Nonlinear motion correction of respiratory-gated lung SPECT images

We propose a method for correcting the motion of the lungs between different phase images obtained by respiratory-gated single photon emission computed tomography (SPECT). This method is applied to SPECT images that show a preserved activity distribution in the lungs such as 99m-Tc macro aggregated albumin (99m-Tc-MAA) perfusion images and 99m-Tc-Technegas ventilation images. In the proposed method, an objective function, which consists of both the degree of similarity between a reference image and a deformed image, and the smoothness of deformation is defined and optimized using a simulated annealing algorithm. For the degree of similarity term in the objective function, an expansion ratio, defined as the ratio of change in local volume due to deformation, is introduced to preserve the total activity during the motion correction process. This method was applied to data simulated from computer phantoms, data acquired from a physical phantom, and 17 sets of clinical data. In all cases, the motion correction between inspiration and expiration phase images was successfully achieved.     

Occurrence of estrogenic compounds in and removal by a swine farm waste treatment plant

The total estrogenic activity of the wastewater from a swine farm in Japan was quantitatively characterized, and the compounds responsible for the estrogenic activity were identified and quantified. The wastewater treatment process consisted of a series of an up-flow anaerobic sludge blanket (UASB) and a trickling filter. Samples were collected at each treatment step, and the total estrogenic activity was determined by use of an in vitro gene expression assay (MVLN; MCF-7 human breast cancer cell stably transfected with the pVit-tk-LUC receptor plasmid). Individual estrogenic compounds were identified and quantified using liquid chromatography-mass spectrometry (LC/MS) and liquid chromatography-tandem mass spectrometry (LC/ MS/MS). To further identify the compounds contributing to the estrogenic activity in the wastewater, the sample extracts were fractionated into 12 fractions (fractions 1-12) by HPLC. The rate of removal of estrogenic activity between the effluent and the influent was greater than 97%. The trickling filter removed the majority of the estrogenic activity. The removal rates of specific estrogenic compounds ranged from 44 to 99%. Estrogenic activity was detected mainly in the fractions containing estrone (El), 17beta-estradiol (betaE2), 17alpha-estradiol (alpha E2), estriol (E3), bisphenol A (alphaPA), and equol (EQ0). The ratios of betaE2-EQc (betaE2 equivalents derived from chemical analysis) to betaE2-EQB (betaE2 equivalent derived from bioassay) in the 12 fractions collectively were contributed by El (17-30%), betaE2 (23-30%), acE2 (<1%), E3 (1-2%), BPA (<1%), and EQO (2-3%) in the influent and El (16-37%), PE2 (<1-7%), alphaE2 (<1%), E3 (<1-3%), BPA (<1%), and EQO (<1%) in the effluent. The compounds responsible for most of the estrogenic activity measured in the bioassay were natural estrogens such as El and betaE2.     

Model comparison for Escherichia coli growth in pouched food

We recently studied the growth characteristics of Escherichia coli cells in pouched mashed potatoes (Fujikawa et al., J. Food Hyg. Soc. Japan, 47, 95-98 (2006)). Using those experimental data, in the present study, we compared a logistic model newly developed by us with the modified Gompertz and the Baranyi models, which are used as growth models worldwide. Bacterial growth curves at constant temperatures in the range of 12 to 34 degrees C were successfully described with the new logistic model, as well as with the other models. The Baranyi gave the least error in cell number and our model gave the least error in the rate constant and the lag period. For dynamic temperature, our model successfully predicted the bacterial growth, whereas the Baranyi model considerably overestimated it. Also, there was a discrepancy between the growth curves described with the differential equations of the Baranyi model and those obtained with DMfit, a software program for Baranyi model fitting. These results indicate that the new logistic model can be used to predict bacterial growth in pouched food.     

Thermal Properties of Al-50%Si Alloys

AS FOR Al-Si alloy,this alloy with the characteristicsuch as excellent in a low coefficient of thermalexpansion(CTE),high-heat-conductivity,and wearresistance is used for the piston material of the engine,the heat radiation material,and electronic application1'2.The CTE of the Al-Si alloy decreases further withincreasing Si content because the CTE of Si is low3.The strength and wear resistance of Al-Si alloydecrease with increasing Si content because eutectic Siis coarse grain size an…     

Purification and properties of an extracellular inulinase from Rhizopus sp. strain TN-96

A filamentous fungus, Rhizopus sp. strain TN-96, was isolated from rhizosphere soil samples. An extracellular inulinase was purified from the culture filtrate of strain TN-96 grown on inulin by DEAE-Cellulofine A-500 and Sephacryl S-200 HP chromatographies. The enzyme was homogeneous as judged by SDS-polyacrylamide gel electrophoresis, with an apparent M(r) of 83 kDa. The purified enzyme had specific activities of 17 U/mg toward inulin (I) and 0.32 U/mg toward sucrose (S) (I/S ratio, 53). Inulinase activity was optimal at pH 5.5 and 40 degrees C. The inulinase exhibited an apparent K(m) value of 9.0 mM for inulin. The enzyme also hydrolyzed raffinose, but not bacterial levan.     

An absorption-based surface plasmon resonance sensor applied to sodium ion sensing based on an ion-selective optode membrane

A surface plasmon resonance (SPR) sodium ion sensor using an ion optode membrane film was experimentally and theoretically described based on an absorption-based SPR principle proposed in our previous article (Kurihara, K; Suzuki, K. AnaL Chem. 2002, 74, 696-701). The sodium ion concentrations from 10(-6) to 10(-1) have been successfully determined not only by the resonance angle diagnosis of the SPR curve but also by the minimum reflectance one. The ion optode film was plasticized poly(vinyl chloride) including a neutral sodium ionophore, a pH-sensitive cationic dye, and an anionic additive. Its optical absorption intensity changed with the sodium ion concentrations. The SPR ion sensor physically measured the complex refractive index caused by the absorption in the ion optode film. We have exhaustively investigated the experimental response behavior of the SPR curve relative to the sodium ion concentrations by comparison with numerically simulated SPR curves using a three-layer Fresnel equation including experimental values for the sodium ion optode membrane film. As predicted by the absorption-based SPR principle, the SPR curve behavior of the SPR ion sensors depended on two factors: one was the relation between the excitation frequency of the light source and the absorption maximum frequency in the ion optode film while the other was the gold metallic thickness in the Kretchmann configuration. The concept and practical theory of an absorption-based SPR sensor not only have been proved by the experimental results of the SPR sodium ion sensor but also have successfully allowed flexible ion sensing in an SPR sensor, which would be very difficult without the absorption mechanism in the ion optode film.     

Estimation of Zn and Cu unit output loads from animal husbandry facilities

Zinc (Zn) and copper (Cu) are toxic to aquatic organisms at very low concentrations that do not affect humans. We measured the daily output of Zn and Cu in wastewater from livestock farms to aquatic environments because waste from animal husbandry operations contains high levels of Zn and Cu. At most pig farms in Japan, a mixture of urine, some faeces, and service water is treated in onsite wastewater treatment facilities and discharged into a water body. Some dairy farms also have wastewater treatment facilities. We surveyed 21 pig farms and six dairy farms. The unit (i.e., per head) output load from piggery wastewater treatment facilities ranged from 0.13 to 17.8 mg/head/d for Zn and from 0.15 to 9.4 mg/head/d for Cu. Over 70% of pig farms had unit output loads of Zn and Cu below 6 and 2 mg/head/d, respectively. For dairy farms, the unit output load from wastewater treatment facilities was estimated at 1.8-3.6 mg/head/d for Zn and 0.6 mg/head/d for Cu. The unit output load for Zn from piggery wastewater treatment facilities was similar to that from treatment facilities for human waste. However, pig farms generally raise several thousand to tens of thousands of pigs; pig farms are therefore presumed to be a significant point source of Zn in rural areas.     

Numerical simulation of buoyancy-assisting,backward-facing step flow and heat transfer in a rectangular duct

Two- and three-dimensional numerical simulations have been performed for mixed convective upward flows over a backward-facing step in a duct. The Reynolds number, expansion ratio, and aspect ratio (in 3-D simulations) were kept constant at Re = 125, ER = 2, and AR = 16, respectively. The heat flux at the wall downstream of the step was uniform. The straight wall, the step, and the side walls (in 3-D simulations) were assumed to be adiabatic. The effect of the buoyancy level, Ri^*, was the major interest in this study. It was found that the reattachment point and the peak Nusselt number point moved upstream as Ri^* was increased. The secondary recirculation region, which developed at the corner of the step, became larger. A secondary flow was also found in a cross section immediately downstream of the step. Flow directed toward the center of the duct became more intensive as Ri^* increased, which possibly resulted from an increase in the level of three-dimensionality of the flow and thermal fields. © 1999 Scripta Technica, Heat Trans Asian Res, 28(1): 58–76, 1999     

Application of porous microspheres prepared by SPG (Shirasu porous glass) emulsification as immobilizing carriers of glucoamylase (GluA)

Fairly uniform spheres of crosslinked polystyrene (PS) and polymethyl methacrylate (PMMA), prepared by a particular emulsification process using SPG (Shirasu Porous Glass) membranes and subsequent suspension polymerization, were applied for immobilizing carriers of Glucoamylase (GluA). A mixture of monomers, solvents, and oil-soluble initiator was allowed to permeate through the micropores of SPG, suspended in an aqueous solution of poly(vinyl alcohol), and polymerized while retaining the narrow size distribution during polymerization. A small amount of acrylic acid or glycidyl methacrylate (GMA) was incorporated for the immobilization of GluA via covalent bonding. Although GluA has been regarded as being difficult to retain its activity after the immobilization process, a porous structure of the carriers definitely favored the immobilization, and a maximum 55% relative activity (RA) was obtained by the physical adsorption to PMMA spheres. The reaction of epoxide in GMA with 6-aminocaproic acid provided a spacer arm for the carboxyl group. An improvement of activity was expected by the incorporation of the spacer arms; however, barely noticeable activity was observed for PMMA carriers either by the physical adsorption or by the covalent bonding. A slight improvement was observed for PS carriers with spacers compared to the carriers without them. The diffusion process of oligosaccharides in the porous carriers seemed to retard the rate of hydrolysis in the case of largest carriers, 60 μm PS-DVB-AA spheres. The activity of immobilized GluA was retained during a long storage period of more than 150 days, some of them even increasing gradually, while the activity of native GluA dropped to zero after 100 days. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65: 2655–2664, 1997     

Alkaline Corrosion Resistance of Anodized Aluminum Coated with Zirconium Oxide by a Sol-Gel Process

To improve the alkaline corrosion resistance of aluminum, composite films were prepared that consisted of a porous layer of anodically grown aluminum oxide filled with zirconium oxide, with a zirconium oxide coating layer that was deposited thereon via the sol—gel process, using a dip-coating technique. The alkaline corrosion resistance of these composite films was extremely improved when this coating layer was placed on an anodic oxide film. Comparisons of the composite film and conventional anodic oxide film showed that the alkaline corrosion resistance of the composite film was increased by a factor of 24–50. Because these composite films, which have high corrosion resistance, indicated a vibration phenomenon of voltage in the duration time curve of the electromotive force measurement, the composite film had a self-repairing action for alkaline corrosion.