An EDTA-associated anti-B agglutinin: the role of ionized calcium

BACKGROUND: It is believed that EDTA-dependent panagglutination is associated with free carboxylic acids that support reactions of rare autoagglutinins. CASE REPORT: An ABO typing discrepancy occurred in an 88-year-old patient. The specificity of his autoagglutinin was demonstrated by panel cell study and absorption tests using normal donors' red cells or immunoadsorbents coated with A, B, or O substances. Inhibition assays were performed to determine whether the autoagglutinin was inhibited by ionized calcium or carboxylic acids. The autoagglutinin had anti-B specificity when tested in the presence of EDTA. It was neutralized by group B secretor saliva and adsorbed by crystalline silica coated with simple B substances with or without EDTA, although it was absorbed by group B red cells only in the presence of EDTA. The agglutinating activity was stronger at 25 degrees C (titer 64) than at 37 degrees C (titer 16) and was destroyed by treatment of the serum with dithiothreitol, which suggests that the autoagglutinin is IgM. This activity also appeared in the patient's serum after dialysis and in an eluate obtained after adsorption with simple B substances, and it was inhibited by the addition of CaCl2 at 0.5 mM or higher concentrations. This suggests that the agglutination is not dependent on EDTA but, rather, on the concentration of ionized calcium. The autoagglutinin failed to react with group B red cells treated with glutaraldehyde for 10 minutes. CONCLUSION: An anti-B autoagglutinin was shown to have caused an ABO typing discrepancy in the presence of EDTA. These results suggest that autoagglutination requires an environment with low levels of ionized calcium, but not the presence of carboxyl groups.     

Application of finite fourier transformation for the solution of the diffusion equation

Application of the finite Fourier transformation is discussed for the solution of the diffusion equation in one dimension, two dimensional x-y and triangular geometries. It can be shown that the equation by the Nodal Green's function method in Cartesian coordinate can be derived as a special case of the finite Fourier transformation method.     

Changes in the amounts of water-soluble umami-related substances in porcine longissimus and biceps femoris muscles during moist heat cooking

Time course changes in amounts of glutamic acid, total free amino acid, inosine monophosphate (IMP), and 2%-trichloroacetic acid-soluble oligopeptides in whole, muscle only, and cooking juice during wet-heat cooking in pork longissimus and biceps femoris muscles were investigated because the movements of umami-relevant substances during cooking treatment had not previously been clarified in detail. The amounts of glutamic acid, total free amino acid, and IMP significantly (P<.05) decreased and increased in muscle and cooking juice during 180min of cooking, respectively. The whole amounts of glutamic acid and total free amino acid remained unchanged during cooking treatment. The whole amount of IMP, however, increased significantly at 10min of cooking (P<.05) and was maintained after the 10-min period. The extramuscular oligopeptides amount increased significantly in response to the cooking treatment (P<.05). The intramuscular amount of oligopeptides decreased at 30min of cooking but increased significantly (P<.05) after 60min. The whole meat oligopeptides amount increased significantly during a 180-min cooking treatment (P<.05). These results indicate that glutamate, total free amino acid, and IMP were released from the muscle during cooking, and that IMP levels increased in the initial phase of cooking. In addition, oligopeptides increased during wet-heat cooking of pork muscles.     

Base metal Co-fired (Na,K)NbO3 structures with enhanced piezoelectric performance

A NaF-Nb₂O₅ flux doped (Na,K)NbO₃ (NKN) based lead-free ceramic was successfully co-fired with nickel inner electrodes in reduced atmospheres. No chemical reactions and/or inter-diffusion were detected at the interface between the nickel (Ni) electrodes and the NKN-based piezoelectrics. Dielectric, resistivity, and electromechanical performance were measured with processing under different firing conditions and flux additions to obtain high densities. Ceramics are obtained with submicron grain structures with the NaF-Nb₂O₅ sintering aids (2 and 4 wt%) fluxes, and high densities when firing at low pO₂ (10^?10 atms) atmospheres at sintering temperatures ~1150 °C for 2 hours. High resistivities and low losses can be obtained through a second annealing condition at 850 °C and 10^?7 atms at 8 hours. High d ₃₃ values (over 350 pm/V) determined under unipolar converse electromechanical measurements were obtained in the simple prototyped co-fired structures to show feasibility towards base metal electrodes in multilayer actuators.     

Speech recognition in living rooms: Integrated speech enhancement and recognition system based on spatial,spectral and temporal modeling of sounds

Research on noise robust speech recognition has mainly focused on dealing with relatively stationary noise that may differ from the noise conditions in most living environments. In this paper, we introduce a recognition system that can recognize speech in the presence of multiple rapidly time-varying noise sources as found in a typical family living room. To deal with such severe noise conditions, our recognition system exploits all available information about speech and noise; that is spatial (directional), spectral and temporal information. This is realized with a model-based speech enhancement pre-processor, which consists of two complementary elements, a multi-channel speech–noise separation method that exploits spatial and spectral information, followed by a single channel enhancement algorithm that uses the long-term temporal characteristics of speech obtained from clean speech examples. Moreover, to compensate for any mismatch that may remain between the enhanced speech and the acoustic model, our system employs an adaptation technique that combines conventional maximum likelihood linear regression with the dynamic adaptive compensation of the variance of the Gaussians of the acoustic model. Our proposed system approaches human performance levels by greatly improving the audible quality of speech and substantially improving the keyword recognition accuracy.     

Treatment of Groundwater Contaminated with 1,4-Dioxane,Tetrahydrofuran, and Chlorinated Volatile Organic Compounds Using Advanced Oxidation Processes

Ozonation and four types of advanced oxidation processes, including O₃/H₂O₂, O₃/UV, O₃/H₂O₂/UV, and UV/H₂O₂, were evaluated for the treatment of contaminated groundwater at a Superfund site in Simpsonville, South Carolina using bench-scale, batch ozone and UV apparatuses. Although the contaminants of concern were 1,4-dioxane, 1,1-dichloroethene, and trichloroethene, several other chlorinated organics as well as tetrahydrofuran were found in the groundwater samples. The O₃/H₂O₂ treatment with O₃ and H₂O₂ doses of 6 and 1.5 mg/L, respectively, and the UV/H₂O₂ treatment with UV and H₂O₂ doses of 1,000 mJ/cm and 20 mg/L, respectively, were sufficient to degrade 200 µg/L of 1,4-dioxane, 110 µg/L of 1,1-dichloroethene, and 10 µg/L of trichloroethene below their performance standards of 10, 7, and 4 µg/L, respectively. Due to a high bromide concentration (0.35 mg/L) in the groundwater sample, bromate formation was found to be significant in ozone-based treatment, including O₃/H₂O₂.     

Novel High‐Temperature Antiferroelectric‐Based Dielectric NaNbO3–NaTaO3 Solid Solutions Processed in Low Oxygen Partial Pressures

The (1?x)NaNbO₃–(x)NaTaO₃ solid solution was investigated for x ≤ 0.4 in terms of new high‐temperature and high‐permittivity dielectric system that is suitable for base metal inner electrode capacitor applications. The addition of Ta significantly enhanced the resistivity of the dielectric, resulting in superior resistivity than the dielectrics‐formulated BaTiO₃ systems that dominate the multilayer ceramic capacitor dielectric devices. The voltage dependence of the permittivity was also superior to BaTiO₃‐based materials, providing higher capacitance at higher temperatures. A transmission electron microscopy study illustrated that the grains had so‐called core‐shell structure. According to the electron diffraction analysis, the core region had an inhomogeneous structure between antiferroelectric and ferroelectric phases, and shell region had an incommensurate ferroelectric‐like structure. The core and shell region had Nb‐ and Ta‐rich composition, respectively, and their interface was compositionally sharp, implying that shell region was formed via a liquid phase during the sintering process with an incongruent Ta dissolution reprecipitation. We anticipate that these or similar materials based on the alkali‐niobate perovskites can be further enhanced to provide capacitor solutions from 150°C to 250°C, which is an important range for a number of new AC–DC invertor and engine control units.     

Development of a strain for efficient degradation of polychlorinated biphenyls by patchwork assembly of degradation pathways

Rhodococcus jostii RHA1 accumulates chlorobenzoates (CBA) during the degradation of polychlorinated biphenyls (PCBs). CBA degradation is considered one of the rate-limiting steps in the complete degradation of PCBs. To reduce the accumulation of CBAs, the upper pathway enzyme genes for PCB degradation of RHA1 were introduced into a CBA-degrading bacterium, Burkholderia sp. NK8. The resulting recombinant strain exhibited no biphenyl 2,3-dioxygenase (BphA) activity encoded by bphAaAbAcAd genes, which encode the large and small subunits of the terminal oxygenase component and the ferredoxin and reductase subunits responsible for electron transfer from NADH to the large subunit. The remaining enzyme genes involved in the transformation of biphenyl to benzoate, bphB2C1D1, which encode dehydrogenase, ring-cleavage dioxygenase and hydrolase, conferred activities to NK8. To obtain the BphA activity of RHA1 in NK8, sets of BphA genes were constructed by combining the bphAaAbAcAd genes of RHA1 and bphA3A4 of Pseudomonas pseudoalcaligenes KF707, encoding the ferredoxin and reductase subunits. Hybrid derivatives of BphA containing the KF707 bphA3 conferred BphA activity to NK8, and a derivative containing the RHA1 bphAaAb and KF707 bphA3A4 genes exhibited the highest BphA activity. A plasmid containing the RHA1 bphAaAb and KF707 bphA3A4 genes plus the RHA1 bphB2C1D1 genes was constructed and introduced into NK8. The resulting recombinant strain efficiently degraded 2-, 3- and 4-chlorobiphenyls with an apparent reduction in CBA accumulation in comparison to the recombinant mutant strain, which had an insertion in the cbeA gene to inactivate CBA dioxygenase.     

Separation of Ru(III), Rh(III) and Pd(II) from nitric acid solutions using ion-exchange resins bearing carboxylic betaine

To understand the adsorption properties of a styrene–divinylbenzene copolymer functionalized with N,N,N-trimethylglycine, AMP03, the adsorption behaviours for platinoid ions (Ru(III), Rh(III) and Pd(II)) were examined. Furthermore, we performed adsorption experiments using sample solutions by adding triethylamine, thiourea and N,N,N-trimethylglycine. Based on the adsorption data obtained in this study, we performed chromatographic experiments. The results indicated that all platinoid ions in the feed solution completely adsorbed on AMP03, and almost 80% of the adsorbed platinoid ions were recovered. These results show that AMP03 has the potential to recover Ru(III), Rh(III) and Pd(II) from high-level liquid waste.