A new blood compatible and permselective hollow fiber membrane for hemodialysis

The authors have prepared a blood compatible and highly permselective hemodialysis membrane composed of polyether segmented nylon. This block copolymer was synthesized by polycondensation of bis-3-aminopropyl-poly(tetramethylene oxide) (PTMO) and poly(imino-1,3-bismethyl-cyclohexyl-iminoisophtharoyl) (NyBl) prepolymer obtained by polycondensation of 1,3-bis(aminomethyl)cyclohexane (B) and isophthalic acid (I). The molecular weight (MW) calculated from the number of end-groups was 16,000-21,000. In vitro blood compatibility was evaluated in terms of platelet adhesion onto the surface. PTMO-NyBl surfaces showed excellent platelet adhesion preventing properties. The PTMO-NyBl hollow fiber membrane was obtained by a dry-wet spinning process. The membranes had higher permeability coefficients for macromolecules ranging from MW 10,000 to 20,000 than polysulfone hollow fiber membrane (PS membrane), and had acceptably low albumin permeability for use as a dialysis membrane. The ex vivo blood compatibilities of PTMO-NyBl membrane and PS membrane were investigated by extracorporeal circulation in a pig model. The PTMO-NyBl membrane gave excellent results when assessing hemodialysis leukopenia, oxidative burst, and free platelet count decrease.     

Accuracy of measurements of the quantized Hall resistivity by adirect current comparator type potentiometer: calibration using aJosephson potentiometer

The accuracy of measurements of the quantized Hall resistivity (QHR) by a direct-current-comparator (DCC)-type potentiometer is estimated based on a linearity calibration of the potentiometer using a Josephson potentiometer. The power coefficient contribution to the nonlinearity of the DCC potentiometer was found to be 0.15±0.02 p.p.m./(100 mV)² at 18.5±0.5°C in 1985 and 0.21±0.03 p.p.m./(100 mV)² at 20.5±0.5°C in 1988. The possibility of accurate measurements of the ratio QHR/R _STD with uncertainties less than 0.05 p.p.m. by the DCC potentiometer is discussed     

Effect of Support Materials on the Selective Methanation of CO over Ru Catalysts

Selective methanation of CO in the reformate gas (CO/CO₂/H₂/H₂O = 0.175/17.9/70.9/11.1) proceeded over Ru catalysts supported on metal oxides and zeolites. CO was selectively methanated at wide temperature ranges (200–275 °C) over Ru/γ-Al₂O₃, Ru/TiO₂ Ru/H-Y and Ru/H-beta catalysts. Higher Ru contents in Ru/γ-Al₂O₃ improved the selective CO methanation rate.     

Methacrylate-based ionic liquid: radical polymerization/copolymerization with methyl methacrylate and evaluation of molecular weight of the obtained homopolymers

Azobisisobutyronitlite (AIBN)-induced free radical polymerization of a methacrylate-based ionic liquid monomer, 1-(2-methacryloxyethyl)-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (Met-IL) was carried out in a common organic solvent, N,N-dimethylformamide (DMF), and an ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (EMImTFSI). The molecular weight of the obtained poly(Met-IL) was evaluated by transforming it to non-ionic poly(methyl methacrylate) with hydrolysis of the imidazolium-salt-substituted pendant ester groups and methyl esterification. Radical copolymerization with methyl methacrylate (MMA) was also carried out in both DMF and EMImTFSI. Analysis of copolymer composition revealed that the reactivity of Met-IL was lower than that of MMA in both DMF and EMImTFSI solutions.     

Preparation of avidin-containing polyelectrolyte microcapsules and their uptake and release properties

Avidin-containing polyelectrolyte microcapsules were prepared by a layer-by-layer deposition technique and uptake and release of biotin-labelled fluorescein (b-FITC) was studied. The polyelectrolyte microcapsules were prepared by coating the surface of calcium carbonate (CaCO₃) microparticles containing avidin-poly(styrene sulfonate) (PSS) conjugate, followed by dissolution of CaCO₃ core in an ethylenediaminetetraacetic acid solution. Release of avidin from the microcapsules was markedly suppressed due to formation of a high molecular weight of avidin-PSS conjugate in the microcapsules. The uptake of b-FITC into the microcapsules was highly enhanced through a strong binding of b-FITC to avidin, as compared to the uptake into avidin-free microcapsules. Release of b-FITC from the microcapsules was accelerated upon addition of biotin, 2-iminobiotin, or lipoic acid in the solution due to the competitive binding of the additives to the binding site of avidin.     

Evaluation of Desulphurization Flux in CaO‐Al2O3‐BaO‐CeO2‐MgO System

The flux of the CaO‐Al₂0₃‐BaO‐CeO₂‐MgO system as a desulphurization flux containing no fluorine for the secondary metallurgy process was evaluated in this study. The flux composition was designed using the eutectic compositions of the binary systems. The melting and desulphurization abilities of the fluxes were evaluated by measuring their liquidus temperatures and the distribution ratios of sulphur between the fluxes and the carbon‐saturated iron or stainless steel. The lowest liquidus temperature of 1325°C was obtained by adding 5.7 mass% MgO to the 80mass%A‐20mass%B flux. (A: 12CaO‐7Al₂O₃, B: BaCeO₃+12mass%Al₂O₃). The distribution ratios of sulphur and sulphide capacities of the fluxes in this study were higher than those of the commercial product of calcium aluminate flux. This means that the CaO‐Al₂O₃‐BaO‐CeO₂‐MgO fluxes developed in this study have higher desulphurization and melting abilities compared with the commercial product of calcium aluminate flux.     

Practical Continuous‐Flow Controlled/Living Anionic Polymerization

A continuous‐flow reaction system was developed, allowing flow conditions of the entire system to be maintained at a predetermined constant level, which is one of the most significant factors for successful industrial application. Controlled/living anionic polymerization was selected as a model reaction since the characteristics of its polymer products, molecular weights, and molecular weight distributions are highly susceptible to changes in the relative flow rates of a monomer and initiator solutions. In flow microreactors, controlled/living anionic polymerization of styrene in tetrahydrofuran (THF)/hexane initiated by THF‐diluted n‐butyllithium (n‐BuLi) was examined. Poly(styrenes) of larger molecule sizes such as Mn > 15 000 were successfully synthesized. After continuous operation for four hours, ca. 0.5 kg of the polymer was readily produced with narrow molecular weight distribution, demonstrating the applicability of this continuous‐flow system for controlled/living anionic polymerization on considerably large scale with a view to its industrial usage in the future.     

Synthesis of novel organocobalt poly(arylene-vinylene)s containing (cyclobutadiene)cobalt moieties in the main chain

Summary Organocobalt poly(arylene-vinylene)s composed of 1,2- or 1,3- linkage at their cyclobutadiene moieties (3 and 4, respectively) were prepared by the Heck reaction of p-divinylbenzene with (cyclobutadiene)cobalt-containing monomers having two aryl bromide moieties (1 and 2, respectively). The number average molecular weights (M _n) of the obtained organocobalt poly(arylene-vinylene)s (3 and 4) were 4,100 and 4,000, respectively (GPC, on the basis of polystyrene). UV-vis spectra of 3 and 4 exhibited main π-π^* absorption peaks at 362 and 397 nm, respectively, which were ca. 60 nm bathochromically shifted from those of the corresponding monomeric units. Both polymers were found to show thermotropic liquid crystallinity in the range of room temperature to ca. 80 °C by employing differential scanning calorimetry (DSC) and the optical measurement using crossed polarizers. Received: 2 July 1999/Accepted: 29 July 1999     

Preparation method for supported metal catalysts using w/o microemulsion: Study on immobilization conditions of metal particles by hydrolysis of alkoxide

It was previously found that the silica-supported rhodium catalyst prepared using water-in-oil microemulsion had rhodium particles partly, or wholly, embedded in silica. In this work, consequently, we investigated the effect of hydrolysis conditions of tetraethylorthosilicate, employed as the source of silica, on the atomic ratio of surface rhodium in contact with the gas phase, to total surface rhodium of nanoparticles. This ratio is denoted as R in this paper. R became higher when the catalyst was prepared under the following hydrolysis conditions: a shorter hydrolysis time and a smaller amount of tetraethylorthosilicate. On the other hand, R showed the minimum value when the water content in the preparation solution was 33 vol%. From these results, it is demonstrated that it was important to form silica as early as possible in hydrolysis of TEOS in order to increase R values. In addition, the effect of R on the catalytic behavior in CO hydrogenation was investigated. At R values below 30%, the turnover frequencies increased with a decrease in R.     

Enhancement of low density lipoprotein binding to both low density lipoprotein receptor-positive and- negative cells by tetracycline antibiotics

Some tetracycline (TC) antibiotics, including TC and anhydrotetracycline, have been found to enhance specific binding of low density lipoprotein (LDL) to both LDL receptor-positive and-negative cells at relatively higher concentrations. When incubated at 37°C, the ability of LDL receptor-negative human fibroblasts to bind ¹²⁵I-LDL was increased from<2 to 45 ng/mg by 170 μM TC. In normal human fibroblasts and Hep G2 cells, ¹²⁵I-LDL binding was elevated 1.4- to 2-fold by 113 μM TC. The ¹²⁵I-LDL binding in the presence of TC was diminished by both heparin and EDTA. The enhancement by TC was not observed when ¹²⁵I-LDL binding was assayed at 4°C. TC enhanced LDL binding to paraformaldehyde-fixed Hep G2 cells, excluding LDL receptor induction in the mechanism. These results demonstrated that TC enhanced cellular LDL binding through a process not involving functional LDL receptors.