A dual-parameter multichannel analyzer by a dual-computer system

The design and feasibility of a simple and practical system for measuring two-parameter signals is reported. A dual-parameter multichannel pulse-height analyzer (MCA) which uses two central processing units (CPUs) is developed and designed. One computer (master computer) controls the other computer (slave computer), and also displays, records, and analyzes the data. The slave computer controls two analog-to-digital converters (ADCs), collects the dual-parameter data, and transfers the collected data to the master computer. Three methods of data transfer between the two CPUs are examined and discussed. The count capacity at the data collection by the slave computer is 2¹⁶-1/ch (2-B-long data), and this is expanded to 2³²-a/ch (4-B-long data) at the master computer. The data are analyzed and at any time stored in the storage apparatus by the dual CPU system. The system demonstrates stable operation over long measurement periods     

Idiopathic restrictive cardiomyopathy with diffuse perimyocytic fibrosis--a rare observation

Idiopathic restrictive cardiomyopathy (RCM) is rare. Even today little is understood of its etiology or underlying mechanisms, and definitive diagnostic criteria are lacking. In this report, we describe a case of idiopathic RCM in a young Japanese woman who died while awaiting cardiac transplantation during the 5-year course of the disease. Rare pathologic findings of diffuse perimyocytic fibrosis were revealed at autopsy.     

Negative faradaic resistance in extracellular electron transfer by anode-respiring Geobacter sulfurreducens cells

Geobacter sulfurreducens is a gram-negative δ-proteobacterium that is capable of transferring respiratory electrons to solid-state extracellular acceptors, including anodes, via abundant c-type cytochromes expressed in the outer membrane. As extracellular electron transfer (EET) to solid-state acceptors can proceed without the addition of exogenous mediators, this microbe has attracted significant attention with respect to energy conversion between electrical and chemical energy. Here, we revealed that clear redox peaks were present in the whole-cell cyclic voltammogram of G. sulfurreducens at around -0.15 V vs Ag|AgCl when tin-doped In(2)O(3) (ITO) glass was used as an anode. Interestingly, the EET current decreased in the potential region more positive than the midpoint potential (E(m)) of the redox peak. Thus, EET of anode-respiring G. sulfurreducens cells exhibited a negative Faradaic resistance (NFR) characteristic at the E(m) of the redox peak, in contrast to general electrochemical systems where the Faradaic current typically increases with increasing overpotential.     

Determining the minimum iteration period of an algorithm

Digital signal processing algorithms are repetitive in nature. These algorithms are described by iterative data-flow graphs where nodes represent computations and edges represent communications. For all data-flow graphs, there exists a fundamental lower bound on the iteration period referred to as theiteration bound. Determining the iteration bound for signal processing algorithms described by iterative data-flow graphs is an important problem. In this paper we review two existing algorithms for determination of the iteration bound. Then we propose another novel method based on theminimum cycle mean algorithm to determine the iteration bound with a lower polynomial time complexity than the two existing techniques. It is convenient to represent many multi-rate signal processing algorithms by multi-rate data-flow graphs. The iteration bound of a multi-rate data-flow graph (MRDFG) can be determined by considering the single-rate data-flow graph (SRDFG) equivalent of the MRDFG. However, the equivalent single-rate data-flow graph contains many redundant nodes and edges. The iteration bound of the MRDFG can be determined faster if these redundancies in the equivalent SRDFG are first removed. A previous approach has considered elimination of edge redundancy. In this paper we present an approach to eliminatenode redundancy in the MRDFG. We combine elimination of node and edge redundancies to propose a novel algorithm for faster determination of the iteration bound of the MRDFG.This research was supported by the Advanced Research Projects Agency and monitored by Wright—Patterson AFB under contract number F33615-93-C-1309.     

Thoracoabdominal aortic repair without using assisted bypass

A 41-year-old man, who had undergone descending aortic repair following rupture of the DeBakey type III aortic dissection, underwent thoracoabdominal aneurysm repair 1 year after the first surgery. The operation was performed by partial-clamping and single crossclamping without using assisted bypass or shunt, in order to minimize bleeding ensuing the re-thoracotomy and dissection between lung and the graft.     

Cutting plane methods for Lagrangian relaxation‐based unit commitment algorithm

In this paper, we study cutting plane methods for a Lagrangian relaxation‐based unit commitment algorithm. In the algorithm, nondifferentiable optimization methods can be applied to optimize the dual function, and a subgradient method which needs parameter tuning and has some drawbacks such as computational inefficiency and oscillating behavior is commonly used. The cutting plane method and the central cutting plane method are applied to the algorithm and implemented using reoptimization techniques. A numerical example shows that both methods are accelerated by the reoptimization techniques and have good convergence without parameter tuning. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 141(3): 17–29, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10066     

Self oscillation phenomena of turbulent jets in a channel

A new method based on the Coanda effect for self oscillation of a circular jet bounded by rectangular enclosure is suggested. The experiments in both air and water reveal regions of stable oscillation wherein relationships are obtained between the Strouhal number and the shape factor of the channel. This oscillation method can also be used to mix different liquids in a vessel. For such applications, an improvement of mixing by oscillation is shown by means of a residual concentration diagram for a salt solution.     

Pulsed laser focusing for triggering arc discharge in an arc welding system

In tungsten inert gas (TIG) arc welding systems, arc plasma is generated between the cathode (tungsten rod) and anode (workpiece).¹ Availability of a dependable technique for triggering arc discharge is indispensable for production processes using arc welding. Typical conventional triggering techniques include the high-frequency, high-voltage and touch-start methods. The high-frequency and high-voltage methods involve arc discharge being triggered through ionization of the gas present between the electrodes by means of a conventional high-frequency generator or high-voltage DC generator.² The high-frequency method, however, may possibly disrupt operation of peripheral computer systems, whereas the high-voltage method involves suitable electric circuits being arranged inside the power source to prevent high voltage-related accidents.^{2, 3} After the rod is lowered to make contact with the workpiece in the touch-start method, it is quickly withdrawn to trigger the arc. This method obviates the need for any power source other than the arc welding power source. An important advantage of the touch-start method therefore is its simplicity. When the rod is withdrawn, however, part of it (tungsten) may sustain melt-through to the workpiece in a way that adversely affects weld quality. This is a disadvantage of the touch-start method.₃