Precise metabolic flux analysis of coryneform bacteria by gas chromatography-mass spectrometry and verification by nuclear magnetic resonance

Precise metabolic flux analysis (MFA) by gas chromatography-mass spectrometry (GC-MS) and computer calculation was performed, and the consistency of the estimated results was verified by independently performed nuclear magnetic resonance (NMR) analysis. The precise estimation of flux by the integration method of the mass isotopomer signal, defined as the coefficient of variance (CV) of multiple determination, was investigated, and the results estimated using different data sets with the same magnitude of error were confirmed. The CV of multiple determinations was sufficiently small to discuss and compare the fluxes of a metabolic pathway. The estimated fluxes using the GC-MS data were cross-validated with the NMR data that were independently measured and not used for MFA. The developed method was successfully applied to the MFA of the growth phase of two different glutamate-producing coryneform bacteria, Corynebacterium glutamicum and C. efficiens. The difference in the growth rate between these two bacterial species was discussed while considering the results of MFA, including forward and backward (exchange) fluxes.     

Observation of the anisotropy of the inelastic scattering of fast electrons accompanied by the K-shell ionization of a carbon nanotube

The angular distribution of inelastically scattered electrons following the carbon K-shell ionization of a carbon nanotube (CNT) has been studied by using an energy-filtered transmission electron microscope. The energy-filtered scattering patterns of the CNT, whose cylindrical axis is oriented in the perpendicular direction with respect to the incident-electron beam, show anisotropic angular distributions caused by the p symmetry in the pi* and sigma* unoccupied states into which a K electron jumps, and the cylindrical shape of the CNT. Corresponding inelastic scattering cross sections, differential in solid angle, have been calculated within the first Born approximation by considering that each carbon atom has three, mutually orthogonal, unoccupied p orbitals, which are oriented in directions perpendicular or parallel to the tube surface. The observed angular patterns agree well with theoretical results, which are linear combinations of the differential cross sections accompanied by the transitions to pi* and sigma* states. A series of the fittings of the experimental patterns at successive values of energy loss provides magnitudes of the pi* and sigma* components, which can be called partial electron energy-loss spectra accompanied by the transitions to the pi* and sigma* states.     

Expression of aldehyde dehydrogenase gene increases hydrogen production from low concentration of acetate by Rhodobacter sphaeroides

Rhodobacter sphaeroides RV (RV) is a hydrogen-producing bacterium exhibiting the highest yield of hydrogen production from organic acids such as lactate and acetate, which are the byproducts of hydrogen fermentation by hydrogen-producing anaerobic bacteria. Co-fermentation of the RV strain with anaerobic bacteria is an efficient method of hydrogen production. However, less than 21 mM acetate is produced by the anaerobic bacteria, which is too low for efficient hydrogen production by the RV strain; it requires approximately 75 mM acetate. In this study, 2 distinct isozymes of aldehyde dehydrogenase from Rhodospirillum rubrum were separately overexpressed in the RV strain. The recombinant RV strains that were designated as RVAD1 and RVAD2, exhibited 13-fold higher ALDH activities than the wild-type RV strain. Hydrogen yields of both of the recombinant strains were 1.4-fold higher than that of the RV strain in 21 mM acetate. In 43 mM acetate, the RVAD1 strain showed higher yield, though the RVAD2 strain showed lower yield as compared to that of the RV strain. In 64 mM acetate and all concentrations of lactate tested (21, 43 and 64 mM), the yields of the recombinant strains were lower than those of the RV strain. The intact (empty) expression plasmid increased the ALDH activity and had little effect on the hydrogen production in acetate, however, it decreased the production in lactate. At the beginning of the fermentation process, when very little hydrogen had been produced, the recombinant strains expressing the ALDH gene consumed smaller amounts of acetate compared to the wild-type strain. We have discussed the effects of ALDH on hydrogen production in this report.     

Physician-received scatter radiation with angiography systems used for interventional radiology: comparison among many X-ray systems

Radiation protection for interventional radiology (IR) physicians is very important. Current IR X-ray systems tend to use flat-panel detectors (FPDs) rather than image intensifiers (IIs). The purpose of this study is to test the hypothesis that there is no difference in physician-received scatter radiation (PRSR) between FPD systems and II systems. This study examined 20 X-ray systems in 15 cardiac catheterisation laboratories (11 used a FPD and 9 used an II). The PRSR with digital cineangiography and fluoroscopy were compared among the 20 X-ray systems using a phantom and a solid-state-detector electronic pocket dosemeter. The maximum PRSR exceeded the minimum PRSR by ~12-fold for cineangiography and ~9-fold for fluoroscopy. For both fluoroscopy and digital cineangiography, the PRSR had a statistically significant positive correlation with the entrance surface dose (fluoroscopy, r = 0.87; cineangiography, r = 0.86). There was no statistically significant difference between the average PRSR of FPDs and IIs during either digital cineangiography or fluoroscopy. There is a wide range of PRSR among the radiography systems evaluated. The PRSR correlated well with the entrance surface dose of the phantom in 20 X-ray units used for IR. Hence, decreasing the dose to the patient will also decrease the dose to staff.     

Differentiation of animal fats from different origins: use of polymorphic features detected by Raman spectroscopy

Food safety requires the development of reliable techniques that ensure the origin of animal fats. In the present work, we try to verify the efficacy of using the polymorphic features of fats for discriminating animal-fat origins. We use Raman spectroscopy to collect the structural information of fat crystals. It is shown that a single Raman band at 1417 cm(-1) successfully differentiates pork fats from beef fats. This band is known to be characteristic of the β'-polymorph of fats. Pork fats show this band because they contain the β'-polymorph after rapid cooling to 0 °C. In beef-pork-fat mixtures, this band is not detected even in the presence of 50% pork fat; an addition of beef fat to pork fat is likely to produce a mixed fat with a completely different polymorphic behavior. This method seems to have the potential to detect beef products contaminated with pork-adipose tissue.     

Status and research programs of the multinuclide accelerator mass spectrometry system at the University of Tsukuba

We present the current status and research programs of a multinuclide accelerator mass spectrometry (AMS) system on the 12UD Pelletron tandem accelerator at the University of Tsukuba (Tsukuba AMS system), Japan. A maximum terminal voltage of 12 MV is available for the AMS system. The Tsukuba AMS system can measure environmental levels of long-lived radioisotopes of ¹⁴C, ²⁶Al, ³⁶Cl and ¹²⁹I by employing a molecular pilot beam. Recently, enhancements in AMS techniques and equipment, including sample preparation, the ion source and the data acquisition system, have improved the performance of ³⁶Cl-AMS. The standard deviation of fluctuations is typically ±2%, and the machine background level for the ³⁶Cl/Cl ratio is lower than 1 × 10^?15 with a halite sample. We have measured over 500 samples in 1 year, including samples for earth and environmental sciences and nuclear safety research.     

Empirical study on the environmental Kuznets curve for CO2 in France: The role of nuclear energy

This paper attempts to estimate the environmental Kuznets curve (EKC) in the case of France by taking the role of nuclear energy in electricity production into account. We adopt the autoregressive distributed lag (ARDL) approach to cointegration as the estimation method. Additionally, we examine the stability of the estimated models and investigate the Granger causality relationships between the variables in the system. The results from our estimation provide evidence supporting the EKC hypothesis, and the estimated models are shown to be stable over the sample period. The uni-direction running from other variables to CO₂ emissions are confirmed from the casualty tests. Specifically, the uni-directional causality relationship running from nuclear energy to CO₂ emissions statistically provides evidence on the important role of nuclear energy in reducing CO₂ emissions.     

Development of a low-energy high resolution X-ray camera for high-energy gamma photon background environments

Although a high-energy gamma camera can obtain images of ¹³⁷Cs distribution by detecting the 662-keV gamma photons, its spatial resolution is reduced because high-energy gamma photons penetrate the edge of the pinhole collimator. To solve this problem, we developed a low-energy X-ray camera that detects the characteristic X-ray photons (32–37 keV) that are emitted from ¹³⁷Cs to obtain high resolution images. We used a 45 × 45 × 1-mm-thick NaI(Tl) scintillator that was encapsulated in 0.1-mm-thick aluminum and optically coupled to a 2-inch square, position sensitive photomultiplier tube (Hamamatsu Photonics, PSPMT:H12700 MOD) as an imaging detector. The imaging detector was encased in a 2-cm-thick tungsten alloy container and a pinhole collimator was attached to its camera head. The spatial resolution and sensitivity were ～5 mm full-width at half-maximum and ～0.6 cps/MBq for the 1.5-mm pinhole collimator 10 cm from the collimator surface, respectively. We administered 5 MBq of ¹³⁷Cs to a soybean seedling, imaged the distribution of radionuclides for six hours, and successfully obtained a high resolution image of it with our developed X-ray camera. We believe our camera will be a powerful tool for such ¹³⁷Cs imaging in plants.     

Skin Permeation of Lidocaine from Crystal Suspended Oily Formulations

ABSTRACT

In vitro permeation of lidocaine (lidocaine base, LID) through excised rat skin was investigated using several LID-suspended oily formulations. The first skin permeation of LID from an LID-suspended oily solution such as liquid paraffin (LP), isopropyl myristate (IPM), polyoxyethylene (2) oleylether (BO-2), and diethyl sebacate (DES) was evaluated and compared with that from polyethylene glycol 400 (PEG400) solution, a hydrophilic base. The obtained permeation rate of LID, J_app, from PEG400, LP, IPM, BO-2, and DES was in the order of DES>BO-2 = IPM>LP>PEG400, and increased with LID solubility in the oily solvents, although LID crystals were dispersed in all solvents. Subsequently, oily formulations that consisted of different ratios of the first oily solvent (IPM, BO-2, or DES) (each 0–20%), the second oily solvent (LP) and an oily mixture of microcrystalline wax/white petrolatum/paraffin (1/5/4) were evaluated. BO-2 groups at a concentration of 5% and 10% had the highest J_app among the oily formulations, although a higher BO-2 resulted in lower skin permeation. In addition, pretreatment with BO-2 increased the skin permeation of LID. These results suggest that the penetration enhancing effect by the system may be related to the skin penetration of BO-2 itself. Finally, mathematical analysis was done to evaluate the effect of BO-2, and it was shown that BO-2 improved the LID solubility in stratum corneum lipids to efficiently enhance the LID permeation through skin.     

Room-temperature growth of AlN/TiN epitaxial multi-layer by laser molecular beam epitaxy

We have fabricated epitaxial AlN thin films at room temperature on sapphire (0001) substrates with a TiN (111) epitaxial buffer layer by pulsed laser deposition in ultra-high vacuum (laser molecular beam epitaxy method). The TiN buffer layers were also fabricated at room temperature. Four-circle X-ray diffraction analysis and reflection high-energy electron diffraction results indicate the heteroepitaxial structure of AlN (0001)/TiN (111)/sapphire (0001) with the epitaxial relationship of AlN [10-10]||TiN [11-2]||sapphire [11-20]. The surface of the room-temperature grown AlN film was found to be atomically flat, reflecting the nano-stepped surface of ultrasmooth sapphire substrates. Then, we could achieve the room-temperature epitaxial growth of [AlN/TiN] multi-layer. The temperature dependence of resistivity of the AlN/TiN multi-layer film was also measured.