Investigation of electron trapping behavior in n-channel organic thin-film transistors with ultrathin polymer passivation on SiO2 gate insulator

Electron trapping behavior at the interface between N,N′-ditridecyl-3,4,9,10-perylene tetracarboxylic diimide (PTCDI-C13) film and thermal SiO₂ was investigated by utilizing ultrathin poly(methyl methacrylate) (PMMA) gate passivation layers. From the capacitance–voltage analysis for the PTCDI-C13/PMMA/SiO₂ interface, it is found that the electron tunneling appeared with PMMA thinner than 0.8 nm, and that the thickness of the gate passivation layer should be at least 1 nm for preventing injection-type hysteresis in the capacitance–voltage curve. The effective electron mobility of organic thin-film transistors (OTFTs) based on PTCDI-C13 with SiO₂ gate insulator was increased by suppressing shallow-level interface traps on SiO₂ with the PMMA layer, which can be partially accounted for by the multiple trap and release model. In this work, the thickness and the density of the PMMA layers were precisely controlled with a simple spin-coating process. Even 1.3-nm thick PMMA layer caused the improvements of the electron mobility and the air stability of the n-channel conduction.     

Electrochemical oxidation of chlorophenols at a boron-doped diamond electrode and their determination by high-performance liquid chromatography with amperometric detection

Anodically pretreated diamond electrodes have been used for the detection of chlorophenols (CPs) in environmental water samples after high-performance liquid chromatographic (HPLC) separation. The anodization of as-deposited boron-doped polycrystalline diamond thin-film electrodes has enabled the stable determination of phenols over a wide concentration range. Prior to the HPLC analysis, a comparative study with ordinary glassy carbon, as-deposited diamond, and anodized diamond was made to examine the oxidative behavior of phenols by cyclic voltammety and flow injection analysis with amperometric detection. At anodized diamond electrodes, reproducible, well-defined cyclic voltammograms were obtained even at high CP concentration (5 mM), due to a low proclivity for adsorption of the oxidation products on the surface. In addition, after prolonged use, the partially deactivated diamond could be reactivated on line by applying a highly anodic potential (2.64 Vvs SCE) for 4 min, which enabled the destruction of the electrodeposited polymer deposits. Hydroxyl radicals produced by the high applied potential, in which oxygen evolution occurs, are believed to be responsible for the oxidation of the passivating layer on the surface. When coupled with flow injection analysis (FIA), anodized diamond exhibited excellent stability, with a response variability of 2.3% (n = 100), for the oxidation of a high concentration (5 mM) of chlorophenol. In contrast, glassy carbon exhibited a response variability of 39.1%. After 100 injections, the relative peak intensity, for diamond decreased by 10%, while a drastic decrease of 70% was observed for glassy carbon. The detection limit obtained in the FIA mode for 2,4-dichlorophenol was found to be 20 nM (S/N = 3), with a linear dynamic range up to 100 microM. By coupling with the column-switching technique, which enabled on-line preconcentration (50 times), the detection limit was lowered to 0.4 nM (S/N = 3). By use of this technique, anodized diamond electrodes were demonstrated for the analysis of CPs in drainwater that was condensed from the flue gas of waste incinerators.     

The history of ceramic filters

The history of ceramic filters is surveyed. Included is the history of piezoelectric ceramics. Ceramic filters were developed using technology similar to that of quartz crystal and electro-mechanical filters. However, the key to this development involved the theoretical analysis of vibration modes and material improvements of piezoelectric ceramics. The primary application of ceramic filters has been for consumer-market use. Accordingly, a major emphasis has involved mass production technology, leading to low-priced devices. A typical ceramic filter includes monolithic resonators and capacitors packaged in unique configurations.     

A scenario-driven conceptual design information model and its formation

This study describes a scenario-driven conceptual design information model and its formation from the viewpoint of the designers cognition, which is a fundamental part of practical design support tools. Four design meetings were observed in a company, at intervals of several weeks, in order to derive the model. The model consists of information elements generated through the cognitive design problem-solving process, which is a basic design process defined in this study. The study describes the relationship among these information elements, which illustrate the design information model and its formation. The model described in this study is based on scenarios, which promote the evolution of product design. Examples of designers discourse in the design meetings are presented to validate the model.     

Trace gas measurement with an integrated porous tube collector/long-path absorbance detector

Porous membrane tubes filled with an absorbing solution that change colors upon selective reactions with specific gases provide high sensitivity inexpensive gas sensors. These can be routinely used for ambient monitoring in a fully automated manner. We consider both stopped and continuous flow operations and show the superiority of the stopped flow mode theoretically and experimentally. Light throughput through various membrane tubes is presented, and superior performance of such tubes over Teflon AF is shown. Sensors for NO2 and for O3 were based on Griess-Saltzman and indigotrisulfonate chemistries, respectively. A computer-controlled two-LED absorbance measurement system (one wavelength monitors the signal, the other references the system) that also governs automated reagent refilling was implemented. Sub-parts-per-billion-volume detection limits are attainable within a few minutes for both gases. Comparative data with a commercial UV-photometry-based ozone monitor showed excellent agreement with the response pattern of the present instrument. Low cost, ready applicability to the measurement of different gases by merely changing the light source and chemistry, and high sensitivity makes this instrument attractive for both pedagogic and practical purposes.     

Cautionary observations on preparing and interpreting brain images using molecular biology-based staining techniques

Though molecular biology-based visualization techniques such as antibody staining, in situ hybridization, and induction of reporter gene expression have become routine procedures for analyzing the structures of the brain, precautions to prevent misinterpretation have not always been taken when preparing and interpreting images. For example, sigmoidal development of the chemical processes in staining might exaggerate the specificity of a label. Or, adjustment of exposure for bright fluorescent signals might result in overlooking weak signals. Furthermore, documentation of a staining pattern is affected easily by recognized organized features in the image while other parts interpreted as "disorganized" may be ignored or discounted. Also, a higher intensity of a label per cell can often be confused with a higher percentage of labeled cells among a population. The quality, and hence interpretability, of the three-dimensional reconstruction with confocal microscopy can be affected by the attenuation of fluorescence during the scan, the refraction between the immersion and mounting media, and the choice of the reconstruction algorithm. Additionally, visualization of neurons with the induced expression of reporter genes can suffer because of the low specificity and low ubiquity of the expression drivers. The morphology and even the number of labeled cells can differ considerably depending on the reporters and antibodies used for detection. These aspects might affect the reliability of the experiments that involves induced expression of effector genes to perturb cellular functions. Examples of these potential pitfalls are discussed here using staining of Drosophila brain.     

22–29 GHz Ultra-Wideband CMOS Pulse Generator for Short-Range Radar Applications

The pseudo-millimeter-wave ultra-wideband (UWB) is attractive for applications in short-range automotive radar systems using 22 to 29 GHz in order to realize road safety and intelligent transportation. Although the CMOS is suitable for short- range radar since processing units can be implemented in the same chip as the UWB front-end building block, it is difficult to operate CMOS pulse generators at such a high frequency. To realize the pseudo-millimeter-wave band using CMOS, we have proposed a new pulse generator consisting of a series of delay cells and edge combiners with waveform shaping for short-range radar. As a result of measurement using 90-nm CMOS technology, 1 Gb/s/bit pulses with 71 mV peak-to-peak, 39.2 ps monopulse width and 552 ps envelope width are successfully generated with a power consumption of 1.4 mW at a supply voltage of 0.91 V. This result can be the basis for developing the key technology for one-chip short-range radar sensors.     

BAAQ: an infrastructure for application integration and knowledge discovery in bioinformatics.

The emerging grid computing technologies enable bioinformatics scientists to conduct their researches in a virtual laboratory, in which they share public databases, computational tools as well as their analysis workflows. However, the development of grid applications is still a nightmare for general bioinformatics scientists, due to the lack of grid programming environments, standards and high-level services. Here, we present a system, which we named Bioinformatics: Ask Any Questions (BAAQ), to automate this development procedure as much as possible. BAAQ allows scientists to store and manage remote biological data and programs, to build analysis workflows that integrate these resources seamlessly, and to discover knowledge from available resources. This paper addresses two issues in building grid applications in bioinformatics: how to smoothly compose an analysis workflow using heterogeneous resources and how to efficiently discover and re-use available resources in the grid community. Correspondingly an intelligent grid programming environment and an active solution recommendation service are proposed. Finally, we present a case study applying BAAQ to a bioinformatics problem.     

Polymer structure formed in radiation-induced graft polymerization

Methacrylic acid (MAA) and methyl methacrylate (MMA) were grafted onto nylon 6, cellulose triacetate, cotton, viscose rayon, and polyester fibers, and the stereoregularities of the grafted polymers were determined. The graft polymerization was carried out with preirradiation techniques using γ-rays from a Co 60 source. The grafted copolymers were then separated from the homopolymers by Soxhlet extraction. The grafted (branch) polymers were isolated from the trunk polymers by acid hydrolysis and their stereoregularity was determined with a 100 MHz NMR spectrometer. The stereo-regularity of PMAA or PMMA grafted onto viscose rayon or cotton fiber was different from that of the polymers formed in ordinary radical polymerization.     

Moiré‐reduction methods for integral videography autostereoscopic display with color‐filter LCD

Abstract— Moiré‐reduction methods for integral videography displays are proposed. Integral videography is based on the principles of integral photography and extended real‐time video processing. There are two moiré‐reduction methods that can be used for integral videography displays that have a lens array and a liquid‐crystal display. The first is color moiré, and the second is intensity moiré. To reduce color moiré, an optimized color‐filter layout in the liquid‐crystal display was used. To reduce intensity moiré, a defocusing method was used. Adesign of a viewing area for the integral videography display is also presented. To control the viewing area, the lens pitch and the shape of the integral videography elemental image was changed. A 5‐in. integral videography display was implemented by using the proposed methods, and an integral videography display was evaluated.