Dynamic fields generated by rapid crack growth

Stresses and strains near a rapidly propagating crack tip are affected by the mass density of the material. This paper starts with a brief summary of analytical results for near-tip dynamic fields as predicted by linear elastic fracture mechanics. Next, exact expressions are derived for dynamic crack-line strains, for mode-III crack propagation in a nonlinear elastic material and in an elastic perfectly-plastic material. These expressions are valid on the crack line from the moving crack tip to the moving boundary with the region of linearly elastic deformation. For steady-state crack growth, a critical strain criterion is used to compute the relation between external load and crack tip speed. The required external load increases with crack-tip speed.     

Transformation and fragmentation behavior of molten metal drop in sodium pool

In order to clarify the fragmentation mechanism of a metallic alloy (U–Pu–Zr) fuel on liquid phase formed by metallurgical reactions (liquefaction temperature = 650 °C), which is important in evaluating the sequence of core disruptive accidents for metallic fuel fast reactors, a series of experiments was carried out using molten aluminum (melting point = 660 °C) and sodium mainly under the condition that the boiling of sodium does not occur. When the instantaneous contact interface temperature (T_i) between molten aluminum drop and sodium is lower than the boiling point of sodium (T_c,bp), the molten aluminum drop can be fragmented and the mass median diameter (D_m) of aluminum fragments becomes small with increasing T_i. When T_i is roughly equivalent to or higher than T_c,bp, the fragmentation of aluminum drop is promoted by thermal interaction caused by the boiling of sodium on the surface of the drop. Furthermore, even under the condition that the boiling of sodium does not occur and the solid crust is formed on the surface of the drop, it is confirmed from an analytical evaluation that the thermal fragmentation of molten aluminum drop with solid crust has a potential to be caused by the transient pressurization within the melt confined by the crust. These results indicate the possibility that the metallic alloy fuel on liquid phase formed by the metallurgical reactions can be fragmented without occurring the boiling of sodium on the surface of the melt.     

Isolation and characterization of a novel 5-oxoprolinase (without ATP-hydrolyzing) from Alcaligenes faecalis N-38A

A screening test was undertaken to isolate a microorganism that produced 5-oxoprolinase (without ATP-hydrolyzing). The 5-oxoprolinase (without ATP-hydrolyzing) activity (decyclization activity toward L-pyroglutamate) was found in a cell-free extract of Alcaligenes faecalis N-38A, newly isolated from a soil sample. The enzyme was purified as a homogeneous preparation. The molecular weight of the enzyme was estimated to be 47,000. The decyclization activity was specific for L-pyroglutamate, and independent of ATP and metal ions. The reaction was a reversible one, i.e., cyclization reaction of L-glutamate to yield pyroglutamate was identified.     

Localization of Rho GTPase in sea urchin eggs

OBJECTIVE: Previous studies in our laboratory showed that the platelet anti-aggregating effect exerted by insulin, mediated by a nitric oxide (NO)-induced increase of guanosine-3',5'-cyclic monophosphate (cGMP), is lost in the insulin-resistant of obesity and obese NIDDM. It is not clear 1) whether the alterations observed in obese NIDDM patients are attributable to the obesity-related insulin resistance or to diabetes per se and 2) whether insulin-resistant states present a normal or a blunted response to NO. This study has been conducted to investigate 1) the platelet sensitivity to insulin in lean NIDDM and 2) the platelet sensitivity to an NO donor, glyceryl trinitrate (GTN), in obesity and in both lean and obese NIDDM. RESEARCH DESIGN AND METHODS: We determined 1) ADP-induced platelet aggregation and platelet cGMP content in platelet-rich plasma (PRP) obtained from 11 lean NIDDM patients, after a 3-min incubation with insulin (0, 240, 480, 960, 1,920 pmol/l) and 2) ADP-induced platelet aggregation and platelet cGMP content in PRP obtained from 9 obese subjects, 11 lean and 8 obese NIDDM patients, and 18 control subjects, after a 3-min incubation with 0, 20, 40, and 100 mumol/l GTN. RESULTS: Insulin dose-dependently decreased platelet aggregation in lean NIDDM patients (P = 0.0001): with 1,920 pmol/l of insulin, ADP ED50 was 141.5 +/- 6.4% of basal values (P = 0.0001). Furthermore, insulin increased platelet cGMP (P = 0.0001) from 7.5 +/- 0.2 to 21.1 +/- 3.7 pmol/10(9) platelets. These results were similar to those previously described in healthy subjects. GTN reduced platelet aggregation in all the groups (P = 0.0001) at all the concentrations tested (P = 0.0001), but GTN IC50 values were much higher in insulin-resistant patients: 36.3 +/- 5.0 mumol/l in healthy control subjects, 26.0 +/- 6.0 mumol/l in lean NIDDM patients (NS vs. control subjects), 123.6 +/- 24.0 mumol/l in obese subjects (P = 0.0001 vs. control subjects), and 110.1 +/- 19.2 mumol/l in obese NIDDM patients (P = 0.0001 vs. control subjects). GTN dose-dependently increased platelet cGMP in all the groups (P = 0.0001 in control subjects, lean NIDDM patients, and obese subjects; P = 0.04 in obese NIDDM patients). Values reached by obese subjects and obese NIDDM patients, however, were lower than those reached by control subjects (with 100 mumol/l of GTN, P = 0.001 and P = 0.0001, respectively). In healthy control subjects and in obese subjects, the insulin:glucose ratio, used as an indirect measure of insulin sensitivity, was positively correlated to GTN IC50 (r = 0.530, P = 0.008), further suggesting that the sensitivity to NO is reduced in the presence of insulin resistance. CONCLUSIONS: The insulin anti-aggregating effect is preserved in lean NIDDM; platelet sensitivity to GTN in preserved in lean NIDDM but is reduced in the insulin-resistant states of obesity and obese NIDDM. Resistance to nitrates, therefore, could be considered another feature of the insulin-resistance syndrome.     

Strongyloidiasis associated with nephrotic syndrome

We report a nephrotic syndrome patient with eosinophilia who developed ileus, epigastralgia and malabsorption due to strongyloidiasis which became symptomatic by steroid therapy. The patient was then treated with thiabendazole and recovered. A percutaneous renal biopsy revealed minimal change nephrotic syndrome. This renal injury may be brought on by severe infection of Strongyloides stercoralis. It is important to rule out strongyloidiasis prior to corticosteroid therapy to patients from eosinophilia endemic areas.     

Tensile properties and plastic deformation modes ofβ Zr-Nb alloys

Tensile properties and plastic deformation modes of zirconium-niobium alloys were investigated at 290 and 77 K in the wide composition range from metastable to stable phase. Three types of plastic deformation modes, {332}113 twinning, {112}111 twinning and slip, were observed depending on alloy composition and temperature. {332}113 twinning, which occurs in metastable zirconium alloys, is related to the stability of phase to decomposition and leads to low yield stress and large elongation. On the other hand, {112}111 twinning, which appears in stable zirconium alloys, results from high critical stress for slip due to solution hardening and high Peierls stress and does not affect tensile properties significantly. The results obtained for zirconium-alloys are similar to those for titanium alloys, strongly suggesting that {332}113 twinning is an important plastic deformation mode which is common to phase alloys containing athermal phase.     

Least squares approach in measurement-dependent filtering for selective medical images

An image-processing method called measurement-dependent filtering has been introduced to improve the SNR (signal-to-noise ratio) of selective images produced by various medical imaging systems. The basic algorithm involves the combination of the low-frequency information of the selective image with the high-frequency information of a nonselective image. A spatially variant control function modulates the amount of high frequency to be added at each point. A least-mean-square (LMS) control function formed from two basis images, namely the high-passed versions of the nonselective image (M(b)) and the selective image (S(b)), is introduced. The original algorithm is now viewed as a two-stage filtering method, including the low-pass filtering noise reduction and least squares filtering for the edge restoration. An appropriate linear transformation is used to convert the original basis images M(b) and S(b) into a new pair with orthogonal noise. This allows the implementation of the LMS and control function with practically obtainable a priori knowledge.