Aqueous phase synthesized CdSe magic-sized clusters: solution composition dependence of adsorption layer structure

We report dispersion solution composition dependence of the adsorption layer structure and the physical and optical properties of aqueous phase-synthesized semiconductor nanoparticles (NPs). We synthesized cysteine (Cys)-capped CdSe NPs with well-defined core structures, dispersed them in a series of aqueous solutions with different compositions, and then investigated their adsorption layer structure and physical and optical properties. Each CdSe NP consisted of a (CdSe)33 or (CdSe)34 magic-sized cluster (d - 1.45 nm) core, a ligand-Cys shell, and an adsorption layer. The dispersion solution composition strongly affected the adsorption layer structure of the CdSe NPs. The solution with a composition close to that of the as-prepared solution stabilized the physical and optical properties of the NPs. The solution with a composition different from that of the as-prepared solution, however, resulted in large changes in their adsorption layer structure and thus their physical and optical properties. The solution composed of neutral or weakly charged Cys and Cd-Cys complexes led to the adsorption layer with low charge density and that destabilized the NPs. The solution containing only neutral or weakly charged forms of Cys, without Cd-Cys complexes, was favorable to the formation of a thick adsorption layer with low charge density and that destabilized the NPs. The amount of adsorbed Cys in the adsorption layer depended on the dispersion solution composition. However, the amount of adsorbed Cd-Cys complexes in the adsorption layer was almost constant regardless of the dispersion solution composition.     

Photocatalytic activity of low temperature oxidized Ti–6Al–4V

Numerous advanced surface modification techniques exist to improve bone integration and antibacterial properties of titanium based implants and prostheses. A simple and straightforward method of obtaining uniform and controlled TiO₂ coatings of devices with complex shapes is H₂O₂-oxidation and hot water aging. Based on the photoactivated bactericidal properties of TiO₂, this study was aimed at optimizing the treatment to achieve high photocatalytic activity. Ti–6Al–4V samples were H₂O₂-oxidized and hot water aged for up to 24 and 72 h, respectively. Degradation measurements of rhodamine B during UV-A illumination of samples showed a near linear relationship between photocatalytic activity and total treatment time, and a nanoporous coating was observed by scanning electron microscopy. Grazing incidence X-ray diffraction showed a gradual decrease in crystallinity of the surface layer, suggesting that the increase in surface area rather than anatase formation was responsible for the increase in photocatalytic activity.     

Radiolabeled gelatin type B analogues can be used for non-invasive visualisation and quantification of protein coatings on 3D porous implants

This study covers the quantification of the covalent attachment of gelatin type B (GelB) and the subsequent adsorption of Fibronectin (Fn) on poly-ε-caprolactone (PCL) surfaces, functionalised with 2-aminoethyl methacrylate (AEMA) by means of post-plasma UV-irradiation grafting. As typical surface characterisation tools do not allow quantification of deposited amounts of GelB or Fn, radiolabeled analogues were used for direct measurement of the amount of immobilized material. Bolton-Hunter GelB (BHG) and Fn were radioiodinated with (131)I and (125)I respectively and S-Hynic GelB (SHG) was labeled with (99m)Tc. Immobilisation of (131)I-BHG or (99m)Tc-SHG on both PCL and PCL-AEMA scaffolds was performed in analogy with earlier work. SPECT images on scaffolds coated with (99m)Tc-SHG conjugates were acquired on a U-SPECT II camera. There was a clear difference in the amount of deposited (131)I-BHG between blanco and AEMA-grafted PCL on 2D samples. No significant differences in immobilization behaviour were observed between (99m)Tc-SHG and (131)I-BHG. Subsequent immobilisation of Fn was successful and depended on the amounts of deposited GelB. SPECT imaging on cylindrical 3D scaffolds confirmed these findings and showed that the amount of immobilized (99m)Tc-SHG was depth dependant. The architecture of the scaffolds strongly influences the distribution of GelB within these structures. Furthermore, there is a clear difference in the homogeneity of the protein coating when different GelB immobilization protocols were applied. This study shows that radiolabeled compounds are a rapid and accurate tool in the quantitative and qualitative evaluation of the biofunctionalisation of AEMA grafted PCL scaffolds.     

Synthesis of a lithium-encapsulated fullerenol and the effect of the internal lithium cation on its aggregation behavior

A lithium-encapsulated fullerenol Li@C₆₀(OH)₁₈, as an example of a polar solvent-soluble endohedral fullerene derivative, has been synthesized and fully characterized by infrared spectroscopy, nuclear magnetic resonance spectroscopy, UV spectroscopy, electron spin resonance (ESR) spectroscopy, matrix-assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF-MS), elemental analysis, thermogravimetric analysis, and inductively coupled plasma-atomic emission spectroscopy (ICP-AES), and the particle size was determined using the induced grating (IG) method, and scanning probe microscopy. The encapsulated Li⁺ was clearly detected by ⁷Li NMR at very high field in the range −15 to −19 ppm, an intermediate lithium-encapsulated fullerenol was detected by MALDI-TOF-MS, and the molar ratio of lithium-encapsulated fullerenol to empty fullerenol was quantitatively determined to be 12:88 by ICP-AES. The solid-state ESR and particle size measurements using the IG method showed the characteristic anionic behavior with no external counter cations, in what can be called a “cation-encapsulated anion nanoparticle”, revealing the drastic differences between its properties and those of empty C₆₀(OH)₁₆.      

Hydraulic and Sedimentological Characterizations of a Reach on the Anaktuvuk River, Alaska

Rivers located on the North Slope of Alaska’s Brooks Range are typically not well characterized with respect to basic hydraulic and sedimentological data. In order to obtain basic hydrosedimentological information on the Anaktuvuk River, a pristine stream located in the Colville River basin, we conducted an extensive field campaign from late May to early June 2009. The study reach was located at N69°27.785′, W151°09.858′, latitude and longitude, respectively. The Anaktuvuk River flows north from the Brooks Range to the Colville River, drains an area of 7,058?km2, and encompasses 2,063 m of vertical relief. During the field campaign, the field crew measured discharge and water-surface slope, collected water samples, and characterized bed sediment. As a result of fieldwork and laboratory work, we present an initial rating curve for the Anaktuvuk River, as well as the calculated roughness coefficient and suspended sediment concentrations. In addition, we compare the observed bankfull discharges with the bankfull discharge predicted by a recently published model.     

Ecomasterplanning

Best known as the pioneer of the green skyscraper, Ken Yeang is now applying his innovative, ecological thinking to the urban masterplan. Here he outlines how the introduction of an ecoinfrastructure can bring multiple benefits to a city, encouraging connectivity between green spaces, providing natural habitats for wildlife and alleviating the impact of climate change by offsetting CO2 emissions. Copyright © 2008 John Wiley & Sons, Ltd.     

Pervasive data access in wireless and mobile computing environments

The rapid advance of wireless and portable computing technology has brought a lot of research interests and momentum to the area of mobile computing. One of the research focus is on pervasive data access. With wireless connections, users can access information at any place at any time. However, various constraints such as limited client capability, limited bandwidth, weak connectivity, and client mobility impose many challenging technical issues. In the past years, tremendous research efforts have been put forth to address the issues related to pervasive data access. A number of interesting research results were reported in the literature. This survey paper reviews important works in two important dimensions of pervasive data access: data broadcast and client caching. In addition, data access techniques aiming at various application requirements (such as time, location, semantics and reliability) are covered. Copyright © 2006 John Wiley & Sons, Ltd.     

Microstructures and Thermal Properties of Cold-Sprayed Cu-Cr Composite Coatings

Copper-based composites for thermal conductive components were prepared via the cold spray process, and the deposition efficiency and adhesion morphology of feedstock powders on Cu substrate were evaluated. Cu-based composites were fabricated using Cu-Cr mixed powders with their mixture ratio of 20, 35, 50, and 65 mass% Cr onto oxygen-free copper substrate with N₂ carrier gas. Cu-Cr composite coatings were investigated for their Cr content ratio, microstructures, and thermal conductivity. The Cr content ratio in the coating was approximately 50-60% of feedstock mixture ratio due to the low formability of the hard particles. Transmission electron microscopy characterizations revealed that an oxygen-rich layer exists at the Cr particle/Cu substrate interface, which contributes to the deposition of the Cr particles. After the heat treatment at 1093 K, the coatings showed denser cross-sectional structures than those before the heat treatment, and the thermal conductivity was improved as a result of the recrystallization of Cu matrix.     

Reaction Process of Two-step Catalysation Pre-treatment for Electroless Plating on Non-conducting Substrates

This paper describes the formation process and chemical state of adsorbates produced during the two-step catalysation pre-treatment prior to electroless deposition. Tin species adsorbed during sensitisation are divided into two types, namely one that adsorbs weakly and one that adsorbs strongly. The former exists in equilibrium with Sn²⁺ in the sensitising solution. It easily desorbed from the substrate during the following HCl immersion, and the loss is recovered during an ensuing sensitising step. The latter is not desorbed during the HCl immersion step. A dry process after sensitisation, which should promote oxidation, induces the transition from Sn²⁺ to Sn⁴⁺. In the activating step, two reactions proceed independently of each other; that is, an oxidation-reduction reaction between Sn²⁺ and Pd²⁺ takes place, which produces Pd⁰ and Sn⁴⁺. Simultaneously, some Sn²⁺ is desorbed from the substrate. XPS analysis confirms that tin oxide (or hydroxide) and metallic palladium are the final products in the two-step catalysation pre-treatment.