In Situ Observation of Wear Process Before and During Scuffing in Sliding Contact

In this study, a direct observation of a point contact area was conducted to understand the scuffing phenomenon. The contact area was produced between a rotating sapphire disc and a stationary steel ball and it was lubricated using n-hexadecane. The image detected by a colour digital CCD camera, load, and friction were synchronously recorded by a computer during the test. It was found that wear debris produced in the contact area played an important role in the wear process, which includes running-in and scuffing. In the test, debris particles accumulated in the inlet zone, and some particles entered the contact area to cause abrasive wear of the ball surface, even in the light-load stages. During the running-in process, the abrasive wear by debris particles changed the conformity between the sliding surfaces. In the high-load stage, just before the occurrence of scuffing, the whole contact area was flattened at once. When scuffing occurred, the contact area suddenly expanded. The conformity of the contact area was dramatically changed during its expansion. The flattening of the whole contact area and dramatic expansion with changing the conformity seemed to play important roles in scuffing.     

Low-energy proton-induced defects in n/p InGaP solar cells

The effects of low-energy proton-induced degradation of photovoltaic properties and generation of deep-level defects in n⁺/p InGaP solar cells have been investigated. Energy-dependent effects included decreased solar cell efficiency and increase the carrier removal rate with decreasing proton energy. The spectral response depicts that the degradation is more at longer wavelengths with the increase of proton fluence. A new majority (hole) trap HP1 has been observed in low-energy proton irradiated p-InGaP at 0.90±0.05 eV above the valence band for the first time. The carrier removal rates were found to be 61433 and 8640 cm⁻¹ for 100 and 380-keV proton irradiation, respectively.     

Molecular recognitive photocatalytic decomposition on mesoporous silica coated TiO2 particle

Mesoporous silica coated titania exhibited a substrate selective photocatalytic reaction; 4-nonylphenol and phenol were decomposed while nonane was not decomposed by the UV irradiation to their aqueous mixture.     

950 keV, 3.95 MeV and 6 MeV X-band linacs for nondestructive evaluation and medicine

We are developing compact X-band linac X-ray sources for nondestructive evaluation and medicine. First, we develop a portable X-ray system by a 950 keV 9.4 GHz X-band linac to realize on-site inspection. We use a low power (250 kW) magnetron as an RF source for compactness of the whole system. Since the RF power source is quite small and the stored energy in the structure is also small, we faced the problem of beam loading and current/RF-power oscillation. We are analyzing the problem by the circuit model. We plan to use this system for erosion inspection of metal pipes of petrochemical complex. By adopting a side-coupling cavity design to avoid the oscillation, we have developed 6 MeV X-band (9.3 GHz) linac for pinpoint dynamic tracking cancer therapy. Furthermore, we are manufacturing 3.95 MeV X-band (9.3 GHz) linac X-ray source with flexible waveguides for on-site bridge inspection. Updated results and situations are presented.     

Observation of the intrinsic pinning of a magnetic domain wall in a ferromagnetic nanowire

The spin transfer torque is essential for electrical magnetization switching. When a magnetic domain wall is driven by an electric current through an adiabatic spin torque, the theory predicts a threshold current even for a perfect wire without any extrinsic pinning. The experimental confirmation of this 'intrinsic pinning', however, has long been missing. Here, we give evidence that this intrinsic pinning determines the threshold, and thus that the adiabatic spin torque dominates the domain wall motion in a perpendicularly magnetized Co/Ni nanowire. The intrinsic nature manifests itself both in the field-independent threshold current and in the presence of its minimum on tuning the wire width. The demonstrated domain wall motion purely due to the adiabatic spin torque will serve to achieve robust operation and low energy consumption in spintronic devices.     

Linked‐BINOL: An Approach towards Practical Asymmetric Multifunctional Catalysis

The development and application of a novel linked‐1,1′‐binaphthol (linked‐BINOL) as an approach towards practical asymmetric multifunctional catalysis is described. Linked‐BINOL was first designed to increase the stability of a Ga‐Li‐BINOL complex against ligand exchange with 4‐methoxyphenol. An oxygen‐containing linked‐BINOL, which is a semi crown ether, was effective in both promoting the formation of a monomer complex and increasing the stability of the Ga‐Li complex. A Ga‐Li‐linked‐BINOL complex promoted the epoxide opening reaction in up to 96% enantiomeric excess (ee). Second, based on the X‐ray structural information of the Ga‐Li‐linked‐BINOL complex, we designed a more stable lanthanide linked‐BINOL complex. An air‐stable, storable, and reusable La‐linked‐BINOL complex promoted the Michael reaction in up to >99% ee. The catalyst activity remained unchanged after storage under air for 4 weeks. Calculations suggested that the linked‐BINOL would function as a pentadentate ligand in a lanthanum complex, thus efficiently improving the stability of the complex. Finally, the linked‐BINOL was applied to a new homobimetallic multifunctional catalysis. A dinuclear Zn‐Zn‐linked‐BINOL complex promoted the enantio‐ and diastereoselective direct aldol reaction in up to 99% ee, where one Zn cation might function as a Lewis acid and the other Zn‐phenoxide as a Brønsted base.     

Silica films with a single-crystalline mesoporous structure

Films of mesoporous materials attract broad interest because of their wide applicability in the fields of optics and electronics. Although many of these films have a regular local porous structure, the structural regularity has not been used practically yet because of difficulties in its control on macroscopic scales. Here, we demonstrate the preparation of mesoporous silica films whose porous structure can be described as a single crystal, that is, a long-range order of cage-like pores is maintained over centimetre scales. These films have a three-dimensional hexagonal (space group P6(3)/mmc) porous structure, and the in-plane arrangement of the pores is strictly controlled by a polymeric substrate surface that has been treated by rubbing. This new class of single-crystalline films with mesoscopic periodic structure is a significant breakthrough in bottom-up nanotechnology, and could lead to novel devices, for example, optics in a soft X-ray region, and quantum electronics.     

Structures and electronic properties of surface/edges of nanodiamond and nanographite

The structure, electronic and magnetic properties of nanodiamond and nanographite/nanographene are investigated. Detonation nanodiamond particles that are covered with amorphous graphitic composites are hydrothermally treated to remove the graphitic surface composites and to terminate the surface carbon atoms with hydrogen. The number of localized spins of dangling bonds and the hydrogen concentration increase upon the increase in the hydrothermal treatment time up to 40 h. Above 40 h, both drop discontinuously, a surface structural reconstruction was suggested. The creation of dangling bonds and an incomplete hydrogenation of the surface carbon atoms destabilize the surface, resulting in the structural reconstruction. Nanodiamond particles are thermally converted to nanographite/nanographene. A single nanographene sheet is successfully prepared by heat-treating nanodiamond particles. The edge of graphene sheet with its edge carbon atoms being hydrogen-terminated is investigated by UHV-STM/STS. Zigzag edges are found to have non-bonding π-state of edge origin, in good agreement with theoretical prediction.     

Model predictive control with adaptive disturbance prediction and its application to fatty acid distillation column control

This paper describes the results of a joint university-industry study to control a fatty acid distillation sequence, which is plagued with severe disturbance problems. In order to solve the disturbance problem, a model predictive control algorithm is modified in terms of disturbance prediction. Assuming that the dynamics of the unmeasured disturbances is generated by an auto-regressive form, the dynamics of the disturbance can be adaptively identified by using time series data of prediction errors and inputs. Using an identified disturbance model with a process model, future outputs are predicted. Control actions are determined so that the predicted output is as close to the target value as possible. This modified model predictive control aglorithm is applied to a ratio control scheme for three distillation columns. The control system developed has been in use sucessfully for more than six years to produce commercial products.     

EM574, an erythromycin derivative, is a potent motilin receptor agonist in human gastric antrum

Erythromycin and its derivatives are known to induce phase III-like contractions, which are similar to those induced by motilin, in the human gastrointestinal tract during the interdigestive state, but few detailed in vitro studies have been reported. We evaluated EM574, an erythromycin derivative, as a motilin receptor agonist in the human gastric antrum in vitro, using contraction studies of muscle strips and isolated myocytes, receptor binding assay and tissue section autoradiography. EM574 stimulated contractions of muscle strips in a concentration-dependent manner (10(-7)-10(-5) M), and this contractile effect was unaffected by pretreatment with atropine or tetrodotoxin. Isolated myocytes contracted in response to EM574 with a peak shortening at 10(-7) M, which was comparable to the response to motilin. EM574 displaced specifically 125I-motilin bound to smooth muscle homogenates with a Kd value of 7.8 x 10(-9) M, compared with 4.5 x 10(-9) M for motilin. Film autoradiograms showed that 125I-motilin-binding sites were localized in the muscle layers, and that the labeling disappeared in the presence of a 1000 times molar concentration of EM574. We conclude that EM574 directly stimulates smooth muscle cell contraction by acting on motilin receptors in the human gastric antrum in vitro.