Effect of platelet-activating factor on lipoprotein lipase and blood lipids

We investigated the effect of platelet-activating factor (PAF) and of the PAF specific antagonist CV-6209 on plasma lipid metabolism, and particularly on post-heparin plasma lipolytic activity in male Wistar rats. Lipoprotein lipase (LPL) activity was enhanced by intravenous injection of PAF before intravenous injection of heparin when the PAF dose was low (0.2 μg/kg). PAF activated hepatic triacylglycerol lipase (HTGL) activity dose-dependently. Plasma triacylglycerols (TG) significantly decreased with the activation of LPL and/or HTGL. Plasma total cholesterol (TC) and phospholipid (PL) levels decreased at a low dose of PAF (0.2 μg/kg), but increased when higher doses were used. The PAF antagonist CV-6209 partially reversed the PAF induced effects on HTGL, TC and PL. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, Tokyo, Japan, May 1989.     

Processing of ethanol fermentation broths by Candida krusei to separate bioethanol by pervaporation using silicone rubber‐coated silicalite membranes

BACKGROUND: Pervaporation employing ethanol‐permselective silicalite membranes as an alternative to distillation is a promising approach for refining low‐concentration bioethanol solutions. However, to make the separation process practicable, it is extremely important to avoid the problems caused by the adsorption of succinate on the membrane during the separation process. In this work, the pervaporation of an ethanol fermentation broth without succinate was investigated, as well as the influence of several fermentation broth nutrient components. RESULTS: Candida krusei IA‐1 produces an extremely low level of succinate. The decrease in permeate ethanol concentration through a silicone rubber‐coated silicalite membrane during the separation of low‐succinate C. krusei IA‐1 fermentation broth was significantly improved when compared with that obtained using Saccharomyces cerevisiae broth. By treating the fermentation broth with activated carbon, bioethanol was concentrated as efficiently as with binary mixtures of ethanol/water. The total flux was improved upto 56% of that obtained from the separation of binary mixtures, compared with 43% before the addition of activated carbon. Nutrients such as peptone, yeast extract and corn steep liquor had a negative effect on pervaporation, but this response was distinct from that caused by succinate. CONCLUSION: For consistent separation of bioethanol from C. krusei IA‐1 fermentation broth by pervaporation, it is useful to treat the low nutrient broth with activated carbon. To further improve pervaporation performance, it will be necessary to suppress the accumulation of glycerol. Copyright © 2009 Society of Chemical Industry     

Specific heat anomaly of nonstoichiometric U4O9−y

A λ-type specific heat anomaly of U₄O_9?y, which occurs slightly above room temperature, was measured for the samples with different O/U ratios. The transition temperatures obtained from the peak of λ-type specific heat anomaly are in fairly good agreement with the data by X-ray diffraction and electrical conductivity measurements. The entropy increment for the transition was obtained to be 0.46 e.u. for UO_2.250, 0.56 e.u. for UO_2.240 and 0.70 e.u. for UO_2.228, depending on O/U ratio. On the basis of the entropy change with O/U ratio, the mechanism of the phase transition is discussed. The entropy change due to the phase transition is mainly divided into two terms: one is due to the order-disorder rearrangement of U(IV) and U(V) ions,the other is associated with the displacement of oxygens ions. The former term is estimated to be rather smaller than the entropy change calculated by the Bragg-Williams approximation, and the latter is calculated using the X-ray diffraction data with the assumption of the Willis model.     

Effect of packed structure on flow behaviour in a trickle bed biofilter

The effects of operation conditions on the flow behaviour in gas–liquid countercurrent trickle bed biofilter were experimentally examined. In order to prevent gas channelling in the biofilter, packings with a relatively large void fraction, which have a role to maintain a high void fraction in the bed, were added. The gas and liquid velocities of the packed structure and the packings were changed, and the residence time distributions (RTDs) of the gas and liquid were measured. It was found that the addition of void supporters was very effective in the suppression of gas channelling.     

A behavioral model for optically powered OCT endoscope with a micro electrostatic vertical‐comb optical scanner

This paper presents a novel device architecture for optically actuated microelectromechanical systems (MEMS) endoscopes for optical coherence tomography (OCT) measurement. A 10‐mW infrared light beam at a wavelength of 1.5 µm is transferred through the single‐mode fiber to provide a scanning MEMS mirror with the drive voltage (maximum 11 V) by exciting a photovoltaic cell, while also providing with a secondary light beam at a wavelength of 1.3 µm for the OCT measurement. An electrostatic vertical comb‐drive optical scanner (1.5 mm × 2.0 mm × 0.5 mm) has been developed by using the deep reactive ion etching (DRIE) of a silicon‐on‐insulator (SOI) wafer. The design of the scanner module is discussed, along with the experimental results of electrostatic operation. An equivalent circuit model for the optical scanner is developed to explain the behavior of the optically powered actuation mechanism, including the hysteresis loop in the frequency response and the voltage dependence of oscillating angle (mechanical peak ±3.2°/7 V around the resonance frequency of 250 Hz). OCT measurement of a tissue is demonstrated to reconstruct the cross‐sectional image of a fingerprint at a resolution of lateral 40 µm × vertical 8 µm and penetration depth of 2.5 mm. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Ethanolamine Is a New Anti-Prion Compound

Prion diseases are a group of fatal neurodegenerative disorders caused by accumulation of proteinaceous infectious particles, or prions, which mainly consist of the abnormally folded, amyloidogenic prion protein, designated PrP^Sc. PrP^Sc is produced through conformational conversion of the cellular isoform of prion protein, PrP^C, in the brain. To date, no effective therapies for prion diseases have been developed. In this study, we incidentally noticed that mouse neuroblastoma N2a cells persistently infected with 22L scrapie prions, termed N2aC24L1-3 cells, reduced PrP^Sc levels when cultured in advanced Dulbecco’s modified eagle medium (DMEM) but not in classic DMEM. PrP^C levels remained unchanged in prion-uninfected parent N2aC24 cells cultured in advanced DMEM. These results suggest that advanced DMEM may contain an anti-prion compound(s). We then successfully identified ethanolamine in advanced DMEM has an anti-prion activity. Ethanolamine reduced PrP^Sc levels in N2aC24L1-3 cells, but not PrP^C levels in N2aC24 cells. Also, oral administration of ethanolamine through drinking water delayed prion disease in mice intracerebrally inoculated with RML scrapie prions. These results suggest that ethanolamine could be a new anti-prion compound.     

Improved heat and solvent resistance of a pressure‐sensitive adhesive thermally processable by isocyanate dimer dissociation

Methods that do not involve use of an organic solvent are being considered for manufacturing environmental‐friendly pressure‐sensitive adhesive tapes. Among these methods, the hot‐melt method exhibits high productivity but is somewhat limited in terms of performance. Hot‐melt‐fabricated pressure‐sensitive adhesives require heating fluidization and cooling solidification, and it is extremely difficult to improve their heat resistance. We examine thermally processable pressure‐sensitive adhesives with a completely new structure, fabricated based on the thermal dissociation of the isocyanate dimer. This enables thermal processing of materials softened by thermal dissociation. Fabrication of crosslinkable pressure‐sensitive adhesive becomes possible through a reaction of isocyanate caused by dissociation of its dimer. It is found that improving thermal and solvent resistances, which are disadvantages associated with conventional hot‐melt pressure‐sensitive adhesives, is potentially possible with the pressure‐sensitive adhesive reported here. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41444.     

Terminal defined chain-growth polycondensation of 4-chloropyridine

This work examines the polycondensation of 4-chloropyridine derivatives using an N-(4-tert-butylbenzyl)-4-chloropyridinium (BPymCl) initiator and ion exchange reagents NaBPh₄, NaBF₄, and TBABF₄. The ¹H NMR spectra demonstrate that the product quantity is proportional to the total conversion of the monomer and the initiator. The MALDI-TOF MS spectrum shows that the product contains more than 9 monomer units. The polymerization was well-terminated via the addition of dimethylaminopyridine. These results indicate that the polycondensation proceeds in a chain-growth manner. This polycondensation could be a new example of a controlled polymerization with a well-defined end group.     

Experimental verification of the effect of a voltage‐detection‐based shunt active filter for harmonic damping throughout a power distribution line

This paper is focused on a voltage‐detection‐based shunt active filter for installation on a power distribution system. A main objective of the active filter is to achieve damping of harmonic propagation coming from series/parallel resonance between capacitors for power factor correction and line inductors in the distribution system. The active filter installed at the end terminal of a distribution feeder is controlled in such a way as to present infinite impedance to the external circuit for the fundamental frequency, and to exhibit low resistance for harmonic frequencies. As a result, the active filter acts as a damping resistor for the harmonic propagation, like a 50‐Ω terminator installed at the end of a signal transmission line. It is verified by experiment that the active filter intended for harmonic termination has the capability of harmonic damping throughout the distribution feeder. © 2000 Scripta Technica, Electr Eng Jpn, 133(2): 1–10, 2000     

Effects of repetitive transcranial magnetic stimulation and transcranial direct current stimulation on posterior alpha wave

Because of the unclear conclusion of the repetitive transcranial magnetic stimulation (rTMS) and transcranial direct current stimulation (tDCS) effects on the posterior electroencephalogram (EEG) alpha wave, this study is aimed at investigating these unclear effects. Transcranial stimulation effects are observed by analyzing a measured EEG at the occipital area between prestimulation and the poststimulation. The EEG alpha power and alpha coherence are calculated and analyzed in terms of the ratio between eyes closed and eyes open periods. The results reveal that alpha power ratio at the individual alpha frequency (IAF) significantly increases after the 1‐Hz rTMS and cathodal tDCS and slightly decreases after the anodal tDCS compared to the control and the sham conditions. The results also show that there is a significant difference between the inhibited and excited conditions. Similarities are observed in the patterns of the alpha coherence ratio and alpha power changes. The alpha coherence increases in the rTMS and cathodal tDCS conditions, and decreases in the anodal tDCS condition but these effects occur only when comparing across the hemispheres (O1–O2 and P3–P4). It can be summarized that the EEG alpha wave can be influenced by the transcranial stimulations. The rTMS and cathodal tDCS seem to facilitate the alpha activity and the anodal tDCS inhibits it. © 2013 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.