Inhibitory Effects of Cholesterol Derivatives on DNA Polymerase and Topoisomerase Activities, and Human Cancer Cell Growth

This paper describes the inhibitory activities of cholesterol derivatives such as cholesterol, sodium cholesteryl sulfate, cholesteryl-5α, 6α-epoxide, cholesteryl chloride, cholesteryl bromide, and cholesteryl hemisuccinate (compounds 1–6, respectively) against DNA polymerase (pol), DNA topoisomerase (topo), and human cancer cell growth. Among the compounds tested, compounds 2 and 6 revealed themselves to be potent inhibitors of animal pols, and the IC₅₀ values for pols were 0.84–11.6 and 2.9–148 μM, respectively. Compounds 2, 3 and 6 inhibited the activity of human topo II, with IC₅₀ values of 5.0, 12.5 and 120 μM, respectively. Compounds 2, 3 and 6 also suppressed human cancer cell (promyelocytic leukemia cell line, HL-60) growth, and LD₅₀ values were 8.8, 20.2 and 72.3 μM, respectively, suggesting that cell growth inhibition had the same tendency as the inhibition of topos rather than pols. Compounds 2 and 6 arrested the cells in S and G2/M phases, compound 3 arrested the cells in the G2/M phase, and these compounds also increased sub-G1 phase in the cell cycle. These results suggested that the effect of cell cycle arrest might be effective on both pols and topos activities. From these findings, the action mode of cholesterol derivatives as anti-cancer compounds is discussed.     

Catalytic performance of Ni/CeO2/Al2O3 modified with noble metals in steam gasification of biomass

In the steam gasification of biomass, the additive effect of noble metals such as Pt, Pd, Rh and Ru to the Ni/CeO₂/Al₂O₃ catalyst was investigated. Among these noble metals, the addition of Pt was most effective even when the loading amount of added Pt was as small as 0.01 wt.%. In addition, the catalyst characterization suggests the formation of the Pt–Ni alloy over the Pt/Ni/CeO₂/Al₂O₃.     

Enhancement of melt elasticity for poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) by addition of weak gel

Rheological properties in a molten state are studied extensively for poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate), PHB‐HV, with a small amount of crosslinked poly(epichlorohydrin), PECH, having low density of crosslink points. It is found that adding 2 wt % of xPECH greatly enhances the melt elasticity of PHB‐HV, one of the serious defects of microbial PHB, whereas it has no effect on the shear viscosity. As a result, viscoelastic nature, and thus processability, of PHB‐HV can be controlled by blending the crosslinked PECH. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Surface potential measurement of organic photo-diode consisting of fullerene/copper phthalocyanine double layered device

We investigated the surface potential built across the electrode/fullerene (C₆₀) or copper phthalocyanine (CuPc) interface and C₆₀/CuPc interface as a function of the thickness of the semiconductor film in the dark condition and under illumination. The surface potential of C₆₀ on Au, Al and Mg changes negatively with the increment of film thickness and it saturates at − 0.25, − 1.0 and − 1.5 V within 20 nm. The Fermi level alignment at C₆₀/electrode interface is established within ∼ 20 nm from electrode, and very high electric field exists due to the displacement of negative electronic charges from electrode into C₆₀. On the other hand, the surface potential of CuPc on ITO changes to + 0.1 V, and the work functions of C₆₀ and CuPc were estimated as 5.0 eV and 4.7 eV. C₆₀ film also accepts electrons from CuPc at hetero-junction interface, and the Fermi-level alignment was again obtained at C₆₀/CuPc interface under illumination. The built-in potential of ca. 0.3 V formed at C₆₀/CuPc interface was considered as the origin of the reduction of open-circuit voltage in ITO/CuPc/C₆₀/Au device compared with the optimum value of 0.6 V. On the other hand, the very high electric field formed at C₆₀/Mg contact improved the photovoltaic properties.     

Inhibition of DNA polymerase λ by glucosyl compounds from soybean (Glycine max L.) and their associated inflammatory activity

During the screening of selective DNA polymerase (pol) inhibitors, we isolated two glucosyl compounds, a cerebroside (glucosyl ceramide, AS-1-4, compound 1) and a steroidal glycoside (eleutheroside A, compound 2) from soybean (Glycine max L.). Compounds 1 and 2 selectively inhibited the activity of eukaryotic pol λ in vitro, with IC₅₀ values of 12.2 and 9.1 μM, respectively. These compounds did not influence the activities of other eukaryotic pols including those from the A-family (pol γ), B-family (pols α, δ and ε), and Y-family (pols η, ι and κ), and also showed no effect on the activity of pol β which is of the same family (X) as pol λ. The tendency for in vitro pol λ inhibition by these compounds showed a positive correlation with the in vivo suppression of TPA (12-O-tetradecanoylphorbol-13-acetate)-induced inflammation in mouse ear. These results suggest that these glucosyl compounds from soybean may be useful for their anti-inflammatory properties.     

A multiscale simulation of polymer processing using parameter-based bridging in melt rheology

To investigate the effect of molecular structure on macroscopic flow behavior of polymeric liquid, attempts have been made to embed the microscopic information into the flow simulation. Constitutive equation based on the theory of polymer dynamics is ideal but the theory is still under development. The CONNFFESSIT approach (where microscopic simulation is embedded into calculation grid in macroscopic simulation) is another promising direction but the computational cost is not practical yet. In this study, we propose another simple method using parameter-based bridging where the parameters for phenomenological constitutive equations in macroscopic flow simulation are obtained from coarse-grained molecular simulation. As an example, we performed a simulation of injection molding and examined the effect of molecular weight on warpage of the molded product. We used the primitive chain network simulation to calculate linear viscoelasticity of linear monodispersed polystyrenes from molecular weight. The obtained linear viscoelasticity was converted into the relaxation spectrum and into the flow curve to be used in the macroscopic simulations. From the flow curve, the parameters of an inelastic non-Newtonian constitutive equation were obtained and used for the simulation of filling process. The relaxation spectrum was used to calculate residual stress from the flow profile in the filling process. From the residual stress and thermal shrinkage, warpage of the product was obtained. For the examined thin plate product, significant change in the warpage direction was demonstrated according to the molecular weight of the material. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Dietary supplementation of gamma-linolenic acid improves skin parameters in subjects with dry skin and mild atopic dermatitis

Disruption of the skin barrier function caused by epidermal hyper-proliferation, results in the skin becoming dry and showing high transepidermal water loss (TEWL). Gamma linolenic acid (GLA) is reportedly efficacious for treating TEWL and epidermal hyper-proliferation. In this study, to elucidate the effect of GLA-rich oil on skin function, GLA-containing food was given to adults with dry skin or mild atopic dermatitis and skin parameters were evaluated. In the results, we recognized beneficial effects on the TEWL index. The efficacy of GLA was also demonstrated to be statistically significant especially in subjects with pro-inflammatory features. The results suggest that the mechanism of improvement of skin barrier has been associated with possible generation of anti-inflammatory metabolites from GLA. The clinical physician also confirmed that none of the subjects showed any noteworthy side effects. GLA-enriched food appears to be safe and to improve skin barrier function in subjects with dry skin conditions and mild atopic dermatitis.     

Polymer electrolyte membrane with nanomatrix channel prepared by sulfonation of natural rubber grafted with polystyrene

High‐proton‐conductive polymer electrolyte with a nanomatrix channel was prepared by graft copolymerization of styrene onto deproteinized natural rubber followed by sulfonation with chlorosulfonic acid. First, natural rubber latex was purified with urea in the presence of surfactant to remove almost all proteins present in the rubber. Second, graft copolymerization of styrene onto deproteinized natural rubber was carried out with tert‐butyl hydroperoxide/tetraethylenepentamine as an initiator at 30°C in latex stage. The graft‐copolymerized natural rubber (DPNR‐graft‐PS) was sulfonated with chlorosulfonic acid in chloroform solution at an ambient temperature. The resulting sulfonated DPNR‐graft‐PS was characterized by FTIR spectroscopy, solid state ¹³C CP/MAS NMR spectroscopy, elemental analysis, and transmission electron microscopy. High proton conductivity of about 0.1 S/cm, less water uptake of 24 wt % and comparatively good stress at break of 9 MPa were accomplished at suitable contents of styrene units and sulfur, i.e., 32 wt % and 75 mol %, respectively. The high proton conductivity, excellent stability, and good mechanical properties were associated with not only the formation of the nanomatrix channel but also a specific concentration of sulfuric acid group. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Evaporation rate effect on starting point of shrinkage stress development during drying process in solvent cast polymer film

To reveal the effect of drying conditions on shrinkage stress existing between a film and a substrate, a polystyrene/toluene solution was coated on a glass substrate, and the volume fraction of toluene at the time when the stress starts to grow (?_S) was measured at various drying temperatures and evaporation rates. ?_S decreased with increase of drying temperature at a constant evaporation rate, while ?_S increased with increase of evaporation rate at a constant drying temperature. From these results, it was suggested that the dominant factors affecting the starting point of stress were both the chain mobility and the measurement time‐scale. Considering the two factors, the tendency of ?_S with the drying conditions is quite similar to that of the solvent content at glass transition point, and this fact indicates a strong correlation between the starting point of stress and the glass transition of coated solution. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Basic study of a ship navigator's mental workload using salivary NO\documentclass{article}\usepackage{amsmath}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{amsfonts}\pagestyle{empty}\begin{document}$_{3}^{-}$ \end{document}

Evaluation of the mental workload during training for ship handling has usually depended on professionals (captain, pilot) who have lots of experience on board. We are attempting to evaluate a ship navigator's mental workload based on a physiological index. The physiological indices, namely heart rate variability (R–R interval), nasal temperature, and salivary amylase, are good indices for reading the mental workload during ship handling. Moreover, we find the possibility of using salivary NO$_{3}^{-}$ as a good index for evaluating the ship navigator's mental workload. Salivary NO$_{3}^{-}$ is expected to have a specific characteristic to represent quick response on the spot and the trend. We confirmed the response of students during simulator training, and then carried out the experiment on professionals on a real ship. We propose that salivary NO$_{3}^{-}$ can show a ship navigator's stress for ship handling in the simulator and on a real ship. This work to evaluate the ship navigator's mental workload using salivary NO$_{3}^{-}$ is the first attempt worldwide. © 2013 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.