Current Understanding of the Structure,Stability and Dynamic Properties of Amyloid Fibrils

Amyloid fibrils are supramolecular protein assemblies represented by a cross-β structure and fibrous morphology, whose structural architecture has been previously investigated. While amyloid fibrils are basically a main-chain-dominated structure consisting of a backbone of hydrogen bonds, side-chain interactions also play an important role in determining their detailed structures and physicochemical properties. In amyloid fibrils comprising short peptide segments, a steric zipper where a pair of β-sheets with side chains interdigitate tightly is found as a fundamental motif. In amyloid fibrils comprising longer polypeptides, each polypeptide chain folds into a planar structure composed of several β-strands linked by turns or loops, and the steric zippers are formed locally to stabilize the structure. Multiple segments capable of forming steric zippers are contained within a single protein molecule in many cases, and polymorphism appears as a result of the diverse regions and counterparts of the steric zippers. Furthermore, the β-solenoid structure, where the polypeptide chain folds in a solenoid shape with side chains packed inside, is recognized as another important amyloid motif. While side-chain interactions are primarily achieved by non-polar residues in disease-related amyloid fibrils, the participation of hydrophilic and charged residues is prominent in functional amyloids, which often leads to spatiotemporally controlled fibrillation, high reversibility, and the formation of labile amyloids with kinked backbone topology. Achieving precise control of the side-chain interactions within amyloid structures will open up a new horizon for designing useful amyloid-based nanomaterials.     

Synthesis of Sn-Incorporated Folded Sheets Mesoporous Materials (Sn-FSM-16)

Sn-incorporated folded sheets mesoporous materials (Sn-FSM-16) with various contents of Sn were synthesized by using a mixture of water glass, SnCl₄ and NaOH as starting materials. Hexadecyltrimethyl-ammonium chloride (surfactant) was used to intercalate into the layered silicate. The reaction process was followed by measurements of XRD patterns of intermediates. The Sn-FSM-16 was formed via the following mechanism: (1) layered silicates such as - - and -Na₂Si₂O₅ were formed as intermediates by the calcination of the mixture of the starting materials; (2) the surfactant was intercalated into the layered silicates; (3) the surfactant-silicate complex with hexagonal structure was obtained as a precursor of Sn-FSM-16; (4) the precursor was calcined to decompose the surfactant in the interlayer and was changed to Sn-FSM-16. The structural aspect of Sn in Sn-FSM-16 was studied by XPS profiles of Sn 3d _5/2 and Si_2p, ²⁹ Si MAS NMR and FTIR. The content of Sn in Sn-FSM increased with increasing concentrations of both Sn and NaOH in the starting materials. The surface area of Sn-FSM-16 decreased with an increase of Sn content in Sn-FSM (1160–620 m²/g).     

Vapor phase hydroformylation of ethene over Co/SiO2 promoted by noble metals: dynamic in situ diffuse reflectance FT-IR study of surface species

An in situ diffuse reflectance FT-IR technique was employed to investigate the active surface species and the reaction mechanism of the oxygenate formation in the vapor phase hydroformylation of ethene on Co/SiO₂ promoted with various noble metals such as Ir, Rh, Pt, Re, Ru, and Pd. Co(A)/SiO₂ and Ir(CO)/SiO₂ which were derived from cobalt(II) acetate and Ir₄(CO)₁₂, respectively, were quite inactive in the reaction, and showed only quite small peaks of adsorbed CO under the conditions of 1.1 MPa of C₂H₄/CO/H₂ at 298 K. In contrast, Co(A)-Ir(CO)/SiO₂, which were very active in the reaction, exhibited strong absorption bands of linear and bridged CO species. At 423–463 K, propanal adsorbed on the catalyst and acyl species which is suggested as the intermediate for the formation of propanal were also observed on this catalyst. By exposing CO preadsorbed on this catalyst to C₂H₄/H₂ at 289 K and 0.1 MPa, the intensity of the linear CO band decreased, and the bands of propanal and acyl species emerged simultaneously, whereas that of the bridged CO band remained constant after the initial drop. These results suggested that the oxygenates are formed via the CO insertion into adsorbed ethyl species, and linear CO species plays a major role in the CO insertion on these noble metal-promoted cobalt catalysts.     

Formation of Small-Sized CdSxSe1-x Crystals in Sol-Gel-Derived SiO2 Glasses

Silica glasses doped with small-sized CdS_x-Se_1-x crystals were prepared by the sol-gel method. Gels synthesized by the hydrolysis of Si(OC₂H₅)₄, in the presence of CdSeO₄ with NH₄SCN dissolved in HNO₃ or NH₄OH, were heated in H₂-N₂ atmosphere. The pH value of solutions for CdSeO⁴ and NH⁴SCN primarily determined the fraction of anions in CdS^xSe^1-x crystals. The anion content in crystals was dependent on the pH value of the solvent and/or heat-treatment temperature, and the sulfur fraction changed from 0.1 to 0.6. The optical absorption spectra were red-shifted as the selenium content and the crystal size increased, and the emission spectra showed a sharp band near the absorption edge position and a broad tail extending into the long wavelength. The optical band gap energies increased reciprocally proportional to the square of the crystal size.     

Synthesis and properties of N,N'-unsymmetrical dialkyl-3,4:9,10-perylenebis(dicarboximide)s

N,N'- Unsymmetrical dialkyl-3,4:9,10-perylenebis(dicarboximide)s (in which alkyl = methyl, ethyl, propyl, butyl, isobutyl, pentyl, hexyl and octyl) were prepared by the condensation of N-alkyl-3,4:9,10-perylene-tetracarboxylic monoanhydride monoimide with the appropriate alkyl-amines. The properties of these derivatives as pigments were tested and their thermal stability measured.     

Characterization of highly active silver catalyst for NOx reduction in lean-burning engine exhaust

A new Ag/Al₂O₃ catalyst for removing NOx in lean exhaust gas was developed. Oxidized Ag/Al₂O₃ catalyst is highly active for reduction of NOx with ethanol and propene, whereas reduced Ag/Al₂O₃ catalyst is less active for these reactions. Selectivity to N₂ is also high on the oxidized Ag/Al₂O₃ compared to that on the reduced Ag/Al₂O₃. XRD and SEM studies of these two types of Ag catalysts suggest that oxidation induces an interaction between Ag and the support, where the particles are grown in large size. In contrast, the metallic Ag particles are finely dispersed by the reduction process. Although dispersion of Ag particles is decreased by the oxidation process, the catalytic activity is increased. This suggests that the Ag-alumina sites created in the high temperature oxidizing environment are active in catalytic reduction of NOx. This revised version was published online in July 2006 with corrections to the Cover Date.     

Separation of Polyvinyl Chloride from Plastic Mixture by Froth Flotation after Surface Modification with Ozone

Selective modification by ozonation for the surface of polyvinyl chloride (PVC) was evaluated to separate PVC from the other plastics, polyethylene terephthalate (PET), polycarbonate (PC) and polymethyl methacrylate (PMMA), with almost the same density as PVC by the froth flotation process. Ozonation could selectively decrease the contact angles of flexible PVC from 87.5 degrees to 68.4 degrees and rigid PVC from 90.3 degrees to 66.9 degrees, whereas little decreases in the contact angle were observed for other plastics. This would be due to the replacement of the chloride group on the surface of PVC, into hydrophilic functional groups; carbonyl, carboxyl and ester group. The PVC was successfully separated from the other plastics by the froth flotation process after the selective surface modification by ozonation.     

Influence of activated carbon pore structure on oxygen reduction at catalyst layers supported on rotating disk electrodes

Carbon materials are often used as catalyst supports, and for catalysts in electrodes of a polymer electrolyte fuel cell, carbon black has been used. Recently, it was found, however, that activated carbon could replace carbon black and besides, significantly improve the activity of the electrode catalyst layer for oxygen reduction. In the present study, to optimize the pore structure of activated carbon for further activity improvement, the influence of the pore structure on the activity was investigated using activated carbon of various specific surface areas and mean pore diameters. A catalyst layer was formed from activated carbon loaded with platinum and a polymer electrolyte. The activity of the layer was measured in an oxygen-saturated perchloric acid solution, supporting the layer on a rotating glassy carbon disk electrode. We found that increases in the specific surface area and mean pore diameter increased the activity and that the latter was more effective than the former mainly due to the enhanced mass-transfer in the pores; the catalyst layer formed from activated carbon with the largest mean pore diameter was the most active. Unless pores excessively develop and lose connections between particles, a large pore diameter is therefore desired for the fuel cell electrodes.     

Elevated temperature instrumented Charpy impact of a sintered silicon carbide

A commercially available, densely sintered alpha silicon carbide was tested in air from room temperature to 1700°C using a modified instrumented pendulum unit and standard Charpy size test specimens. The resistance heated silicon carbide specimens exhibited only elastic behavior, even at 1700°C. A compliance analysis of the test revealed a linear elastic decrease of the absorbed impact energy and also a decrease of the fracture stress of the silicon carbide with increasing temperature.