Loop current characteristics of a thyristor-controlled series capacitor

This paper presents the results of an investigation on the loop current of a thyristor-controlled series capacitor (TCSC). The knowledge of loop current characteristics is important for understanding analytically the equivalent impedance of TCSC, estimating harmonics produced by TCSC, and determining ratings of the TCSC circuit components. However, little has been written on the loop current of TCSC circuit. Therefore, using a laboratory-scale TCSC installed on a laboratory power system, the TCSC currents and voltages were measured and analyzed to investigate the behavior of loop current. A mathematical model of TCSC was also developed to compare to the experimental results and further clarify the relationship between loop current and steady-state impedance characteristics, including effects of TCSC circuit component size on the characteristics. Capacitor voltage harmonics and their impact on the power system were also investigated. ©1998 Scripta Technica, Electr Eng Jpn, 125(1): 37–46, 1998     

Robot vision robust to changes of lighting conditions using a wide-dynamic-range visual sensor

We have developed a robust vision system for 2D positioning of industrial parts stable to changes of lighting conditions. A wide dynamic range vision sensor that we had developed previously was used to avoid the saturation of object images. Additionally, a gray scale pattern matching technique was employed for robust image processing. Performance of the system with a wide dynamic range vision sensor was investigated experimentally in comparison with that of a system with a conventional video camera. The probability of correct positioning of an object under changing lighting conditions, simulating those in a factory, was 100% for the wide dynamic range vision sensor and 83% for the conventional video camera. The experimental results confirm the effectiveness of the developed system, revealing that dynamic range expansion of the video cameras is very effective for realizing robust robot vision systems. © 1997 Scripta Technica, Inc. Electr Eng Jpn, 120(2): 34–40, 1997     

The content of tocopherols and oxidative quality of oils prepared from sunflower (Helianthus annuus L.) seeds roasted in a microwave oven

Sunflower seeds ((Helianthus annuus were roasted for 6, 12, 20 or 30 min at a frequency of 2450 MHz using a domestic microwave oven. After the kernels were separated from the sunflower seeds, the quality characteristics and the compositions of the oils were investigated in relation to their tocopherol distributions, and they were further evaluated as compared with an unroasted oil sample. Only minor increases (p < 0.05) in chemical and physical changes of the oils, such as the carbonyl value, the p‐anisidine value and the color development, occurred at a prolonged roasting period. Significant decrease (p < 0.05) was observed in the amounts of phospholipids in the oils after microwave roasting. Nevertheless, compared to the original level, more than 92 wt‐% tocopherols still remained after 30 min of roasting. With a few exceptions, these results indicate that the exposure of sunflower seeds to microwaves for 12 min caused no significant (p < 0.05) loss or change in the content of tocopherols and polyunsaturated fatty acids in the kernels.     

Improving an immunoassay response to related polychlorinated biphenyl analytes by mixing antibodies

Immunoassays for detection of a class of closely related antigens, e.g., PCBs, have often been too specific (responding strongly to some members of the class and missing others) and no general method for adjusting the response has been described. In this paper, the difference in the response of a model immunoassay to different Kanechlors (Japanese commercial mixtures of PCBs, analogous to Aroclors in the United States) is reduced from 20- or 50-fold (depending on which antibody is used) to 3-fold when the antibodies are mixed at the proper ratio. A mathematical model based on competitive binding of two antibodies for up to four antigens has been developed and used to describe the assay performance and to predict optimum mix ratios for the antibodies used. The model (based on separate measurement of each antibody's effective Kd for each Kanechlor) provides an excellent fit to the measured mixed antibody assay response. The model is also successful in identifying cases where mixing monoclonal antibodies will not improve the response. It is thought the method described will have applicability in a variety of cases where the analytical goal is semiquantitative screening based on the total quantity of an unknown mixture of related compounds.     

Study on absorption/desorption characteristics of a metal hydride tank for boil-off gas from liquid hydrogen

We have been performing research on the Totalized Hydrogen Energy Utilization System (THEUS) which has applications to commercial buildings and a planned added function of supplying energy to stations for hydrogen and electric vehicles. In that case we will utilize liquid hydrogen transported from a hydrogen station and all Boil-Off Gas (BOG) will be recovered in THEUS’s metal hydride tanks. It is known that BOG is chiefly composed of para-hydrogen, which has different thermo-physical properties from normal hydrogen. It has been reported that some metal hydride alloys work as a catalyst to accelerate the para-ortho conversion and the conversion proceeds relatively fast in the case of La–Ni₅. The conversion is considered to be an endothermic reaction. A misch metal (Mm)-Ni₅ metal hydride alloy, which contained La and Ni, was used in our THEUS metal hydride tank. To examine the effect of the para-ortho conversion on the THEUS operation, we investigated the absorption/desorption characteristics of the metal hydride tank with BOG. We confirmed that the effect of the heat of conversion was very small and BOG could be treated as normal hydrogen for practical application.     

Microstructure and transport properties of [0 0 1]-tilt bicrystal grain boundaries in iron pnictide superconductor,cobalt-doped BaFe2As2

Relationships between microstructure and transport properties of bicrystal grain boundary (BGB) junctions were studied in cobalt-doped BaFe₂As₂ (BaFe₂As₂:Co) epitaxial films grown on [0 0 1]-tilt bicrystal substrates of MgO and (La, Sr)(Al, Ta)O₃ with misorientation angles θ_GB = 3–45°. The θ_GB of BaFe₂As₂:Co BGBs were exactly transferred from those of the bicrystal substrates. No segregation of impurities was detected at the BGB junction interfaces, and the chemical compositions of the BGBs were uniform and the same as those in the bulk film regions. A transition from a strongly-coupled GB behavior to a weak-link behavior was observed in current density–voltage characteristics under self-field around θ_GB ～ 9°. The critical current density decreased from (1.2–1.6) × 10⁶ A/cm² of the intragrain transport to (0.7–1.1) × 10⁵ A/cm² of θ_GB = 45° because supercurrent becomes more governed by Josephson current with increasing θ_GB.     

Spin doping of individual molecules by using single-atom manipulation

Being able to control the spin of magnetic molecules at the single-molecule level will make it possible to develop new spin-based nanotechnologies. Gate-field effects and electron and photon excitations have been used to achieve spin switching in molecules. Here, we show that atomic doping of molecules can be used to change the molecular spin. Furthermore, a scanning tunneling microscope was used to place or remove the atomic dopant on the molecule, allowing us to change the molecular spin in a controlled way. Bis(phthalocyaninato)yttrium (YPc(2)) molecules deposited on an Au (111) surface keep their spin-1/2 magnetic moment due to the small molecule-substrate interaction. However, when Cs atoms were carefully placed onto YPc(2) molecules, the spin of the molecule vanished as shown by our conductance measurements and corroborated by the results of density functional theory calculations.     

Numerical simulation of the hydrogen storage with reaction heat recovery using metal hydride in the totalized hydrogen energy utilization system

Numerical simulation of a hydrogen storage tank of a Totalized Hydrogen Energy Utilization System (THEUS) for application to commercial buildings was done to verify the practicality of THEUS. THEUS consists of a fuel cell, water electrolyzer, hydrogen storage tank and their auxiliary machinery. The hydrogen storage tanks with metal hydrides for load leveling have been previously experimentally investigated as an important element of THEUS. A hydrogen storage tank with 50 kg AB5 type metal hydride was assembled to investigate the hydrogen-absorbing/desorbing process, which is exothermic/endothermic process. The goal of this tank is to recover the cold heat of the endothermic process for air conditioning, and thus improve the efficiency of THEUS. To verify the practical effectiveness of this improved system, we developed a numerical simulation code of hydrogen storage tank with metal hydride. The code was validated by comparing its results with experimental results. In this code the specific heat value of the upper and lower flanges of the hydrogen storage tank was adjusted to be equal to the thermal capacity of the entire tank. The simulation results reproduce well the experimental results.     

Evaluation of neutron nuclear data on platinum isotopes

Neutron nuclear data on 10 isotopes of platinum have been evaluated for the next version of Japanese Evaluated Nuclear Data Library general-purpose file in the energy region from 10^?5 eV to 20 MeV. Resolved resonance parameters of naturally occurring isotopes were taken from a compilation work, while unresolved resonance parameters were obtained by fitting to the total and capture cross sections calculated from nuclear models. A statistical model code was applied to evaluate cross sections above the resolved resonance region. Compound, pre-equilibrium and direct-reaction processes were considered for cross-section calculation. Coupled-channel optical model parameters were employed for the interaction between neutrons and nuclei. Giant-dipole and pygmy resonance parameters for E1 γ-ray transition from platinum isotopes were determined so as to reproduce measured γ-ray spectrum. The present results reproduce experimental data very well. The evaluated data are compiled into Evaluated Nuclear Data File formatted data files.     

Proposal of a concept of future oriented machine tools for advanced manufacturing systems

In order to satisfy the recent various consumers’?needs, an advanced manufacturing system will be required. So, the innovative concept of Future Oriented Machine Tools (FOMT), which consists of four function blocks to realize the advanced manufacturing system, is proposed. The four function blocks are Management, Prediction, Observation and Strategy, and intelligent manufacturing processes are realized by utilizing these function blocks. FOMT can make a significant contribution in four stages: design stage, production scheduling stage, machining stage and post-machining stage. In the design stage, the product information such as accuracy can be evaluated in CAD, considering the manufacturing ability concurrently. In the production scheduling stage, the product schedules can be generated automatically and flexibly for the various products. In the machining stage, cutting conditions adjusted autonomously according to the machining status and machining problems. In the post-machining stage, the machining know-how data are accumulated and stored for future production and human engineers. The feasibility of it, especially the machining stage, is discussed using the developed cutting process simulator called VMSim (virtual machining simulator) from the view points of cutting force, machining error and environmental burden (CO₂ emission).