Investigation for Necessity of Dispersivity and Tortuosity in the Dusty Gas Model for a Binary Gas System in Soil

Diffusion, dispersion, and advection are important processes in multi-gas systems in soils. To date, both Fick's model and the Dusty Gas (DG) model have been used to model the movement of gases in these systems. Dispersion is included in the dispersion-advection equation with Fick's Model for the movement of gases in gas-phase of soil, yet the movement of gases in multi-component gas-soil systems is considered to be expressed more accurately by the DG model than by Fick's model. However to date, no study has investigated the necessity of considering dispersion in the Dusty Gas (DG) model. We carried out column experiments for nitrogen-methane, nitrogen-carbon dioxide, and carbon dioxide-methane binary gas systems in sandy soil, and also did simulations on the same systems using both Fick's model and the DG model. A comparison of the results of the column experiments with our simulations confirmed that there was no need to consider the dispersion in the advection-diffusion equations with the DG model when the velocity of gas was 0.05-0.4 cm/s in Toyoura sand. Furthermore, our experiments and simulations with the DG model showed that, rather than dispersion, tortuosity should be taken into account in application of the DG model to the above condition.     

Structure and properties of poly(vinyl alcohol)/κ‐carrageenan blends

Blends of a commercial atactic poly(vinyl alcohol) (a‐PVA) derived from vinyl acetate and κ‐carrageenan were prepared by mixing the aqueous solutions of both samples. Blend films prepared by casting were transparent. In the DSC curves of the blend films, the endothermic peaks shifted to lower temperature with an increase of the content of κ‐carrageenan. The Young's modulus and the strength at break increased with an increase of the content of a‐PVA. As the standing temperature of the blend solutions decreased, the gelation region increased also at high content of carrageenan. In the amorphous regions of blend films, a‐PVA and κ‐carrageenan were miscible. © 2001 Society of Chemical Industry     

Applying heat integration total site based pinch technology to a large industrial area in Japan to further improve performance of highly efficient process plants

“Area-wide pinch technology” which consists of R-curve analysis and Site Source Sink Profile (SSSP) analysis, was applied to Kashima industrial area, one of the biggest heavy chemical complexes in Japan. This case study demonstrates that despite the very high efficiency of the individual sites in the complex, there is a huge amount of energy saving potential through energy sharing among the various sites. In addition it was found that appropriate use of the available pinch technology tools and techniques allows an industrial area of enormous scale and complexity to be analysed conveniently. This has resulted in practical area-wide energy saving projects being proposed and implemented.     

微波活化法从甲烷合成乙烯

利用微波活化法从甲烷催化偶合合成了乙烯。在5% Pt/c Lot 86111催化剂情况下得到了3.65%甲烷转化率和近100%的乙烯选择性。同一催化剂在热反应条件下完全没有反应活性。     

High-Performance Induction Motor Drive System Using a PWM Inverter

A high-performance speed control system for cage induction motors is described which utilizes a PWM inverter. The effects of primary current coincidence and machine constant variation on system characteristics such as response time, torque precision, and operating noise were investigated. Based on the results obtained, new control methods have been devised; one varies the gain of the current controller in proportion to the primary frequency, and a second compensates for the slip frequency by using the deviation between the flux reference value and the actual value. Effectiveness of the compensation methods was confirmed in tests.     

First paralytic shellfish poison (PSP) infestation of bivalves due to toxic dinoflagellate Alexandrium tamiyavanichii, in the southeast coasts of the Seto Inland Sea, Japan

The mussel Mytilus edulis and the cultured ark shell Anadara broughtonii in the southeast coasts of the Seto Inland Sea were contaminated with paralytic shellfish poison (PSP) following the appearance of the dinoflagellate Alexandrium tamiyavanichii in early December 1999. A. tamiyavanichii plankton collected around the Straits of Naruto on December 3, 1999 showed PSP toxicity, of which 83 mol% was accounted for by GTX2, GTX3 and GTX4. Its specific toxicity was 112.5 fmol/cell, and one MU was equivalent to 7,200 cells. Toxicity values at the beginning of toxification were 4.7 MU/g for the ark shell and 7.3 MU/g for the mussel. In the former, the value remained at almost 4 MU/g, resulting in prohibition of marketing for about two months. In the latter, it sharply decreased to less than 4 MU/g. These bivalves collected during the toxification period were dissected into five tissues, mantle, adductor muscle, hepatopancreas, gills and "others", and submitted to high-performance liquid chromatography (HPLC). The cultured ark shell accumulated GTX2, GTX3 and STX as major components and GTX1, GTX4, GTX5, neoSTX, dcSTX and PX1-3 (C1-C3) as minor ones. The amount of GTX3 decreased with time, while STX tended to increase. At the early stage of PSP toxification, toxins were accumulated in the gills and "others", most of which were quickly detoxified. On the other hand, PSP of the toxified mussel consisted of GTX4 as a main component, and GTX1, GTX2, GTX3, GTX5, STX and PX1-2 (C1-C2) as minor ones. Its toxin composition pattern was similar to that of the ingested causative plankton. Its total toxin decreased soon after disappearance of the dinoflagellate. During the decrease of toxicity, PSP tended to be retained in the hepatopancreas, resulting in accumulation of 50 mol% of total toxin.