Fatty chain compositon of ether and ester glycerophospholipids in the Japanese oysterCrassostrea gigas (Thunberg)

The fatty chain compositions of 1-O-alk-1′-enyl-2-acyl, 1-0-alkyl-2-acyl, and 1,2-diacyl glycerophospholipids of the Japanese oysterCrassostrea gigas (Thunberg) were investigated. Major fatty chains in thesn-1 position of 1-alk-1′-enyl-2-acyl ethanolamine phospholipids (EPL) were 18∶0 (64.7%) and 20∶1 (11.1%). Majorsn-1 chains of alkenylacyl choline phospholipids (CPL) were 18∶0 (63.3%) and 16∶0 (22.2%). In the case of 1-alkyl-2-acyl EPL, the predominant fatty chains in thesn-1 position were 18∶0 (51.5%), 16∶0 (16.0%) and 20∶1 (12.5%); in the case of 1-alkyl-2-acyl CPL, the majorsn-1 chains were 16∶0 (44.0%) and 14∶0 (23.4%). Saturated fatty chains were predominant in both EPL and CPL. Prominent fatty acids in thesn-2 position of the alkenylacyl EPL were 22∶6n−3 (29.0%), 20∶5n−3 (19.0%) and 22∶2 NMID (non-methylene interrupted dienes, 16.6%) contributing to about 65% of the total fatty acids, while alkenylacyl CPL was rich in the saturated acids 16∶0 (32.0%) and 18∶0 (9.2%). In the alkylacyl EPL, 16∶0, 18∶1n−9, 18∶0 and 16∶1n−7 were prominentsn-2 fatty acids and accounted for 30.6%, 10.0%, 9.8%, and 8.3%, respectively. Polyunsaturated fatty acids were detected, but were present at extremely low percentages. Majorsn-2 fatty acids in alkylacyl CPL were 16∶0 (25.4%), 22∶6n−3 (16.0%) and 20∶5n−3 (8.4%). The major fatty acids of diacyl EPL were 20∶5n−3 (22.3%), 16∶0 (17.9%), and 18∶0 (16.1%), and those of diacyl CPL were 16∶0 (30.4%), 20∶5n−3 (17.6%) and 18∶1n−7 (7.4%).     

Effect of blending on liquefaction of coals

After solvent extraction of Taiheiyo, Miike and Balmer coals using wash oil under nitrogen atmosphere at 370 °C for 30 min, the extraction yield is always within the additivity law. Further studies used Yallourn, Soyakoishi, Taiheiyo, Horonai, Miike, Shin Yubari, Balmer coals and their blends which were hydrogenated in tetralin, wash oil or creosote oil, with or without catalyst, at 400–450 °C under 10 or 3 MPa of initial hydrogen pressure. When hydrogen is available, the additivity law exists for blended coals, but when the hydrogen supply is deficient, the experimental conversion of blended coals is always lower than calculated conversions. This may be due to the faster consumption of the hydrogen by more reactive coals and thus the less reactive coals were unable to react with hydrogen.     

Hydrocarbon chain distribution of ether phospholipids of the ascidianHalocynthia roretzi and the sea urchinStrongylocentrotus intermedius

The contents and compositions of the 1-O-alk-1′-enyl-2-acyl, 1-O-alkyl-2-acyl, and 1,2-diacyl glycerophospholipids in the muscle and viscera of the ascidianHalocynthia roretzi, and of the gonad of the sea urchinStrongylocentrotus intermedius, which are eaten to some extent in Alaska and in Asia, were analyzed by gas-liquid chromatography. 1-O-Alk-1′-enyl-2-acyl glycerophospholipids were found in all of the samples, accounting for 64.4–69.0% of the ethanolamine glycerophospholipid (EPL). By contrast, the levels of the 1-O-Alk-1′-enyl-2-acyl choline glycerophospholipids (CPL) were low (3.1–5.7%). CPL was rich in the 1-O-alkyl-2-acyl subclass amounting to 12.5–23.9% in the ascidian sample. The level of CPL in the sea urchin gonad was extremely high, amounting to 46.1%. The most prominent alkyl chains in thesn-1 position of CPL from the ascidian muscle were 16∶0 (44.6%), 18∶1 (26.5%), and 18∶0 (10.7%), and of CPL from the sea urchin gonad were 18∶0 (36.2%), 16∶0 (33.0%), and 18∶1 (17.8%). Unusually high levels of odd-numbered alkyl chains, e.g., 19∶0 andanteiso 17∶0, were detected in the CPL of all samples. The prominent alkenyl chains of EPL were 18∶0 (69.4%), 16∶0 (10.0%), and 18∶1 (8.54%) (not counting the vinyl double bond) for the sea urchin gonad. Relatively high levels of 20∶1 alkenyl chains were also present. The glycerolsn-2 positions contained high proportions of polyunsaturated fatty acids. Thus, 20∶5n-3 (43.6%) and 22∶6n-3 (20.1%) were most abundant in the alkylacyl CPL from the ascidian muscle and 20∶5n-3 (54.9%) and 20∶4n-6 (30.1%) in alkylacyl CPL from the sea urchin gonad. Despite a possible interconversion of the alkyl and alkenyl chains of each class of the ether phospholipids, they showed few features in common.     

Transient current mapping obtained from silicon photodiodes using focused ion microbeams with several hundreds of MeV

Single Event Effects (SEEs) triggered by energetic heavy ions traversing a sensitive parts of electric devices have been studied using high-energy heavy ion microbeams connected with Transient Ion Beam Induced Current (TIBIC) measuring system at the Japan Atomic Energy Agency (JAEA) Takasaki Ion Accelerators for Advanced Radiation Applications (TIARA) facility. In the TIBIC system, SEE for semiconductor device, that is fast charge collection, has been observed in timescales of the order of picoseconds. In this paper, we show successful demonstration of the performance of the system, in which clear images of TIBIC map have been observed for Si pin photodiodes irradiated by 260 MeV ²⁰Ne⁷⁺ and also by 520 MeV ⁴⁰Ar¹⁴⁺ microbeams.     

A novel spherical carbon

We developed a novel spherical carbon material. The spherical carbon is composed of a high density of carbon nanotubes or nanofilaments, and includes an oxidized diamond particle as a core. Syntheses of this carbon in high volume with high selectivity may be possible. It is expected that this carbon will be useful as a catalyst material for fuel cells, electric double-layer capacitors, etc.     

Electrochemical analysis of perpendicular mesoporous Pt electrode filled with pure water for clarifying the active region in fuel cell catalyst layers

A perpendicular mesoporous platinum film is used as a model electrode to clarify the effectiveness of catalysts inside agglomerates of fuel cell catalyst layers on the basis of experimental facts. The analysis clarifies that: (i) Pt surface even apart from Nafion ionomer phase can be electrochemically active; (ii) its response is different from that of the surface covered with ionomer; and (iii) ionic resistance in pores filled with pure water is too high (ca. 0.18 MΩ cm) for fuel cell reactions to smoothly occur. We conclude that such catalysts in pores filled with pure water are ineffective for fuel cell reactions due to the high ionic resistance, though their catalytic activity is possibly higher than that of the catalysts covered with Nafion.     

Space charge field effect on light emitting from tetracene field-effect transistor under AC electric field

By applying square wave AC voltage to the Au source electrode of tetracene based field-effect transistor (FET), electroluminescence (EL) was obtained. The results suggest that electrons and holes were injected alternately from the source electrode and recombined each other, and lead to the EL. This type of EL was localized at the interface between the source electrode and tetracene, and enhanced periodically with two relaxation times in accordance with the applied AC voltage cycle. We modeled the carrier behavior in the FET and explained the decay of EL, taking into account the space charge field contribution. Finally, using an AC voltage superposed on DC bias voltage, it was shown that electron injection was prompted only by space charge field.     

Effects of extraction solvents,cooking procedures and storage conditions on the contents of ergothioneine and phenolic compounds and antioxidative capacity of the cultivated mushroom Flammulina velutipes

Edible mushrooms contain considerable amounts of the potent natural antioxidant 2‐thiol‐l ‐histidine‐betaine (l ‐ergothioneine, ESH). The objective of this study was to evaluate the effects of extraction solvents, common cooking methods and storage conditions on the ESH content, total phenols (TPs) and antioxidant capacity of the edible mushroom Flammulina velutipes fruiting body and its hot water extract that had been stored at different temperatures. Regarding cooking procedures, boiling in water resulted in the highest losses of antioxidant activity of both ESH and TPs. Most of the losses of ESH and TPs were detected in the cooking water. The ESH contents in the raw mushroom fruiting bodies significantly decreased after 8 days of refrigerated storage under both dark and fluorescent lighting conditions. However, the TP content in the raw mushroom stored under fluorescent lighting significantly increased during 10 days of refrigeration. In contrast, the ESH and TP contents as well as DPPH radical scavenging ability of the fruiting bodies remained unchanged for up to 15 days of frozen storage at ?18 °C. The same behaviour was obtained with the mushroom extract packed in plastic tubes. The correlation between DPPH radical scavenging activity and ESH contents was higher than that for TP compounds.     

Parity induced edge-current saturation and current distribution in zigzag-edged graphene nano-ribbon devices

We show computationally that the current-voltage characteristics of the zigzag-edged graphene nanoribbon (ZGNR) with the even width exhibit remarkable current saturation behavior in spite of the absence of the bandgap. Mechanism of such current-saturation behavior can be understood to be originated from the symmetries of the wavefunctions corresponding to the edge states in ZGNR. We further demonstrate that the current-voltage characteristics of ZGNR can be drastically changed even by the presence of a single lattice vacancy, with the strong dependence on the position of the vacancy. The origin of such properties is intuitively understood by analyzing the transmission probabilities through such systems.     

Proposal of Design Criteria for Gas Entrainment from Vortex Dimples Based on a Computational Fluid Dynamics Method

Design criteria for gas entrainments (GE) from the liquid surface in a fast breeder reactor system were proposed in this paper for the two types of GE phenomena from a vortex dimple based on a computational fluid dynamics (CFD) method. The first gas entrainment phenomenon is a gas core extension directly to the outlet piping level, which induces large amount of GE to the flow system. The second is continuous bubble detachments from the tip of the vortex dimple. Based on CFD calculations for elemental experiments of the surface vortex, local CFD non-dimensional numbers were defined as the design criteria to prevent GE. In conclusion, it was found that the CFD non-dimensional numbers are useful for the design parameters of GE prevention.