A 99-mm2 0.7-W single-chip MPEG-2 422P@ML video, audio,and system encoder with a 64-Mb embedded DRAM for portable 422P@HLencoder system

A scalable single-chip 422P@ML MPEG-2 video, audio, and system encoder LSI for portable 422P@HL system is described. The encoder LSI is implemented using 0.13-μm embedded DRAM technology. It integrates 3-M logic gates and 64-Mb DRAM in an area of 99-mm². The power consumption is suppressed to 0.7 W by adopting a low-power DRAM core. It performs real-time 422P@ML video encoding, audio encoding, and system encoding with no external DRAM. Furthermore, the encoder LSI realizes a 422P@HL video encoder with multichip configuration, due to its scalable architecture. This results in a PC-card size 422P@HL encoder for portable HDTV codec system     

Dependence of the efficiency-bandwidth product on electrical volumeof small dielectric loaded antennas

The efficiency fractional efficiency bandwidth product (EB) that is expressed as a ratio of the radiation resistance to the absolute value of an input reactance of an antenna is used as a performance measure for small dielectric-loaded monopole antennas (DLMAs). The dependence of the efficiency bandwidth (EB) on the permittivity of the dielectric loading (i.e., the electrical volume) is experimentally investigated for the first time after we succeeded in measuring the small radiation resistance of the DLMAs precisely on the basis of the Wheeler cap method. As a result, it was found that the EBs of some DLMAs were enhanced over a bare monopole antenna and an EB characteristic curve has a maximum point. This result suggests the presence of the optimum electrical volume for the dielectric loading in order to obtain the best EB performance. A calculation by the finite-difference time-domain (FDTD) method was also conducted to confirm the presence of the maximum EB value under a certain condition. A general reason for the existence of the peak value is also explained using a mathematical deduction     

High-bandwidth graded-index polymer optical fiber with high-temperature stability

A newly developed graded-index polymer optical fiber (GI-POF) with high-temperature and high-humidity stability was proposed. As it was found that the high numerical aperture and high glass transition temperature (T/sub g/) at the core center of the GI-POF were key issues to achieve both high-temperature and humidity stability, a partially fluorinated polymer material was adopted to obtain both characteristics in the GI-POF. The newly developed GI-POF had low-loss (140 dB/km at 650-nm wavelength), high-bandwidth (higher than 1 GHz for 100 m transmission), high-temperature and humidity stability at 70/spl deg/C, 80% relative humidity (R.H.) and low bending loss.     

Synthesis of hardware models in C with pointers and complex datastructures

One of the greatest challenges in a C/C++-based design methodology is efficiently mapping C/C++ models into hardware. Many networking and multimedia applications implemented in hardware or mixed hardware/software systems now use complex data structures stored in multiple memories, so many C/C++ features that were originally designed for software applications are now making their way into hardware. Such features include dynamic memory allocation and pointers for managing data. We present a solution for efficiently mapping arbitrary C code with pointers and malloc/free into hardware. Our solution, which fits current memory management methodologies, instantiates an application-specific hardware memory allocator coupled with a memory architecture. Our work also supports the resolution of pointers without restriction on the data structures. We present an implementation based on the SUIF framework along with case studies such as the realization of a video filter and an ATM segmentation engine     

Photonic transport network OAM technologies

The optical path concept was proposed to realize ubiquitous B-ISDN. It can make quantum leaps in both transmission capacity and cross-connect throughput simultaneously by exploiting WDM (wavelength division multiplexing) transmission and the wavelength routing capabilities of paths. Since the optical path is a new concept, new operation and management (OAM) systems and related technologies need to be developed before it can be fully utilized. This article discusses some of the key OAM-related issues and identifies the technical points necessary for future developments. The issues include optical path realization technologies, optical path accommodation design problems, a newly proposed optical transport network layer architecture, and the optical transport module for the network node interface     

A real-time motion estimation and compensation LSI with wide searchrange for MPEG2 video encoding

This paper presents a motion estimation and compensation large scale integration (LSI) for the MPEG2 standard. An embedded RISC processor and special hardware modules enable the LSI to achieve a sufficient ability to perform real-time operation and provide the availability to realize many kinds of block matching algorithms. Using a three-step hierarchical telescopic search algorithm, a single chip accomplishes real-time motion estimation with search ranges of ±32.5×±32.5 pixels for motion vectors. The chip was fabricated using 0.5-μm CMOS technology and has an area of 16.5×16.5 mm² and 2.0 M transistors     

A new generation of modems for power efficient radio systems

A new class of generalized intersymbol-interference and jitter-free (GIJF) modulated signals is introduced. Computer simulation and hardware experimental research results demonstrate that our proposed new generation of signals and modulators leads to significant performance improvements in non-linearly amplified broadband radio systems. For increased power efficiency, non-linear amplification is required in most commercial satellite and terrestrial microwave systems. In particular, we demonstrate that the 3 dB envelope fluctuation of currently used offset raised-cosine overlapped QPSK systems is reduced to 0-5 dB, and that the BER performance is improved by approximately 1 dB. These significant technical performance advantages are expected to lead to more economical implementations of digital transmission systems.     

Virtual path and link capacity design for ATM networks

A path and link capacity design method for asynchronous transfer mode (ATM) networks using statistical multiplexing of cells is proposed. By developing the design method, the statistical cell multiplexing effect can be exploited to significantly reduce required network resources. The necessary design procedures are identified. A simple and effective policing mechanism is proposed. An analytical method for the evaluation of cell multiplexing characteristics using declared parameters is provided. Path and link capacity design algorithms that use these techniques are proposed. The effectiveness of the proposed design procedure is confirmed by comparing analytical results to those from a computer simulation     

Application of finite-element method to H-plane waveguide discontinuities

The finite-element method has been applied to the scattering by an inhomogeneous H-plane discontinuity of arbitrary shape in a rectangular waveguide. As an example of the method, a right-angle corner bend and a waveguide-type dielectric filter are considered. Our results agree well with earlier theoretical and experimental results.     

Germanium-oxide glass optical fibre prepared by VAD method

Germanium-oxide glass optical fibre doped with antimony for transmission of the 2 to 3 ?m band has been prepared by the vapour-phase axial deposition (VAD) method. An attenuation loss of 13 dB/km at 2.05 ?m and 70 dB/km at 2.4 ?m has been achieved.