Formation, Characterization, and Hot Isostatic Pressing of Cr2O3-Doped ZrO2 (0,3 mol% Y2O3) Prepared by Hydrazine Method

In the ZrO₂-Cr₂O₃ system, metastable t -ZrO₂ solid solutions containing up to 11 mol% Cr₂O₃ crystallize at low temperatures from amorphous materials prepared by the hydrazine method. The lattice parameter c decreases linearly from 0.5149 to 0.5077 nm with increased Cr₂O₃ content, whereas the lattice parameter a is a constant value ( a = 0.5077 nm) regardless of the starting composition. At higher temperatures, transformation (decomposition) of the solid solutions proceeds in the following way: t (ss)→ t (ss) + m + Cr₂O₃→ m + Cr₂O₃. Above 11 mol% Cr₂O₃ addition, c-ZrO₂ phases are formed in the presence of Cr₂O₃. The t -ZrO₂ solid solution powders have been characterized for particle size, shape, and surface area. They consist of very fine particles (15–30 nm) showing thin platelike morphology. Dense ZrO₂(3Y)-Cr₂O₃ composite ceramics (∼99.7% of theoretical) with an average grain size of 0.3 μm have been fabricated by hot isostatic pressing for 2 h at 1400°C and 196 MPa. Their fracture toughness increases with increased Cr₂O₃ content. The highest K _Ic value of 9.5 MPa·;m^1/2 is achieved in the composite ceramics containing 10 mol% Cr₂O₃.     

Synthesis of novel tri- and tetrasubstituted C<Subscript>18</Subscript> furan fatty esters

A methylene-interrupted C₁₈ keto-acetylenic fatty ester (methyl 12-oxo-9-octadecynoate) was obtained from methyl ricinoleate by bromination-dehydrobromination followed by oxidation. Reaction of methyl 12-oxo-9-octadecynoate with bis(benzonitrile) palladium(II) chloride, allyl bromide, or methyl-allyl bromide furnished methyl 8-[5-hexyl-3-allyl-furan-2-yl]-octanoate (1, 56%) or methyl 8-[5-hexyl-3-(2-methyl-allyl)-furan-2-yl]-octanoate (2, 55%). Reaction of methyl 12-oxo-11-chloro-or 11-fluoro-9-octadeyynoate (prepared from methyl santalbate-methyl 11-E-9-octadecynoate, found in sandalwood, Santalum album, seed oil) with bis(benzonitrile) palladium(II) chloride gave methyl 8-(4-fluoro-5-hexyl-furan-2-yl)-octanoate (3, 50%) or methyl 8-(4-fluoro-5-hexyl-furan-2-yl)-octanoate (4, 50%), respectively. And when methyl 12-oxo-11-chloro- or 11-fluoro-9-octadecynoate was treated with a mixture of bis(benzonitrile) palladium(II) chloride, allyl bromide, or methyl-allyl bromide, the reaction yielded tetrasubstituted C₁₈ furan derivatives, viz, methyl 8-(3-allyl-4-chloro-5-hexyl-furan-2-yl)-octanoate (5, 54%), methyl 8-[4-chloro-5-hexyl-3-(2-methyl-allyl)-furan-2-yl)-octanoate (6, 54%), methyl 8-(3-allyl-4-fluoro-5-hexyl-furan-2-yl]-octanoate (7, 10%), and methyl 8-[4-fluoro-5-hexyl-3-(2-methyl-allyl)-furan-2-yl]-octanoate (8, 10%). The presence of a fluorine atom in the furan derivatives 4, 7, and 8 was readily characterized by the appearance of doublets for carbon nuclei, which were coupled to the fluorine atom in the ¹³C NMR spectra. All furan fatty derivatives from this work were characterized by NMR spectroscopic and mass spectrometric analyses. The yields of compounds 7 and 8 were very low (10%) despite attempts to improve the procedure by increasing the amounts of the reactants and catalyst.     

膜技术在城市污水回用中的适用性研究

为了探讨膜技术在城市污水回用中的适用性,总结了城市污水的回用现状和技术措施,研究了膜技术在洗浴废水和高氨氮生活污水回用中的应用.结果表明,膜出水水质均符合市政和生活杂用水水质标准.膜技术用于城市污水回用具有明显的环境效益,可有效缓解水资源不足和水环境污染的矛盾.     

The effect of inorganic additives on the formation,composition, and combustion of cellulosic char

At temperature above 300°C the glycosyl units of cellulose are simultaneously depolymerized to a tar and decomposed to a char by evolution of H₂O, CO, and CO₂. When the glycosyl units are depleted, a stable char is formed containing about 30% aliphatic and 70% aromatic components. The aliphatic component is formed first, but on further heating is converted to polycyclic aromatic structures. The chars formed at lower temperatures are more combustible because the aliphatic component of the char is highly pyrophoric and is oxidized almost at the same temperature at which it is formed (～360°C). The aromatic component, however, is less reactive and is oxidized at ～520°C. Consequently, the chars formed at higher temperatures are less combustible. It has been shown that (NH₄)₂HPO₄, which is a well-known flame retardant and smoldering inhibitor, lowers the pyrolysis temperature and increases the char yield by accelerating the decomposition reactions. This affects the composition of the intermediate chars but the final products have about the same composition irrespective of additives. (NH₄)₂HPO₄ also lowers the rate of oxidation of the aromatic component and the corresponding heat release. NaCl, which is an enhancer of smoldering combustion, has a slight stabilizing effect on pyrolysis of cellulose. It lowers the oxidation temperature of the aromatic component and dramatically increases its rate. The corresponding heat release is also increased due to complete oxidation to CO₂. The rate of oxidation calculated from the dynamic thermal analysis data is more than tripled by NaCl and significantly reduced by (NH₄)₂HPO₄.     

Synthesis and Polymerization of Cationic bis(cyclopentadienyliron)arene Complexes Containing Arylazo Dyes

The synthesis of the title complexes was achieved via the reaction of -p-dichlorobenzene- -cyclopentadienyliron cations with 4,4′-bis(4-hydroxyphenyl)valeric acid to produce the diiron complexes which were then reacted with a number of arylazo dyes to give cationic bis(cyclopentadienyliron)arene complexes containing the arylazo dyes. These iron-containing monomers were subsequently polymerized via nucleophilic aromatic substitution using 1,8-octanedithiol, 4,4′-thiobisbenzenethiol, or bisphenol A to produce the desired coloured cationic organoiron polymers. The weight – average molecular weights were estimated to range from 11,800 to 31,600. UV–vis studies conducted in dimethylformamide (DMF) showed that the metallated polymers exhibited of 412–491 nm. Addition of HCl to the polymer solution caused a bathochromic shift into the range of 515–530 nm. Thermogravimetric analysis (TGA) revealed that the iron moieties were cleaved between 205 and 248 °C while the polyether/thioether backbone degraded between 380 and 613 °C. Differential scanning calorimetry (DSC) showed that the polymers exhibited glass transition temperatures (Tg) ranging from 106 to 184°C.This paper is dedicated to Professor Richard J. Puddephatt in recognition of his outstanding contribution to the field of metal-containing polymers.     

An Application of Silica‐Based Monolithic Membrane Emulsification Technique for Easy and Efficient Preparation of Uniformly Sized Polymer Particles

Summary: Uniformly sized polymer particles were prepared by an emulsification and polymerization technique utilizing a silica monolithic membrane, namely the “silica monolithic membrane emulsification technique”. In this paper, we utilized silica monolithic membrane as a device for the preparation of uniformly sized polymer particles. A mixture of monomers, diluents and oil‐soluble initiator was emulsified into a continuous medium through the silica monolithic membrane and polymerized. The particles obtained had a higher size uniformity than that of particles prepared by previously reported membrane emulsification techniques, such as the Shirasu Porous Glass (SPG) emulsification technique. Through the silica monolithic membrane emulsification technique, we could prepare particles having availability as a possible packing material for solid‐phase extraction (SPE) and high performance liquid chromatography (HPLC).

SEM photograph of silica particles prepared through capillary plate membrane.     

分段对称反向高斯-约当消元法及其应用

求解变系数方程的高斯消元法与高斯-约当消元法计算原理类似、问题相近,但前者计算速度高于后者.提出分段对称反向高斯-约当消元法,其中包括根据系数矩阵结构特点构成特殊增广阵,以展示和应用元素的变化规律,并分段对上下三角元素消元以大大提高计算效率.对矩阵下三角元素正向消元及对称计算可简化所有下三角元素计算,而对上三角元素反向消元可再省略所有上三角元素计算,而取倒后的对角元素作为规格化因子可大大减少除法计算.根据单位矩阵结构特点,对其规格化或对系数矩阵上下三角元素消元时均仅计算部分对角元素和下三角元素可进一步提高计算效率.所有元素均用四角规则计算而无需计算公式以简化计算和编程.新方法大大减少了高斯-约当消元法中元素的计算,且原理简单、易于编程,可快速求解各种变系数方程,还可利用元素对称性求解常系数的节点阻抗矩阵.与高斯消元法和高斯-约当消元法相比,新方法计算速度大大提高.     

High-voltage surge protection by a varistor-filled air gap

The electric discharge across a varistor granule filled air gap under a fast-rising voltage pulse was investigated for surge protection applications. The effects of temperature and pressure on the arc and the electrical conduction were analyzed by the characteristic changes in voltage waveforms triggered by a fast-rising high voltage pulse. In addition to the gap size, experimental results show that competing mechanisms among arc conduction, conduction through the varistor granule network, thermionic emission from Joule heating at granule-to-granule contact points, and the magnitude of the switching voltage dictate the maximum surge protection voltage for the filled air gap. Experimental evidence indicated that accumulated degradation was created at small contact points between varistor granules by repetitive assaults from longer duration, high voltage pulses. The uniqueness of using varistor over other dielectric granules in an air gap for surge protection is identified and discussed.     

Spatial distribution of silica fillers in phase-separated rubber blends investigated by three-dimensional elemental mapping

The distribution of nano-sized silica in binary rubber blends is characterized by scanning transmission electron microscopy (STEM) tomography combined with energy dispersive X-ray spectrometry (EDX). 3D distribution of silica is visualized by STEM-EDX tomography with the tilt-series of silicon elemental maps, while the phase-separated morphologies of polyisoprene rubber (IR) and styrene-butadiene rubber (SBR) are visualized by STEM-tomography in high-angle-annular-dark field (HAADF) mode. The combination of STEM-EDX and STEM-HAADF tomography enables us to determine the distribution of silica between the two rubber phases quantitatively even with high contents of silica up to 70 phr (weight parts per hundred rubber). It is found that silica is preferentially distributed in the SBR phase, but it is also distributed in the IR phase when the IR fraction in the total rubber components is higher than 40 wt%. The preferential distribution of silica in the SBR phase improves the dispersion of the IR domains. This is the first use of this technique for a multicomponent polymer system, showing the advantage to characterize the complicated multicomponent polymer composite morphologies.     

CAN总线伺服控制卡的研制应用

本文结合清华大学THBIP-I型仿人机器人样机研制，开发设计了基于CAN总线的仿人机器人关节伺服控制卡。文中详细描述了该控制卡的硬件结构原理和系统软件协议，以及伺服卡在样机上的技术实验，并提出了进一步完善发展的思路。