Application of finite fourier transformation for the solution of the diffusion equation

Application of the finite Fourier transformation is discussed for the solution of the diffusion equation in one dimension, two dimensional x-y and triangular geometries. It can be shown that the equation by the Nodal Green's function method in Cartesian coordinate can be derived as a special case of the finite Fourier transformation method.     

Individual and combined effects of water quality and empty bed contact time on As(V) removal by a fixed-bed iron oxide adsorber: Implication for silicate precoating

The individual and combined effects of changes in water quality (i.e. pH, initial concentrations of arsenate (As(V)) and competing ions) and empty bed contact time (EBCT) on As(V) removal performance of a fixed-bed adsorber (FBA) packed with a nanostructured goethite-based granular porous adsorbent were systematically studied under environmentally relevant conditions. Rapid small scale column tests (RSSCTs) were extensively conducted at different EBCTs with synthetic waters in which pH and the concentrations of competing ions (phosphate, silicate, and vanadate) were controlled. In the absence of the competing ions, the effects of initial As(V) concentration, pH, and EBCT on As(V) breakthrough curves were successfully predicted by the homogeneous surface diffusion model (HSDM) with adsorption isotherms predicted by the extended triple layer model (ETLM). The interference effects of silicate and phosphate on As(V) removal were strongly influenced by pH, their concentrations, and EBCT. In the presence of silicate (≤21 mg/L as Si), a longer EBCT surprisingly resulted in worse As(V) removal performance. We suggest this is because silicate, which normally exists at much higher concentration and moves more quickly through the bed than As(V), occupies or blocks adsorption sites on the media and interferes with later As(V) adsorption. Here, an alternative operating scheme of a FBA for As(V) removal is proposed to mitigate the silicate preloading. Silicate showed a strong competing effect to As(V) under the tested conditions. However, as the phosphate concentration increased, its interference effect dominated that of silicate. High phosphate concentration (>100 μg/L as P), as experienced in some regions, resulted in immediate As(V) breakthrough. In contrast to the observation in the presence of silicate, longer EBCT resulted in improved As(V) removal performance in the presence of phosphate. Vanadate was found to compete with As(V) as strongly as phosphate. This study reveals the competitive interactions of As(V) with the competing ions in actual adsorptive treatment systems and the dependence of optimal operation scheme and EBCT on water quality in seeking improved As(V) removal in a FBA.     

Development of a new X-ray source using backscattered X-ray with the use of a cold cathode

The development of an intense X-ray source using backscattered X-ray produced using an advanced electrode configuration is described. The electrodes were composed of field emitters deposited on a wire mounted on a perforated plate as the cathode and a copper plate as the anode. Electrons from these emitters collided with the copper plate and X-ray was generated at collision points. The backscattered X-ray in the direction normal to the electron trajectory through a hole in the anode escaped from the vacuum chamber through a beryllium window. Continuous and characteristic X-rays were detected at an applied voltage lower than that of a conventional X-ray source from 3.0 to 9.4 kV, respectively. Moreover, the X-ray dosage measured with a survey meter reached 0.95 mSv/h at 5.0 kV of applied voltage. The transmission images of three types of material used as an X-ray source for the X-ray imaging system indicate three advantages; low power consumption, focal point controllable by adjusting applied voltage, and photographable motion picture of X-ray transmission.     

水环境对热塑性复合材料层合板分层疲劳裂纹扩展的影响

本文研究了水环境对ICIAPC-2热塑性预浸料(AS4/PEEK)制成的单向复合材料层合板分层疲劳裂纹扩展的影响.用双悬臂梁试件进行了I型张开位移加载试验.试验环境为23℃水中和50℃水中.水环境未引起很大的不利影响.用电子显微镜和机理分析讨论了水环境对CF/PEEK和CF/环氧两种层合板的差异.     

Short‐span seeking control of hard disk drive with vibration suppression PTC

In a short‐span seeking‐mode of hard disk drives, the resonance modes are getting crucial obstruction to meet the demand on high‐speed data access. In this paper, a novel vibration suppression perfect tracking control (PTC) method is proposed based on controllable canonical realization. In the proposed method, it is assumed that the plant is modeled as the rigid and primary resonance mode. By using this model, the feed forward controller is designed with PTC by multirate sampling control in order to suppress the primary vibration. Additionally, the higher‐order resonance vibration is attenuated by using the trajectory MHVT. The proposed method achieved 16% faster seeking than MPVT, a conventional method. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(1): 66–72, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20546     

The JUSTSAP experiment on STS-95

An instrumented flow cell in the form of a cylinder with differentially heated end walls and adiabatic sidewalls was flown on STS-95 as the Japan-US Thermal Science Accelerometer Project (JUSTSAP). The purpose of the experiment was to map disturbances in the thermal field during the course of a Shuttle mission in order to correlated them with various mission events and to determine if any global transport could be detected from second order, non-zero time average flows resulting from periodic accelerations (g-jitter). Significant disturbances in the thermal field were noted each time the Shuttle changed attitude, such as the maneuver to -Z solar inertial, which is done periodically for thermal conditioning. Burns from the main thrusters associated with the launch and retrieval of the Spartan satellite produced overturning flows, as might be expected. During extended periods in which the attitude was held constant, the perturbations to the thermal field correlate extremely well with calculated accelerations from gravity gradient and drag. Fair agreement was found between the observed temperature perturbations and those predicted from a modification of the analytical model developed by Bejan and Tien (B&T) for the flow and heat transfer in an infinite cylinder with a constant axial thermal gradient. A full three-dimensional computational fluid dynamic analysis with more realistic thermal boundary conditions provided better agreement after adjustments were made to account for the heat flow away from the measuring thermistors. Once calibrated with a reliable thermal model, the flow cell was found to serve as a high-precision accelerometer, capable of measuring the quasi-steady acceleration with a sensitivity of better than 0.1 micro-g in the presence of the higher amplitude g-jitter typical of Shuttle operations. Further, it was found that the gravity gradient acceleration accounted for virtually all of the observed quasi-steady accelerations during such extended periods. The thermal response time of the JUSTSAP was too slow to expect to see the effects of fluctuating first order flows resulting from the vibrational environment of the Shuttle. However, an indication of a change in the thermal field near the ends of the flow cell was seen during periods of crew exercise that may possibly be attributed to circulating eddies resulting from the higher order terms in the momentum equation. At higher amplitudes, these second order effects can produce non-zero time average flows of a global nature, as can the start-up transients in first-order periodic flows. No such effects were observed, thus it is possible to place an upper limit on the integrated power spectral density of the vibrational environment experienced as well as the nature of the start-up transients of the periodic flows.     

Lysophosphatidylinositol Induced Morphological Changes and Stress Fiber Formation through the GPR55-RhoA-ROCK Pathway

We previously reported that lysophosphatidylinositol (LPI) functions as an endogenous agonist of GPR55, a novel cannabinoid receptor. However, the physiological roles of LPI-GPR55 have not yet been elucidated in detail. In the present study, we found that LPI induced morphological changes in GPR55-expressing HEK293 cells. LPI induced the cell rounding of GPR55-expressing HEK293 cells but not of empty-vector-transfected cells. LPI also induced the activation of small GTP-binding protein RhoA and increased stress fiber formation in GPR55-expressing HEK293 cells. The inhibition of RhoA and Rho kinase ROCK by the C3 exoenzyme and the ROCK inhibitor reduced LPI-induced cell rounding and stress fiber formation. These results clearly indicated that the LPI-induced morphological changes and the assembly of the cytoskeletons were mediated through the GPR55-RhoA-ROCK pathway.     

Observations of seismic electromagnetic phenomena in VHF band by dual frequency method

Seismic electromagnetic (EM) phenomena have been observed at many laboratories with specially designed systems. Recently we can utilize radio receivers, personal computers, and communication systems with higher performances and reasonable cost. It is possible to observe seismic EM phenomena not only by specially designed systems but also by a simple observation system integrated by these devices and systems. We have created an observation system for seismic EM phenomena with them in the very high frequency (VHF) band, from 76 MHz to 90 MHz, assigned for FM broadcasting exclusive use in Japan. We are surrounded by many EM waves, such as broadcasting, communication usage, and man‐made noises. Thus, we have newly developed the dual frequency observation method. In this paper, we describe an observation method that can identify whether a received signal is a broadband EM wave or an artificial FM radio wave. Next, the observation results for broadband EM waves from galactic noise and solar flares are presented. Then, the observation results for FM radio waves reflected from sporadic E layer and the Leonid meteors are shown. Finally, the observation results for the detected broadband EM waves associated with the Geiyo earthquake are described. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(4): 36–44, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20350