Crystalline Sodium Selenocarboxylates – synthesis and characterization

A series of sodium selenocarboxylates 2 were isolated from the reaction of diacyl selenides with sodium ethanolate and characterized. A convenient preparation of the sodium salts 2 by the direct reaction of acyl chlorides with sodium selenide was also established. The salts are colourless to slightly pale yellow crystals and labile towards moisture. They readily react with alkyl iodides at room temperature to give the corresponding Se-alkyl esters 3 .     

Effects of fatty acid and emulsifier on the complex formation and in vitro digestibility of gelatinized potato starch

The effects of fatty acid, monoacylglycerol, and polyglycerol fatty acid ester with varying chain length in their acyl chains on the extent of complex formation (complex index) and in vitro enzymatic digestibility of gelatinized potato starch were investigated. The complex index increased with increase in the concentration of the ligands (fatty acid, monoacylglycerol, and polyglycerol fatty acid ester), with the plateau in the complex index value depending on the type of ligands. In comparison of complex index among fatty acid-samples, the complex index maximum increased as the chain length increased up to octanoic acid and then decreased. In comparison of complex index among fatty acid-, monoacylglycerol-, and polyglycerol fatty acid ester-samples at each acyl chain, the complex index maximum followed the order polyglycerol fatty acid ester > monoacylglycerol > fatty acid. Fatty acid, monoacylglycerol, and polyglycerol fatty acid ester with long acyl chains greatly reduced the enzymatic hydrolysis of starch. Polyglycerol fatty acid ester with palmitic acid chains was the strongest inhibitor of starch hydrolysis, suggesting that further complex formation may occur during the hydrolysis of gelatinized starch (enzyme-annealing).     

Reversible and Precisely Controllable p/n‐Type Doping of MoTe2 Transistors through Electrothermal Doping

Precisely controllable and reversible p/n‐type electronic doping of molybdenum ditelluride (MoTe₂) transistors is achieved by electrothermal doping (E‐doping) processes. E‐doping includes electrothermal annealing induced by an electric field in a vacuum chamber, which results in electron (n‐type) doping and exposure to air, which induces hole (p‐type) doping. The doping arises from the interaction between oxygen molecules or water vapor and defects of tellurium at the MoTe₂ surface, and allows the accurate manipulation of p/n‐type electrical doping of MoTe₂ transistors. Because no dopant or special gas is used in the E‐doping processes of MoTe₂, E‐doping is a simple and efficient method. Moreover, through exact manipulation of p/n‐type doping of MoTe₂ transistors, quasi‐complementary metal oxide semiconductor adaptive logic circuits, such as an inverter, not or gate, and not and gate, are successfully fabricated. The simple method, E‐doping, adopted in obtaining p/n‐type doping of MoTe₂ transistors undoubtedly has provided an approach to create the electronic devices with desired performance.     

Direct modulation characteristics of GaInAsP/InP d.h. lasers with various stripe widths measured by sharp-pulse method

The direct modulation characteristics of GaInAsP/InP d.h. lasers emitting at 1.3 ?m with various stripe widths were measured by the proposed sharp-pulse method. As a result, a flat modulation frequency response up to 1.9 GHz was observed in a laser diode with 5 ?m stripe width.     

Novel design scheme for high-speed MQW lasers with enhanceddifferential gain and reduced carrier transport effect

We present a theoretical analysis exploring the optimum design of high-speed multiple-quantum-well (MQW) lasers for 1.55-μm operation. Various combinations of well and barrier materials are examined for lattice-matched, strained-layered (SL), and strain-compensated (SC) MQW lasers with InGaAsP and InGaAlAs barriers. The gain characteristics are investigated for these MQW lasers with various barrier bandgap wavelengths and are used to evaluate the modulation characteristics based on the carrier dynamics model which includes a set of Poisson, continuity, and rate equations. The importance of band engineering aimed at simultaneously reducing the carrier transport effect and enhancing the differential gain is described. It is shown that SC-MQW lasers with InGaAlAs barriers have an advantage in reducing the density of states in the valence band by reducing the overlap integral between the heavy- and light-hole wave functions, which effect has previously been discarded as a minor correction in designing conventional InGaAsP-based MQW lasers. Furthermore, the hole transport rate across the barriers can be drastically reduced in SC-MQW lasers due to the reduced effective barrier height for the holes. Based on this novel design scheme, a 3-dB bandwidth approaching 70 GHz is expected for 20-well SC-MQW lasers with InGaAlAs barriers as a result of both the large differential gain and reduced transport effect     

Basic study of a ship navigator's mental workload using salivary NO\documentclass{article}\usepackage{amsmath}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{amsfonts}\pagestyle{empty}\begin{document}$_{3}^{-}$ \end{document}

Evaluation of the mental workload during training for ship handling has usually depended on professionals (captain, pilot) who have lots of experience on board. We are attempting to evaluate a ship navigator's mental workload based on a physiological index. The physiological indices, namely heart rate variability (R–R interval), nasal temperature, and salivary amylase, are good indices for reading the mental workload during ship handling. Moreover, we find the possibility of using salivary NO$_{3}^{-}$ as a good index for evaluating the ship navigator's mental workload. Salivary NO$_{3}^{-}$ is expected to have a specific characteristic to represent quick response on the spot and the trend. We confirmed the response of students during simulator training, and then carried out the experiment on professionals on a real ship. We propose that salivary NO$_{3}^{-}$ can show a ship navigator's stress for ship handling in the simulator and on a real ship. This work to evaluate the ship navigator's mental workload using salivary NO$_{3}^{-}$ is the first attempt worldwide. © 2013 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Liquid phase growth of graphene on silicon carbide

We developed a novel method to produce graphene on silicon carbide (SiC) at a temperature as low as 1000 °C. The method is based on liquid phase growth (LPG) of graphene mediated by liquid gallium, which acts not only as a flux to store carbon dissolved from a surface of SiC when heated, but also as a catalyst to promote the formation of graphene on SiC when cooled. Our experimental results revealed that gallium-treated SiC substrates are coated with uniform and continuous graphene films. The LPG method is able to supply graphene films consisting of one to several hundreds of layers, depending on heating temperatures. Our approach can not only provide an alternative way to form graphene natively on SiC, but will also bring a technological breakthrough in industrial applications of graphene, e.g. the realization of graphene-on-insulator substrates.     

Cloning and characterization of a β-N-acetylglucosaminidase (BmFDL) from silkworm Bombyx mori

In insects, β-N-acetylglucosaminidase (GlcNAcase) participates in critical physiological processes such as fertilization, metamorphosis, and glycoconjugate degradation. Insects produce glycoproteins carrying paucimannosidic-type N-glycans, the terminal GlcNAc residue of which is cleaved by a GlcNAc-linkage specific GlcNAcase, also known as the fused lobes (FDL) protein. To obtain information on the structure of GlcNAcases and insight into their contribution to physiological processes, we cloned Bombyx mori FDL (BmFDL) from silkworm larvae. The full-length cDNA (1.9 kb) encoded a protein of 633 amino acids with 42% amino acid sequence identity to Drosophila melanogaster FDL (DmFDL). Recombinant BmFDL cleaved only β-1,2-linked GlcNAc residues from the α-1,3 branch of biantennary N-glycan. This substrate specificity was similar to that of DmFDL. Microsomal FDL activity was inhibited by anti-BmFDL antibodies. Taken together, our results suggest that BmFDL is a N-glycan-processing GlcNAcase in B. mori.     

Catalytic C-h/olefin coupling

The cleavage and addition of ortho C-H bonds in various aromatic compounds such as ketones, esters, imines, imidates, nitrile, and aldehydes to olefins and acetlylenes can be achieved catalytically with the aid of ruthenium catalysts. The reaction is generally highly efficient and useful in synthetic methods. The coordination to the metal center by a heteroatom in directing groups such as carbonyl and imino groups is the key. The reductive elimination to form a C-C bond is the rate-determining step.