Non-contact flood discharge measurements using an X-band pulse radar (I) theory

This article describes a non-contact method for measuring surface velocity and discharge in a natural channel. The X-band pulse (9.36 GHz) radar, developed by the Applied Physics Laboratory of the University of Washington, was used to scan instantaneously the lateral distribution of surface velocity across a river section, according to Bragg scattering from short waves produced by turbulent boils on the surface of the river. Based on the assumption that the vertical velocity distribution follows a universal power or logarithmic law, the discharges were estimated.     

MASS TRANSFER IN GAS-SPARGED POROUS ELECTRODES

The electrochemical limiting current method was used to measure mass transfer coefficients with cocurrent upward gas-liquid flow in packed bed electrodes. Liquid-solid and overall gas-solid coefficients were determined from limiting current data in the presence of inert or reactive gas flows with the use of a plug flow model. The presence of inert gas flow increased mass transfer coefficients over those in single-phase flow by a factor of up to 1.7. As a result of boundary layer penetration by gas bubbles, sparging with reactive gas increased mass transfer rates by a factor of up to 3.5.     

The role of aluminum in automotive weight reduction—part III

This series of articles provides, from an international perspective, an analysis of the future of the automotive industry and aluminum’s role in automobile weight reduction. Part I briefly described technological, environmental, and societal issues that are mandating vehicular weight reduction for, among other reasons, purposes of fuel economy. Part II described the status of the weight-reduction technologies that are currently available and projects how they may evolve in the coming years. Part III, the final installment, examines some of the specific strengths and weaknesses of aluminum alloys with regard to their long-term attractiveness to automakers.     

Chemistry and Physics of Alkali Metals on MoS2 Surfaces

The interaction of alkali metal with surfaces has been of great interest to the community of catalysis since alkali metal can play an important role as a promoter. On alkali-doped MoS₂, such a promotion effect of alkali metal has been exemplified in the direct synthesis of linear alcohols from CO and H₂, where the alkali-doping switches the catalyst selectivity from methanation to alcohol synthesis. This paper reviews recent high-resolution X-ray photoelectron spectroscopy experiments that have provided direct observation of electron transfer from alkali metals to a model single crystal MoS₂ and the capture of the supra-valence electrons in the subsequent oxidation reactions.     

Change of characteristics of desulfurization and denitrification by combustion flue gas composition and electrode configuration under pulsed corona discharge

Laboratory-scale and parametric experiments of SO₂ and NO_x removal from the simulated combustion gas by pulsed corona discharge have been performed by changing the combustion gas composition and temperature, the electrode configuration of plasma reactor, and the polarity of high-voltage electrode. The following results are obtained: 1) the higher the concentration of H₂O and O₂, the higher the efficiency of desulfurization and denitrification at the same specific input; 2) the pulsed corona discharge with a voltage pulsewidth as short as 200 ns of negative polarity shows the possibility to attain almost 90 percent deSO_x and deNO_x efficiency at the specific discharge input of 20 J/g, which is almost the same as the specific input in the electron-beam process; 3) the deNO_x characteristics show a little temperature dependence in the range of 70 to 130°C, but the deSO_x efficiency increases rapidly in the temperature region below 100°C suggesting the thermochemical dependence of deSO_x reaction; 4) when desulfurization and denitrification proceed, the white dendritic powder deposits on the plasma reactor whose composition is identified to be 49 mol% (NH₄)₂SO₄ and 47 mol% of 2NH₄NO₃ · (NH₄)₂SO₄, and the ratio of SO₂, NO and NH₃ of the deposit is almost equal to that of supplied gas.     

Landmark-based spatial memory in birds (Parus atricapillus and Columba livia): The use of edges and distances to represent spatial positions.

Birds' use of landmarks to identify spatial locations was examined. Black-capped chickadees (Parus atricapillus) and pigeons (Columba livia) searched for hidden food on a 120-cm–2 tray. In each task the target was near an edge with a nearby landmark. On occasional unrewarded tests the landmark was either left in its usual position, shifted parallel to the edge, shifted perpendicular to the edge, or shifted diagonally. On diagonal landmark shifts the birds shifted their searching more in the parallel direction than in the perpendicular, which violates the predictions of the vector sum model (K. Cheng, 1989). In some cases the birds maintained their searching at a constant perpendicular distance under all landmark shifts. This suggests that perpendicular distance to an edge forms an element in determining where to search on the basis of landmarks. Chickadees and pigeons performed similarly, which suggests similarity in the way they encode locations. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Phenomena-based thermal-hydraulic modeling requirements for systems analysis of a Modular High Temperature Gas-Cooled Reactor

The Modular High Temperature Gas-Cooled Reactor (MHTGR) is a candidate design for new production and commercial power nuclear reactors. The MHTGR has inherent safety features including: (1) passive shutdown and decay heat removal, (2) reduced requirements for operator intervention, thereby reducing sensitivity to operator error, and (3) long time intervals for corrective action. In support of the Department of Energy's (DOE) initial development of the design, the authors have completed an evaluation of the thermal-hydraulic phenomena that will dominate the plant response during representative normal, off-normal and accident conditions. Phenomena having significance to the plant behavior have been identified, and ranked with respect to their relative importance in satisfying operational, investment and/or safety criteria. The resulting information provides the basis for evaluating the applicability of existing computer codes, and defines the requirements for the development of new codes, for thermal-hydraulic systems analysis. The phenomena-based requirements also support the quality assurance related verification and validation of these codes. This paper briefly describes the methodology employed, and gives illustrative examples of the resulting requirements. References are cited for reports that document the full body of requirements and provide additional information for the methodology.     

5V转换成-10V的简单电路

典型开关式电容器充电泵不需要电感器，因此容易设计．且能将正电压加倍及将正电压转换成一个等效负电压。但在某些应用中．只有正电源可用．且电源系统必须产生一个幅度比正电源电压幅度更大的负电压。图1所示电路可将其输入电压反相的同时将所得负电压加倍。     

Boundary Procedures for Summation-by-Parts Operators

Four different methods of imposing boundary conditions for the linear advection-diffusion equation and a linear hyperbolic system are considered. The methods are analyzed using the energy method and the Laplace transform technique. Numerical calculations are done, considering in particular the case when the initial data and boundary data are inconsistent.