In situ measurement of lithium mass transfer during charging and discharging of a Ni–Sn alloy electrode

The charging (lithiation) and discharging (delithiation) of a Ni–Sn alloy electrode was examined by means of holographic interferometry and laser scanning confocal microscopy (LSCM). The developing concentration profile of Li⁺ ion during discharging (delithiation) of the Ni–Sn alloy electrode agreed reasonably well with the prediction based on transient diffusion theory, indicating that the cell configuration successfully suppressed natural convection due to the electrochemical reaction. The morphological variation of Ni–Sn alloy electrode during charge/discharge cycle could be observed very clearly by in situ LSCM. It was found that the contraction of active material during the discharge (delithiation) initiates cracks in the Ni–Sn alloy electrode.     

Pressure-drop reduction and heat-transfer deterioration of slush nitrogen in horizontal pipe flow

Cryogenic slush fluids such as slush hydrogen and slush nitrogen are two-phase, single-component fluids containing solid particles in a liquid. Since their density and refrigerant capacity are greater than those of liquid-state fluid alone, there are high expectations for the use of slush fluids in various applications such as clean-energy fuels, spacecraft fuels for improved efficiency in transportation and storage, and as refrigerants for high-temperature superconducting equipment. Experimental tests were performed using slush nitrogen to obtain the flow and heat-transfer characteristics in two different types of horizontal circular pipes with inner diameters of 10 and 15 mm. One of the primary objectives for the study was to investigate the effect of pipe diameter on the pressure-drop reduction and heat-transfer deterioration of slush nitrogen according to changes in the pipe flow velocity, solid fraction and heat flux. In the case of an inner diameter of 15 mm, pressure drop was reduced and heat-transfer characteristics deteriorated when the pipe flow velocity was higher than 3.6 m/s. On the other hand, in the case of an inner diameter of 10 mm, pressure drop was reduced and heat-transfer characteristics deteriorated when the pipe flow velocity was higher than 2.0 m/s. From these results, it can be seen that a larger pipe diameter produces a higher onset velocity for reducing pressure drop and deteriorating heat-transfer characteristics. Furthermore, based on observations using a high-speed video camera, it was confirmed that pressure drop was reduced and heat-transfer characteristics deteriorated when the solid particles migrated to the center of the pipe and the flow pattern of the solid particles inside the pipe was pseudo-homogeneous.     

Experimental and numerical analysis of channel-length-dependent electrical properties in bottom-gate,bottom-contact organic thin-film transistors with Schottky contact

Channel length dependence of field-effect mobility and source/drain parasitic resistance in pentacene thin-film transistors with a bottom-gate, bottom-contact configuration was investigated. Schottky barrier effect such as nonlinear behaviors in transistor output characteristics appeared and became more prominent for shorter channel length less than 10 μm, raising some concerns for a simple utilization of conventional parameter extraction methods. Therefore the gate-voltage-dependent hole mobility and the source/drain parasitic resistance in the pentacene transistors were evaluated with the aid of device simulation accounting for Schottky contact with a thermionic field emission model. The hole mobility in the channel region shows smaller values with shorter channel length even after removing the influence of Schottky barrier, suggesting that some disordered semiconductor layers with low carrier mobility exist near the contact electrode. This experimental data analysis with the simulation enables us to discuss and understand in detail the operation mechanism of bottom-gate, bottom-contact transistors by considering properly each process of charge carrier injection, carrier flow near the contact region, and actual channel transport.     

Numerical simulation of fracture of model Al-Si alloys

Hypoeutectic Al-Si alloys consist of primary α-Al and Al-Si eutectic phases and show typical elasticplastic fracture. To understand their fracture behavior, fracture processes were simulated using an elastic-plastic finite-element method. The validity of the J-integral-based criterion was verified and applied to the simulations. A complicated model was used to simulate the fracture in an idealized dendritic microstructure, and four simplified models were intended to more clearly understand the interaction between a crack and individual α phases. Results show that the crack is attracted to the soft α phase when passing by the α phase, whereas it is repelled when the α phase is close in front of or behind the crack tip. The presence of α phase close in front of or behind the crack tip leads to an amplification of the driving force. However, the α phase beside the tip reduces the driving force. Furthermore, the fracture behavior is mainly affected by the adjacent α phase on one side around the crack tip, while the remote α phase on the opposite side has an offsetting effect. The local stress-strain fields were examined to analyze the simulated behavior. The simulated crack-growth path in the dendritic model was compared and verified with the experimentally observed path.     

Thermodynamics of antimony,arsenic, and tin in CaO—CaF2 melts

In view of the importance of tramp element contamination of steel products through a large volume of scrap consumption in the near future, the thermodynamic behaviour of Sb, As, Sn and Cu in CaO—CaF₂ melts under reducing conditions was studied by examining the dependences of distribution of each element between Cu, Ag or Sn alloys and CaO—CaF₂ melts on the CaO activity, oxygen partial pressure and temperature around 1 500°C. As a result, the reaction products on treatment by Ca compounds were demonstrated to be Ca₃Sb₂, Ca₃As₂, Ca₂Sn and CaCu. Experimentally obtained distributions were extrapolated to lower oxygen partial pressures less than 10^?18 atm to estimate the feasibility of removing those tramp elements from molten iron. It is thermodynamically indicated that if the prevailing oxygen partial pressure of the environment is below 10^?23 atm, these impurities, except Cu, would be substantially removed from molten steel.     

Inhibition by angiotensin II type 1 receptor antagonist of cardiac phenotypic modulation after myocardial infarction

The purpose of this study was to examine the cardiac phenotype and remodeling after myocardial infarction and the effect of the angiotensin II type 1 (AT1) receptor antagonist (TCV-116) on the gene expression. Myocardial infarction in rats was produced by ligation of the coronary artery. TCV-116 (10 mg/kg/day) was administered orally to rats from 1 day after myocardial infarction. At 1, 2 and 3 weeks after myocardial infarction, blood pressure and heart rate were measured, and the heart was removed. The left ventricle was measured for infarct size and weight, and then the total RNA from the non-ischemic left ventricle was extracted. mRNAs in the non-ischemic left ventricle were measured by Northern blot analysis. The weight of the non-ischemic left ventricle was significantly increased 3 weeks after infarction. This was completely prevented by TCV-116 treatment. mRNA levels for beta-myosin heavy chain (beta-MHC), atrial natriuretic polypeptide (ANP), collagen types I and III and transforming growth factor-beta 1 (TGF-beta 1) in the non-ischemic left ventricle were increased by a factor of 3.0, 6.7, 7.9, 4.0 and 1.4 (P < 0.01), respectively, 1 week after infarction. There was no increase in alpha-skeletal actin mRNA at 1 and 2 weeks, but it was increased by a factor of 2.9 (P < 0.05) at 3 weeks. On the other hand, there was no change in alpha-MHC mRNA during the 3 weeks. TCV-116 significantly suppressed the increased gene expression of beta-MHC and alpha-skeletal actin in the non-ischemic myocardium at all time points, and also suppressed the expression of ANP at 2 and 3 weeks. However, TCV-116 failed to inhibit the expression of collagen I and III mRNAs at 1 and 3 weeks. These results show that myocardial infarction causes a rapid shift of myocytes to fetal phenotype and a rapid activation of collagen genes in the non-ischemic myocardium. AT1 receptor may be responsible for the phenotypic modulation of myocytes following myocardial infarction.     

Aseismic evaluation for aging degradation of nuclear power plant components

The commercial operation of light water reactor plants in Japan already has a history of nearly 30 years. Since the beginning of the 1990s, studies have been conducted on aging degradation of nuclear power plants in Japan and abroad and, earlier in 1999, the domestic program of plant life management (PLM) was settled on. The program is based on the results of the PLM Study, which started in 1997. The purpose of the study was to develop the preventive maintenance program with an evaluation of aging degradation for maintaining the functions of plant component equipment. Taking account of the need for proper management of aging degradation, meanwhile, the technical evaluation of aseismic capability of aged plants is also considered to be important. Based on this concept, we evaluated the impact of assumed aging degradation on the aseismic capability of the plant facilities and structures covered by the PLM Study. In the aseismic evaluation, aging degradation modes selected in the PLM Study were divided into two categories—the one is including some degradation modes which impact on the aseismic capability of the facilities and structures should be taken into account, the other is including those whose impact might be ignored. Then the aging degradation modes composing the former one were quantitatively evaluated primarily based on the Technical Guidelines for Aseismic Design of Nuclear Power Plants (JEAG-4601) (NUREG/CR-6241, 1987). The result of the evaluation indicated that no aging degradation mode to be reflected in the maintenance program was extracted from the viewpoint of securing the aseismic capability of the plant components. However, establishment of rational evaluation methods for aging degradation, e.g. aseismic capability evaluation of thinned piping systems, was made a future technical subject.     

Primary plasmacytoma of the thyroid: a case report and comparative literature study between Western nations and Japan

A 52 year old man presented with primary thyroid plasmacytoma. The patient was initially followed up for thyroid dysfunction. The histological examination of the removed thyroid revealed a proliferation of mature and immature plasma cells indicative of plasmacytoma with Hashimoto's disease. After radiotherapy (40 Gy) to the neck following right hemi-thyroidectomy, the patient is currently alive and well 3 years after diagnosis without any evidence of tumor. The immunohistological examination of the removed thyroid showed monoclonality for immunoglobulin G-Kappa light chains. Sixty-six literature cases of primary thyroid plasmacytoma were reviewed and comparison of the clinical and histological characteristics between Japanese and Western cases noted. The incidence of the patients with antithyroid antibody was significantly lower (P < 0.01) in Western patients (42.9%) than in Japanese patients (87.5%). The higher incidence of thyroid dysfunction and Hashimoto's disease in Japan in comparison with Western nations was well reflected in the incidence of antithyroid antibody.     

A decentralized control system for stabilizing multimachine power systems

A decentralized control system is studied for stabilizing multimachine power systems. A longitudinal power system with three areas, each having one machine, is considered in this study. A decentralized control design method is proposed, which is based on the optimal regulator theory. First a centralized control system is designed without any consideration on whether state variables are all available or not. Second a pseudo-decentralized control system is designed by omitting control gains corresponding to state variables which give hardly any effects on the power system stability. It is found that only one variable of phase angle of each machine is absolutely necessary for the pseudo-decentralized control system. This leads to an idea based on power system engineering, that is to say, new variables of tieline power flow are introduced in the decentralized control system design to substitute for the phase angle of each machine. Thus a decentralized control system for power system stability can be designed using the new variables of tieline power flow. It is demonstrated from simulation studies that the decentralized control system improves even longitudinal power system stability as well as the centralized control system.