Base metal Co-fired (Na,K)NbO3 structures with enhanced piezoelectric performance

A NaF-Nb₂O₅ flux doped (Na,K)NbO₃ (NKN) based lead-free ceramic was successfully co-fired with nickel inner electrodes in reduced atmospheres. No chemical reactions and/or inter-diffusion were detected at the interface between the nickel (Ni) electrodes and the NKN-based piezoelectrics. Dielectric, resistivity, and electromechanical performance were measured with processing under different firing conditions and flux additions to obtain high densities. Ceramics are obtained with submicron grain structures with the NaF-Nb₂O₅ sintering aids (2 and 4 wt%) fluxes, and high densities when firing at low pO₂ (10^?10 atms) atmospheres at sintering temperatures ~1150 °C for 2 hours. High resistivities and low losses can be obtained through a second annealing condition at 850 °C and 10^?7 atms at 8 hours. High d ₃₃ values (over 350 pm/V) determined under unipolar converse electromechanical measurements were obtained in the simple prototyped co-fired structures to show feasibility towards base metal electrodes in multilayer actuators.     

Effects of species and moisture content on penetration of liquid in laser incised lumber by the passive impregnation method

Penetration of liquid by passive impregnation method for Douglas-fir (Pseudotsuga menziesii Franco), sugi (Cryptomeria japonica D. Don) and Japanese larch (Larix leptolepis Gordon) was studied. Effects of initial moisture content of sugi (16, 43 and 70% moisture content) on liquid penetration were also studied. Dried Douglas-fir (mc=14%) and sugi (mc=16%), and green Japanese larch (mc=45%) and sugi (mc=70%) were treated by passive impregnation method for penetration analysis. It was observed that dried sugi had the highest level of liquid penetration both in length (170 mm) and width (8 mm) for all measured sections followed by green sugi, green Japanese larch and dried Douglas-fir. In case of different initial moisture content, the highest absorption (624 kg/m³) and penetration (maximum 87 and 96% at cross and longitudinal surfaces, respectively) was observed for sugi having the lowest initial moisture content under the same passive impregnation conditions. Absorption and penetration decreased with the increase of initial moisture content for sugi. These results could help in designing incising pattern and density, as well as solving the problems related to high initial moisture content of wood for passive impregnation.     

High-performance polymer photovoltaic devices with inverted structure prepared by thermal lamination

Use of a lamination process for the introduction of Au electrode, instead of conventional metal evaporation, improved the power conversion efficiency (PCE) of inverted-structure photovoltaic devices from 1.6% to 2.6% based on a bulk heterojunction of poly(3-hexylthiophene) (P3HT) and (6,6)-phenyl C₆₁ butyric acid methyl ester (PCBM). X-ray photoelectron spectroscopy indicated that a thin layer of P3HT is spontaneously formed at the air/polymer blend layer interface during the spin-coating process. It is suggested that the vacuum-evaporated gold could destroy the surface-segregated thin layer of P3HT, while the lamination process preserves the surface structure working as an electron-blocking layer. The insertion of a PEDOT:PSS layer, between the metal electrode and polymer layer, in the lamination process further improved the PCE to 3.3% with a short-circuit current density of 9.94 mA cm⁻², an open-circuit voltage of 0.60 V, and a fill factor of 55% under AM1.5 100 mW cm⁻² irradiation.     

Power reduction techniques for a 1-Mb ECL-CMOS SRAM with an accesstime of 550 ps and an operating frequency of 900 MHz

This paper describes power reduction circuit techniques in an ultra-high-speed emitter-coupled logic (ECL)-CMOS SRAM. Introduction of a 0.25-μm MOS transistor allows a Y decoder and a bit-line driver to be composed of CMOS circuits, resulting in a power reduction of 34%. Moreover, a variable-impedance load has been proposed to reduce cycle time. A 1-Mb ECL-CMOS SRAM was developed by using these circuit techniques and 0.2-μm BiCMOS technology. The fabricated SRAM has an ultrafast access time of 550 ps and a high operating frequency of 900 MHz with a power dissipation of 43 W     

FDTD simulation of nonlinear ultrasonic pulse propagation in ESWL using equations including Lagrangian

A new FDTD algorithm is proposed for analyzing ultrasonic pulse propagation in the human body, a problem connected with ESWL (extracorporeal shock wave lithotripsy). In this method, we do not use plane wave approximation but directly employ the original equations, taking into account the Lagrangian to derive new FDTD algorithms. This method is applied to an experimental setup and its numerical model that resembles an actual treatment situation in order to compare the sound pressure distributions obtained numerically with those obtained experimentally. The present method is shown to give clearly better results than the earlier method, from the point of view of the numerical reappearance of a strongly nonlinear waveform. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 169(4): 29–36, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20819     

Optimal conditions to induce rat adrenal medullary changes, such as pheochromocytoma, by nicotine

AIMS: Dihydrocodeine is metabolized to dihydromorphine via the isoenzyme cytochrome P450 2D6, whose activity is determined by genetic polymorphism. The importance of the dihydromorphine metabolites for analgesia in poor metabolizers is unclear. The aim of this study was to assess the importance of the dihydromorphine metabolites of dihydrocodeine in analgesia by investigating the effects of dihydrocodeine on somatic and visceral pain thresholds in extensive and quinidine-induced poor metabolizers. METHODS: Eleven healthy subjects participated in a double-blind, randomized, placebo-controlled, four-way cross-over study comparing the effects of single doses of placebo and slow-release dihydrocodeine 60 mg with and without premedication with quinidine sulphate 50 mg on electrical, heat and rectal distension pain tolerance thresholds. Plasma concentrations and urinary excretion of dihydrocodeine and dihydromorphine were measured. RESULTS: In quinidine-induced poor metabolizers the plasma concentrations of dihydromorphine were reduced between 3 and 4 fold from 1.5 h to 13.5 h after dosing (P < 0.005) and urinary excretion of dihydromorphine in the first 12 h was decreased from 0.91% to 0.28% of the dihydrocodeine dose (P < 0.001). Dihydrocodeine significantly raised the heat pain tolerance thresholds (at 3.3 h and 5 h postdosing, P < 0.05) and the rectal distension defaecatory urge (at 3.3 h and 10 h postdosing, P < 0.02) and pain tolerance thresholds (at 3.3 h and 5 h postdosing, P < 0.05) compared with placebo. Premedication with quinidine did not change the effects of dihydrocodeine on pain thresholds, but decreased the effect of dihydrocodeine on defaecatory urge thresholds (at 1.5 h, 3.3 h and 10 h postdosing, P < 0.05). CONCLUSIONS: In quinidine-induced poor metabolizers significant reduction in dihydromorphine metabolite production did not result in diminished analgesic effects of a single dose of dihydrocodeine. The metabolism of dihydrocodeine to dihydromorphine may therefore not be of clinical importance for analgesia. This conclusion must however, be confirmed with repeated dosing in patients with pain.     

Optical properties of fluorinated silicon oxide films by liquidphase deposition for optical waveguides

Optical properties of fluorinated silicon oxide (SiOF) films for optical waveguide in optoelectronic devices were investigated. The SiOF films are formed at 25°C by a liquid phase deposition (LPD) technique using a supersaturated hydrofluosilicic acid (H₂SiF ₆) aqueous solution. Two main absorption peaks corresponding to Si-O and Si-F bonds were observed at the wavenumbers of 1090 and 930 cm^-1 in Fourier transform infrared (FTIR) spectrum, respectively. The LPD-SiOF films show very little content of water components such as Si-OH bonds and OH group. Although the transmittance for 600-nm-thick LPD-SiOF film gradually decreased from the wavelength around 700 nm, the relative transmittances to quartz glass are over 98% in the wavelength region from 350-2500 nm. The concentration of fluorine atoms in the LPD-SiOF film was about 5%, and the calculated composition was SiO_1.85F_0.15. The calculated refractive index from the polarizability for LPD-SiOF film was 1.430, and agrees very well with the measured value at the wavelength of 632.8 nm by ellipsometry. The dispersion of refractive index was evaluated and fitted to a three-term Sellmeier's dispersion equation. The zero dispersion wavelengths for the LPD-SiOF and thermally grown SiO₂ films were 1.271 and 1.339 μm, respectively     

Short‐span seeking control of hard disk drive with vibration suppression PTC

In a short‐span seeking‐mode of hard disk drives, the resonance modes are getting crucial obstruction to meet the demand on high‐speed data access. In this paper, a novel vibration suppression perfect tracking control (PTC) method is proposed based on controllable canonical realization. In the proposed method, it is assumed that the plant is modeled as the rigid and primary resonance mode. By using this model, the feed forward controller is designed with PTC by multirate sampling control in order to suppress the primary vibration. Additionally, the higher‐order resonance vibration is attenuated by using the trajectory MHVT. The proposed method achieved 16% faster seeking than MPVT, a conventional method. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(1): 66–72, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20546     

N-Alkylation of chitin and some characteristics of the novel derivatives

Summary Introduction of simple alkyl groups at the C-2 nitrogen of chitin and some properties of the resulting N-alkyl-chitins have been examined. Chitosan was fully deacetylated and treated with three kinds of aldehydes, formaldehyde, acetaldehyde, and pentanal. The Schiff bases of chitosan, whose extents of substitution were dependent on the amount of aldehydes, were reduced with sodium cyanoborohydride to N-alkylated chitosans. The N-alkyl-chitosans were then transformed into the corresponding N-alkyl-chitins by acetylation with acetic anhydride followed by transesterification to remove partly formed O-acetyl groups. The resulting N-methyl-, ethyl-, and pentyl-chitins were amorphous and showed improved affinity for organic solvents. Received: 13 December 2001/Revised version: 11 January 2002/Accepted: 17 January 2002