Deposition of chlorophyll-a Langmuir-Blodgett films onto an SnO2 optically transparent electrode

The deposition of chlorophyll-a monolayers onto an SnO₂ optically transparent electrode was studied in relation to the deposition ratio. The values of the deposition ratio, which were approximately 0.95 for the upward movement and very small but non-zero for the downward movement, suggest that the multilayers prepared are Z-type films containing a small fraction of the Y-type component corresponding to the non-zero value. This is consistent with the photo- electrochemical behaviour of the pigmented electrodes which is markedly dependent on the deposition ratios, indicating structural inhomogeneity or imperfection of the multilayers.     

An electrical conductivity and X-ray study of a high-temperature transition in U4O9

The high temperature transition in U₄O₉ has been studied by electrical conductivity measurements and X-ray diffraction. From the electrical conductivity measurements, a similar variation of log σ$\text{T}$ with reciprocal temperature to that in the transition range near room temperature is observed in the temperature range from about 300 to 800°C. Like the low temperature transition, a small lattice contraction is also observed in that temperature range by means of X-ray diffractometry, and the transition temperature increases from 530 to 620°C with increasing O/U ratio. After the transition the intensity of $\text{4a}{}_0$ superlattice reflections increases, but that of $\text{8a}{}_0$ superlattice reflections disappears. The mechanism of this high temperature transition is considered to be a second-order transition of the order—disorder type based on the configurational change of U⁴⁺ and U⁵⁺ with the shift of some portions of the lattice oxygen atoms from the lattice sites to the interstitial positions. The phase diagram of U₄O₉ is presented on the basis of the electrical conductivity and X-ray data.     

Attribute conjunctions and the part configuration advantage in object category learning.

Five experiments demonstrated that in object category learning people are particularly sensitive to conjunctions of part shapes and relative locations. Participants learned categories defined by a part's shape and color (part-color conjunctions) or by a part's shape and its location relative to another part (part-location conjunctions). The statistical properties of the categories were identical across these conditions, as were the salience of color and relative location. Participants were better at classifying objects defined by part-location conjunctions than objects defined by part-color conjunctions. Subsequent experiments revealed that this effect was not due to the specific color manipulation or the role of location per se. These results suggest that the shape bias in object categorization is at least partly due to sensitivity to part-location conjunctions and suggest a new processing constraint on category learning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Boiling two-phase flow under microgravity

To study the effects of reduced gravity on the flow regime and the heat transfer characteristics of a boiling two-phase horizontal flow, parabolic flight experiments were performed by using an aircraft. The gravity level during the parabolic flight and the duration time were about −0.01g_e +0.01g_e and 20 s, respectively. Under earth gravity, many small bubbles are detached very frequently from the heater rod surface, flowing into the upper stream due to the buoyancy and resulting in a stratified flow in the cases of lower inlet fluid velocity and higher heat flux. Under microgravity conditions, bubbles are hardly detached from the heater rod, growing and coalescing to become much larger along the heater rod, surrounding the heater rod in the downstream. This tendency was more noticeable in the cases of lower inlet fluid velocity, higher heat flux and lower inlet fluid subcooling. The local heat transfer coefficients at the bottom of the heater rod tend to decrease slightly under microgravity compared with those under earth gravity because of the reduction of the heat removal due to natural convection. On the other hand, the local heat transfer coefficients at the top of the heater rod tend to increase slightly under microgravity. However, the differences of the local heat transfer coefficients are very small in spite of large differences of the flow regimes under earth gravity and microgravity.     

Novel method for producing amorphous rice flours by milling without adding water

The present study investigated a novel milling method for producing amorphous rice starch without adding water. A new type of milling machine was developed (termed the shear and heat milling machine (SHMM)), which is capable of applying mechanical shear and heat during the milling process. The SHMM consisted of a pair of rice mortars attached to a servomotor and a ring heater. The heater was installed on the upper mortar; the temperature of the upper mortar was monitored and controlled by a thermal controller. Wide‐angle X‐ray diffraction (WAXD) analysis was used to determine the crystallinities of starch in rice flour samples produced using the SHMM at different milling temperatures. The WAXD data for milled rice flour that had been heated exhibited no diffraction peaks. This experimental result demonstrates that the developed SHMM produces amorphous rice starch easily by milling with heating without the addition of water. The milling conditions such as the shear and heat applied can be used to control the crystallinity of starch in rice.     

Early construction and operation of the highly contaminated water treatment system in Fukushima Daiichi Nuclear Power Station (III) – a unique simulation code to evaluate time-dependent Cs adsorption/desorption behavior in column system

A simulation code was developed to evaluate the performance of the cesium adsorption instrument operating in Fukushima Daiichi Nuclear Power Station. Since contaminated water contains seawater whose salinity is not constant, a new model was introduced to the conventional zeolite column simulation code to deal with the variable salinity of the seawater. Another feature of the cesium adsorption instrument is that it consists of several columns arranged in both series and parallel. The spent columns are replaced in a unique manner using a merry-go-round system. The code is designed by taking those factors into account. Consequently, it enables the evaluation of the performance characteristics of the cesium adsorption instrument, such as the time history of the decontamination factor, the cesium adsorption amount in each column, and the axial distribution of the adsorbed cesium in the spent columns. The simulation is conducted for different operation patterns and its results are given to Tokyo Electric Power Company (TEPCO) to support the optimization of the operation schedule. The code is also used to investigate the cause of some events that actually occurred in the operation of the cesium adsorption instrument.     

Exfoliation of non-swelling muscovite on dodecylammonium chloride intercalation between layers using wet-jet milling

The exfoliation of layered muscovite with non-swelling property has been performed by combining various processes, such as heating, intercalation, and wet-jet milling. The c axis of muscovite was expanded from 2004.0 to 2022.8 pm at 800 °C without the destruction of crystallinity of muscovite. The heating at 800 °C led to the weak attraction force between potassium ions and silicate layers by hydroxylation of muscovite. The muscovite heated at 800 °C progressed the intercalation of dodecylammonium chloride (DDAC) into the layers effectively. Furthermore, the DDAC molecules were inserted to the interlayer of muscovite effectively by suppressing the formation of micelle of DDAC. The sedimentation test of wet-jet milled muscovite slurry showed that the relative packing density of muscovite was decreasing with increasing the amount of the intercalated DDAC. As results, the aspect ratio of muscovite prepared with combining the heating, the intercalation and the wet-jet milling was increased by 253% as compared to the raw muscovite. The aspect ratio was calculated from laser particle size distribution and thickness size distribution which was estimated from field emission-scanning electron microscopic images. The expansion of the interlayer led to the effective exfoliation of muscovite with high aspect ratio.