classified into family 8 glycosyl hydrolases together with the enzymes formally known as cellulase family D. This enzyme named chitosanase 40/beta-1,3-1,4-glucanase hydrolyzed both chitosan and beta-1,3-1,4-glucan with similar efficiency. However, the production of the enzyme was induced with chitosan but not by beta-1,3-1,4-glucan. Therefore, it seems possible that the major substrate of this enzyme is chitosan rather than beta-1,3-1,4-glucan. Analysis of degradation products generated from partially N-acetylated chitosan showed that chitosanase 40/beta-1,3-1,4-glucanse hydrolyzes GlcN-GlcN and GlcN-GlcNAc linkages but not GlcNAc-GlcNAc nor GlcNAc-GlcN. The specificity for hydrolyzing linkages of this enzyme is similar to that of the chitosanase from S. griseus HUT6037.     

Preoperative evaluation of the limitation of hepatic resection using 99mTc-GSA (galactosyl human serum albumin) scintigraphy

Preoperative evaluation of the operative indication of hepatic resection using the parameters obtained by 99mTc-GSA scintigraphy has been done. In particular, the accurate evaluation of the postoperative hepatic functional reserve essentially depends on these parameters. In the present study, a preoperative evaluation of postoperative hepatic functional reserve using 99mTc-GSA scintigraphy was performed in our operated cases retrospectively. PATIENTS AND METHODS: Thirty-eight patients who underwent hepatic resection were studied on 99mTc-GSA scintigraphy before and after operation. These patients were divided into two groups. Group A; had no postoperative complications (n = 31). Group B; had some postoperative complications (n = 7). Preoperative parameters of 99mTc-GSA liver scintigraphy (HH15, LU15) were calculated from the activities of liver and cardiac ROIs at 5 and 15 minutes after injection. The resection ratio (RR) was obtained by comparing the liver volumes which were calculated from the pre- and postoperative SPECT studies. The resectability indices (Res) were as follows: Res (LU15) = LU15 x (100-RR(%)/100, Res (HH15) = (1/HH15) x (100-RR (%)/100. RESULTS: There were statistically significant differences in the distribution of Res between A and B groups (p = 0.002, Mann-Whitney test). The values of Res, of which half of patients have complication, were 1.10 (Res (HH15)) and 16.4 (Res (LU15)). CONCLUSION: The resectability indices using 99mTc-GSA liver scintigraphy are useful for the preoperative evaluation of the limitation of hepatic resection.     

Control of SF6 discharge gap switch by XeCl excimer laser

Experimental studies have been carried out on triggering characteristics of the SF₆ discharge gap switch by use of XeCl excimer laser (wavelength = 308 nm). First, laser irradiation characteristics are studied on a pure SF₆ in the pressure range of p = 160 ～ 3,800 torr. Using a lens of f (focal length) = 133 mm, the laser is irradiated into the gas, where the energy absorption is studied. If the laser is injected into the gas with the energy above a certain threshold for the breakdown, the rate of energy absorption is found to be ～ 17 percent of the incident energy at p > 760 torr. Injecting the laser into the SF₆-filled gap switch (gap length = 7 mm, p = 760 torr), we have studied the triggering characteristics. Excellent triggering characteristics were obtained; delay time for the discharge ～ 20 ns, and the jitter ～ 260 ps when the gap voltage is operated at 99 percent of the self-breakdown voltage. In addition, the triggering characteristics are studied by changing the focusing point axially. It is found that both the delay time and the jitter decrease when the focusing point tends to approach the high-voltage electrodes.     

Distribution and localization of galectin purified from Rana catesbeiana oocytes

Galectins are a family of lectins that recognize beta-D-galactosides independently of calcium ions, and are widely distributed in animals. To characterize a galectin previously purified from oocytes of Rana catesbeiana (American bullfrog), we studied its distribution and localization in several tissues from this frog. Hemagglutination assay and western blotting showed that this lectin is present in many tissues including the liver, skin, kidney, skeletal muscle, and sciatic nerve, but is particularly concentrated in the ovary. Light microscopic immunohistochemistry showed that this lectin is localized in such places as cell-cell junctions, basement membranes, extracellular matrix, or secretory substances in several organs, indicating that this galectin is mainly distributed extracellularly. However, in the ovary, light microscopy showed that this lectin is present in or associated with the yolk platelet. Electron microscopy further revealed that it is localized in the periphery of the yolk platelet (the yolk plasm), but not in the cortical granule. These results indicate that Rana oocytes contain abundant galectin in their yolk platelets in contrast to Xenopus laevis oocytes, which have been found not to contain galectins but other classes of lectins in their yolk platelets and cortical granules.     

Development of Mo(Si,Al)<Subscript>2</Subscript>-base oxidation-resistant coating on Nb-base structural materials

Mo(Si,Al)₂-base oxidation-resistant coatings for Nb-base structural materials have been studied. The coating is composed of a Mo(Si,Al)₂-base Al reservoir and Al₂O₃ interlayer to suppress interface reactions between the Al reservoir and the substrate. To develop a suitable Al-reservoir material, some Mo(Si_0.6,Al_0.4)₂-HfB₂ composites were prepared. Their oxidation resistance and coefficients of thermal expansion were investigated, in addition to their chemical reactivity with the Nb substrate at high temperatures. As a result, Mo(Si_0.6,Al_0.4)₂-20 vol pct HfB₂ was selected as one of the satisfactory Al reservoirs. The introduction of a stable Al₂O₃ interlayer was attempted using a novel powder metallurgical process to overlay the Nb substrates with the Al reservoir, where the Nb substrates were subjected to a slight surface oxidation prior to the coating process. The Nb specimens, which are thoroughly coated with the Al reservoir and Al₂O₃ interlayer, can be successfully fabricated by this method. The coated Nb specimens are not damaged at all after prolonged exposure in flowing Ar-20 pct O₂ at 1673 K for 120 hours. Furthermore, the Al₂O₃ interlayer is very effective and no reactions occur at the interface. Thus, this Mo(Si,Al)₂-base oxidation-resistant coating is applicable to Nb. The utility of the coating system is also confirmed for a Nb_SS/Nb₅Si₃ composite. This article is based on a presentation made in the symposium entitled “Beyond Nickel-Base Superalloys,” which took place March 14–18, 2004, at the TMS Spring meeting in Charlotte, NC, under the auspices of the SMD-Corrosion and Environmental Effects Committee, the SMD-High Temperature Alloys Committee, the SMD-Mechanical Behavior of Materials Committee, and the SMD-Refractory Metals Committee.     

Effects of boron doping in low- and high-surface-area carbon powders

Two distinctive carbon materials (Saran char and SP-1 graphite) were doped with B at different loading to clarify the intrinsic effect of substitutional B on carbon reactivity. The carbon precursors would be affected in different style by substitutional B due to different important properties (crystallinity and surface area). The B retentivity depended on the nature of B dopant and carbon substrate; a less ordered carbon has higher B loading than its counterpart. Graphitization was enhanced by substitutional B, as expected. Furthermore, the B incorporation was still beneficial for SP-1 although it already had high crystallinity. An interesting behavior was noticed; the increase in L_a was greater than L_c. The intrinsic effect of substitutional B in carbon oxidation was proved to be a catalytic one. Unlike highly ordered SP-1 graphite, Saran char showed both a catalytic effect at low B loading and low conversion, and an inhibiting effect at high B loading and high conversion. The inductive effect was proposed to explain this catalytic effect on different crystallite size. Different sizes of carbon clusters were calculated by Gaussian 98W; the extent of the effect of substitutional B did get smaller to the carbon in bigger size of carbon cluster.     

A novel mutant allele of Schizosaccharomyces pombe rad26 defective in monitoring S-phase progression to prevent premature mitosis

A semipermissive growth condition was defined for a Schizosaccharomyces pombe strain carrying a thermosensitive allele of DNA polymerase delta (pol delta ts03). Under this condition, DNA polymerase delta is semidisabled and causes a delay in S-phase progression. Using a genetic strategy, we have isolated a panel of mutants that enter premature mitosis when DNA replication is incomplete but which are not defective for arrest in G2/M following DNA damage. We characterized the aya14 mutant, which enters premature mitosis when S phase is arrested by genetic or chemical means. However, this mutant is sensitive to neither UV nor gamma irradiation. Two genomic clones, rad26+ and cds1+, were found to suppress the hydroxyurea sensitivity of the aya14 mutant. Genetic analysis indicates that aya14 is a novel allele of the cell cycle checkpoint gene rad26+, which we have named rad26.a14. cds1+ is a suppressor which suppresses the S-phase feedback control defect of rad26.a14 when S phase is inhibited by either hydroxyurea or cdc22, but it does not suppress the defect when S phase is arrested by a mutant DNA polymerase. Analyses of rad26.a14 in a variety of cdc mutant backgrounds indicate that strains containing rad26.a14 bypass S-phase arrest but not G1 or late S/G2 arrest. A model of how Rad26 monitors S-phase progression to maintain the dependency of cell cycle events and coordinates with other rad/hus checkpoint gene products in responding to radiation damage is proposed.     

Heterogeneous Multi-Core Architecture That Enables 54x AAC-LC Stereo Encoding

This paper describes a heterogeneous multi-core processor (HMCP) architecture that integrates general-purpose processors (CPUs) and accelerators (ACCs) to achieve exceptional performance as well as low-power consumption for the SoCs of embedded systems. The memory architectures of CPUs and ACCs were unified to improve programming and compiling efficiency. Advanced audio codec-low complexity (AAC-LC) stereo audio encoding was parallelized on a heterogeneous multi-core having homogeneous processor cores and dynamically reconfigurable processor (DRP) ACC cores in a preliminary evaluation of the HMCP architecture. The performance evaluation revealed that 54times AAC encoding was achieved on the chip with two CPUs at 600 MHz and two DRPs at 300 MHz, which achieved encoding of an entire CD within 1- 2 min.