A low-carbon scenario creation method for a local-scale economy and its application in Kyoto city

On May 2008, Kyoto city government set up a low-carbon target of a 50% GHG reduction by 2030 compared to the 1990 level. To contribute to these discussions, we developed a local (city-scale) low-carbon scenario creation method. An estimation model was developed to show a quantitative and consistent future snapshot. The model can explicitly treat the uncertainty of future socio-economic situations, which originate from the openness of local economy. The method was applied to Kyoto city, and countermeasures to achieve the low-carbon target were identified. Without countermeasures, emissions would increase 12% from 2000. Among the measures, the reduction potential of energy efficiency improvements to residential and commercial sectors was found to be relatively large (15% and 18% of total reductions, respectively). The reduction potential of the passenger transport sector, in which the city government's policy is especially important, was 17% of the total amount. A sensitivity analysis showed that a 10% increase in exports leads to an 8.5% increase in CO₂ emissions, and a 20% increase in the share of the commuters from outside the city leads to a 3.5% decrease of CO₂ emissions because of the smaller number of residents in the city.     

Characterisation of volatile sulphur-containing compounds generated in crushed leaves of Chinese chive (Allium tuberosum Rottler)

To characterise the composition of sulphur-containing constituents in Chinese chive (Allium tuberosum Rottler), GC–MS and HPLC analyses were carried out, using 12 varieties of Chinese origin, 4 varieties of Japanese origin and 6 commercially available cultivars. Five disulphides (dimethyl, allyl methyl, methyl 1-(E)-propenyl, diallyl, and allyl 1-(E)-propenyl), two trisulphides (dimethyl and allyl methyl), and two vinyldithiins (3-vinyl-[4H]-1,2- and 2-vinyl-[4H]-1,3-) were identified on the basis of their mass spectral and GC-retention data. Among the detected sulphur compounds, sulphides with a methyl group predominated over those with an allyl group. This was supported by the HPLC estimations, suggesting that all cultivars examined had much greater amounts of methiin than alliin. Also, two novel compounds were tentatively identified as [3H,4H]-1,2-dithiin and [2H,4H]-1,3-dithiin on the basis of their mass spectral features, GC-retention data, and some experimental results on their formation in reaction mixtures with different proportions of methiin and alliin. Their formation mechanism was proposed.     

Feasibility of zeolites in converting butyric acid into propylene for biorefineries

The biorefinery has been recognized as a new industry to produce both energy and chemical materials such as olefins and BTX from renewable resources. In this context the conversion of butyric acid over zeolites was investigated for establishing a new production route of propylene. Propylene was mainly generated by decarbonylation and dehydration of butyric acid. Our study proved that H-ZSM-5 (750) and silicalite were the best industrial catalyst among the tested ones. For H-ZSM-5 (750), the selectivity of propylene reached 64.2 C% and the ratio of the yield for propylene to theoretical yield (75 C%) became 85.6%.     

Immunochromatography for the rapid determination of cadmium concentrations in wheat grain and eggplant

BACKGROUND: A simple and quick on‐site test for trace levels of cadmium (Cd) in food is needed because of the human toxicity of this heavy metal. We developed an immunochromatography kit which uses the antigen‐antibody complex reaction between the Cd–ethylenediaminetetraacetic acid (Cd–EDTA) complex and an anti‐Cd–EDTA antibody. We previously reported the successful use of this kit to determine Cd concentrations in brown rice with respect to the international standard: 0.4 mg kg^?1. Here, we measured, using this immunochromatography kit, Cd concentrations in crops with lower international standards than rice. RESULTS: Cadmium extracted with 0.1 mol L^?1 HCl from wheat grain and fresh eggplant was purified sufficiently using an ion‐exchange column treatment. Appropriate HCl extraction rates and dilution rates for the column eluate were selected; Cd concentrations in wheat grain and fresh eggplant were determined successfully by immunochromatography with respect to the international standards of 0.2 mg kg^?1 and 0.05 mg kg^?1 fresh weight, respectively. CONCLUSION: Approximate Cd concentrations in wheat grain and fresh eggplant can be monitored easily and quickly by this method at locations where facilities for acid digestion and precision analysis are not available. Copyright © 2011 Society of Chemical Industry     

Field instrument for simultaneous large dynamic range measurement of atmospheric hydrogen sulfide, methanethiol, and sulfur dioxide

We describe a membrane-based collection/analysis system that differentially monitors H2S and CH3SH, and to which a conductometric SO2 analyzer using the same collector was coupled. A diffusion scrubber (DS) comprised of a Nafion tube collects H2S selectively while a porous polytetrafluoroethylene (pPTFE) DS collects both H2S and CH3SH. Both gases are measured via their ability to react with fluorescein mercuric acetate (FMA) which results in decreased fluorescence. The limited dynamic range of a negative signal procedure was overcome by using dual DS units comprised of short and long scrubbers, placed serially in the liquid flow line. Different DS designs and membrane materials were investigated. H2S, CH3SH, and SO2 from a biogenic point source were continuously measured, and the H2S/CH3SH data compared well with a standard procedure involving Tedlar bag collection, preconcentration and thermal desorption from a Tenax trap, and measurement by gas chromatography/flame photometric detection. Walkaround portability of the instrument and very large dynamic range measurement of H2S and SO2 were demonstrated around the Mt. Aso volcano.