船用柴油机NOx等有害排放气体的评价及处理研究--燃料喷射系统对乳化燃料在船用柴油机上使用的影响及脱硝装置的适用性

对原试验用柴油机的燃料喷射系统进行了改造。改造后的燃料喷射系统不仅可降低 NOx 的排放 ,而且使高加水率乳化燃料的使用成为可能。但另一方面 ,在低负荷时 ,使用乳化燃料不但不能获得预期的降低 NOx 排放效果 ,反而使其它有害排放增加。所以 ,也对降低 NOx 排放方法之一的脱硝装置进行了探讨 ,对其在船用柴油机上的适用性进行了试验 ,并获得了较好的效果     

Phase diagram for the helical texture in 3He-A

The stability region of the helical textures in³He-A in thev _s-H phase diagram is theoretically determined. Herev _sis the superflow velocity andH (v _s) is the external magnetic field. The pitch of the helixk ^–1 that minimizes the Gibbs free energy and the corresponding inclination angles ofl andd are determined numerically as functions ofv _sandH. The NMR frequencies (two longitudinal and four transverse frequencies) associated with the helical texture are obtained.Work supported by the National Science Foundation under Grant No. DMR 76-21032.     

Effect of addition of corrosion inhibitors on corrosion behaviors of PCV material under diluted artificial seawater environment

ABSTRACT

Fukushima Daiichi nuclear power plants (1F) were damaged by unprecedented severe accident in the great east Japan earthquake, and seawater and freshwater had been injected as an emergency countermeasure for the core cooling. Although, the primary containment vessel (PCV) was not supposed to be exposed to diluted seawater, the PCV will be exposed to diluted seawater environment until fuel debris removal is completed. Therefore, it is necessary to establish a countermeasure of corrosion for the PCVs made of carbon steel. In this study, the effect of the addition of corrosion inhibitor, which is one of the corrosion countermeasures, was investigated by two types of corrosion tests. As a result of the immersion corrosion test, it was found that any of the three kinds of corrosion inhibitor could suppress corrosion of carbon steel. In addition, as a result of the inhibitor interim addition test, it was found that corrosion of carbon steel covered with corrosion products could be suppressed by optimizing the additive amount of corrosion inhibitor in the cooling water.     

Use of residual voltage for diagnosis of electrical power cables used in nuclear power stations

This paper describes the fundamental characteristics of the residual voltage and the relationship between irradiation dose and residual voltage in electric power cable used in nuclear power generating stations. The residual voltage of unirradiated cable increases with time, tending to saturate. The saturated value of residual voltage is nearly proportional to bias voltage. This result supports the residual voltage of cable being caused by depolarization. From theoretical and experimental investigations we found that the residual voltage is not influenced by cable size or length. This is an important merit of residual voltage as the nondestructive diagnosis. When dose is more than 500 kGy, the residual voltages exhibit a peak. As the irradiation dose is increased, the peak moves to shorter time. Therefore, we can determine the degree of radiation degradation from the location of the peak. © 1997 Scripta Technica, Inc. Electr Eng Jpn 119(2): 18–25, 1997     

Molecular and Genetic Interactions between CCN2 and CCN3 behind Their Yin–Yang Collaboration

Cellular communication network factor (CCN) 2 and 3 are the members of the CCN family that conduct the harmonized development of a variety of tissues and organs under interaction with multiple biomolecules in the microenvironment. Despite their striking structural similarities, these two members show contrastive molecular functions as well as temporospatial emergence in living tissues. Typically, CCN2 promotes cell growth, whereas CCN3 restrains it. Where CCN2 is produced, CCN3 disappears. Nevertheless, these two proteins collaborate together to execute their mission in a yin–yang fashion. The apparent functional counteractions of CCN2 and CCN3 can be ascribed to their direct molecular interaction and interference over the cofactors that are shared by the two. Recent studies have revealed the mutual negative regulation systems between CCN2 and CCN3. Moreover, the simultaneous and bidirectional regulatory system of CCN2 and CCN3 is also being clarified. It is of particular note that these regulations were found to be closely associated with glycolysis, a fundamental procedure of energy metabolism. Here, the molecular interplay and metabolic gene regulation that enable the yin–yang collaboration of CCN2 and CCN3 typically found in cartilage development/regeneration and fibrosis are described.     

Investigation of electron trapping behavior in n-channel organic thin-film transistors with ultrathin polymer passivation on SiO2 gate insulator

Electron trapping behavior at the interface between N,N′-ditridecyl-3,4,9,10-perylene tetracarboxylic diimide (PTCDI-C13) film and thermal SiO₂ was investigated by utilizing ultrathin poly(methyl methacrylate) (PMMA) gate passivation layers. From the capacitance–voltage analysis for the PTCDI-C13/PMMA/SiO₂ interface, it is found that the electron tunneling appeared with PMMA thinner than 0.8 nm, and that the thickness of the gate passivation layer should be at least 1 nm for preventing injection-type hysteresis in the capacitance–voltage curve. The effective electron mobility of organic thin-film transistors (OTFTs) based on PTCDI-C13 with SiO₂ gate insulator was increased by suppressing shallow-level interface traps on SiO₂ with the PMMA layer, which can be partially accounted for by the multiple trap and release model. In this work, the thickness and the density of the PMMA layers were precisely controlled with a simple spin-coating process. Even 1.3-nm thick PMMA layer caused the improvements of the electron mobility and the air stability of the n-channel conduction.     

Behaviour of chromium steels in liquid Pb-55.5Bi with changing oxygen content and temperature

The behaviour of protective oxide layers on P122 steel and its welds and of ODS steel in liquid Pb_44.5Bi_55.5 (LBE) is examined under conditions of changing temperatures and oxygen concentrations. P122 (12Cr) and its welded joints are exposed to LBE at 550 °C for 4000 h with oxygen concentrations of 10⁻⁶ and 10⁻⁸ wt% (p(O₂) = 8.1 × 10⁻²³ bar and 5.2 × 10⁻²⁷ bar) which change every 800 h. It is found that like in case of constant oxygen concentration of 10⁻⁶ wt% a protective spinel layer (Fe(Fe_1−xCr_x)₂O₄) was maintained on P122 and also on its welded joint. Two experiments with exposure times of 4800 h are conducted on ODS steel, both with temperatures changing from 550 to 650 °C and back every 800 h, one experiment with 10⁻⁶ the other with 10⁻⁸ wt% oxygen in LBE. Both experiments show strong local dissolution attack after 4800 h which is in agreement with the behaviour of ODS in LBE at a constant temperature of 650 °C. However, dissolution attack is less in LBE with 10⁻⁸ wt% oxygen (p(O₂) = 3.0 × 10⁻²⁵ bar).