Analysis of main pigments and other ingredients in lac color product

The contents of the main pigments and other ingredients in commercial lac color products were determined by HPLC using an RP-18 column with 0.1 mol/L citric acid buffer solution-methanol (16:5) as the mobile phase, and a photodiode array (PDA) detector set at 280 nm and 490 nm. The main pigments were confirmed by PDA and electrospray ionization mass spectrometry. Laccaic acids A, B, C and E were detected in all lac color products, and the ratio of content of laccaic acid A in all products was over 50%. The total contents of laccaic acids A, B and C in lac color food additive products and reagent products were 775-858, 797 and 779 g/kg, respectively. As for the contents of ingredients except pigments in commercial food additive products, the maximum moisture content was about 10%, and ether-soluble substances amounted to 0.5-3.6%.     

自组织InAs/GaAs量子点的表面氮化研究

用低温光荧光(PL)和透射电子显微镜(TEM)研究了表面氮化自组织InAs/GaAs量子点的光学性能和微观结构。结果表明氮化后形成薄层的InAsN薄膜作为应变缓和层覆盖在量子点的表面,使得随着氮化时间的增加,InAs量子点的位错密度提高、尺寸变大、纵横比提高、发光波长变长、强度变低。     

State difference feedback for stabilizing uncertain steady states of non-linear systems

Supposing a non-linear system is subjected to parametric uncertainties, the present paper aims at stabilizing its unstable steady states. A distinctive feature of the problem is that exact information about the steady state is unavailable. To cope with the difficulty, we have examined the applicability of the state difference feedback which uses the difference between the present state x(t) and the past state x(t-T). A rigorous stability analysis has been executed for the case where state deviations are controllable by a single input variable. The stability analysis has led to a favourable conclusion that if the number of unstable modes is just two, and if they are not associated with the origin in the complex plane, we are always able to find a controller which stabilizes the deviations from the unknown steady state. Design process is illustrated by using two kinds of pendulum systems.     

Supercritical fluid extraction of fungal oil using CO2, N2O,CHF3 and SF6

The extraction of oil from fungi (Mortierella ramanniana var.angulispora) was studied using carbon dioxide (CO₂), nitrous oxide (N₂O), trifluoromethane (CHF₃) and sulfur hexafluoride (SF₆) under supercritical conditions. The oil solubility was highest in SC-N₂O followed by SC-CO₂, while both SC-CHF₃ and SC-SF₆ showed poorer solvent power. The recorded oil solubilities at 333 K and 24.5 MPa were 2.3 wt% in N₂O, 0.48 wt% in CO₂, 0.0099 wt% in CHF₃ and 0.0012 wt% in SF₆. The oil solubilities in SC-N₂O and SC-CO₂ were measured over the pressure range 15.7–29.4 MPa and at temperatures ranging from 313–353 K. N₂O always showed greater solvent power than did CO₂ at the same temperature and pressure. The solvent power of a supercritical fluid increases with density at a given temperature, and increases with temperature at constant density. The change in neutral lipid composition of the extracted oil with the extraction ratio was measured. Free fatty acids or diglycerides were extracted more easily than triglycerides or sterol esters. The change in fatty acid composition was also measured. The proportion of γ-linolenic acid in the extract remained constant throughout the extraction.     

Development of silicon wafer packaging technology for deep UV LED

This paper reports a deep‐ultraviolet LED (deep‐UV‐LED) package based on silicon MEMS process technology (Si‐PKG). The package consists of a cavity formed by silicon crystalline anisotropic etching, through‐silicon vias (TSVs) filled with electroplated Cu, bonding metals made of electroplated Ni/AuSn and a quartz lid for hermetic sealing. A deep‐UV LED die is directly mounted in the Si‐PKG by AuSn eutectic bonding without a submount. It has advantages in terms of size, heat dissipation, light utilization efficiency, productivity and cost over conventional AlN ceramic packages. We confirmed a light output of 30 mW and effective reflection on Si (111) cavity slopes in the Si‐PKG. Based on simulation, further improvement of the optical output is expected by optimizing DUV‐LED die mount condition.     

A scalable interest-oriented peer-to-peer pub/sub network

There has been a big challenge in structured peer-to-peer overlay network research area. Generally, a structured overlay network involves nodes evenly or based on their resource availabilities, and gathers nodes?? resources to achieve some bigger tasks. The challenge here is to gather resources based on nodes?? interests, and only interested nodes are involved in a certain task. Toward this challenge, we propose a new scheme to a peer-to-peer publish/subscribe network. Publish/subscribe represents a new paradigm for distributed content delivery. It provides an alternative to address-based communication due to its ability to decouple communication between the source and the destination. We propose a Bloom filter based mapping scheme to map IDs to nodes?? interests in addition to new interest proximity metric to forward events and to build nodes?? routing tables. We also propose a new approach called ??shared interest approach?? for network discovery. To evaluate the algorithms proposed in this work, we conducted simulations in both static and dynamic settings, and found a low false positive rate. We also discuss about a well-known application called Twitter, and show how our scheme would work in a real environment.     

Simple systolic arrays for discrete cosine transform

in this paper, simple 1-D and 2-D systolic array for realizing the discrete cosine transform (DCT) based on the discrete Fourier transform (DFT) fo an input sequence are presented. The proposed arrays are obtained by a simple modified DFT (MDFT) and an inverse DFT (IDFT) version of the Goertzel algorithm combined with Kung's approach. The 1-D array requiresN cells, one multiplier and takesN clock cycles to produce a completeN-point DCT. The 2-D array takes N clock cycles, faster than the 1-D array, but the area complexity is larger. A continuous flow of input data is allowed and no idle time is required between the input sequences.     

Specific heat anomaly of nonstoichiometric U4O9−y

A λ-type specific heat anomaly of U₄O_9?y, which occurs slightly above room temperature, was measured for the samples with different O/U ratios. The transition temperatures obtained from the peak of λ-type specific heat anomaly are in fairly good agreement with the data by X-ray diffraction and electrical conductivity measurements. The entropy increment for the transition was obtained to be 0.46 e.u. for UO_2.250, 0.56 e.u. for UO_2.240 and 0.70 e.u. for UO_2.228, depending on O/U ratio. On the basis of the entropy change with O/U ratio, the mechanism of the phase transition is discussed. The entropy change due to the phase transition is mainly divided into two terms: one is due to the order-disorder rearrangement of U(IV) and U(V) ions,the other is associated with the displacement of oxygens ions. The former term is estimated to be rather smaller than the entropy change calculated by the Bragg-Williams approximation, and the latter is calculated using the X-ray diffraction data with the assumption of the Willis model.     

Structure and surface properties of diaminocyclohexane plasma polymer films

Plasma polymers of three isomers of diaminocyclohexane (DACH) were deposited on polyethylene, SiO₂, and mica at 20°C. The deposition rate was measured as a function of plasma density and power; a maximum was observed in the latter function. The deposition rate was highest for the monomer with the highest flow rate. The film refractive index was observed to increase with both power density and the degree of fragmentation in the plasma. Film composition was measured by elementary analysis, and was found to be almost identical for each of the three isomers; a mechanism for the polymerization reaction is proposed. The percentage of primary amino groups decreased with increasing power density and with film thickness. Surface force measurements of the thickness and refractive index agreed well with the corresponding ellipsometry values in dry air, and am adhesive force, independent of power density, was measured. When the film was exposed to water vapor, it swelled considerably and the adhesion was determined by capillary forces. Associated with swelling, at high power, was an extremely regular 2-ply rope pattern of protruding material. © 1993 John Wiley & Sons. Inc.