Dielectric properties of sol-gel derived Ta2O5 thin films

The dielectric constant and the dielectric loss of tantalum pentoxide (Ta₂O₅) thin films, produced by sol-gel spin-coated process on Corning glass substrates, have been investigated in the frequency range of 20-10⁵ Hz and the temperature range of 183-403 K, using ohmic Al electrodes. The frequency and temperature dependence of relaxation time has also been determined. The capacitance and loss factor were found to decrease with increasing frequency and increase with increasing temperature. The activation energy values were evaluated and a good agreement between the activation energy values obtained from capacitance and dielectric loss factor measurements were observed.     

Investigation of Al-O-Al sites in an Na-aluminosilicate glass

This paper reports the presence of Al- O- Al linkages in an aluminosilicate glass where Si/Al = 1 by using 2D¹⁷O triple quantum MAS NMR technique (3Q MASNMR). The experiments were performed at external magnetic fields of 8.4 and 14.4T. Despite¹⁷OMAS NMR spectra of the sample in both fields do not give much information about the different kinds of linkages in the sample, 3Q MAS NMR spectrum shows clear evidence that there are some amounts of Al-O-Al linkages in the sample giving two completely resolved peaks. These two peaks were attributed to the Si-O-Al and Al-O-Al linkages on the basis of their chemical shifts and, quadrupolar coupling constants which are quite sensitive to the local structure.     

Coal consumption and industrial production nexus in USA: Cointegration with two unknown structural breaks and causality approaches

The paper investigates the causality relationships among industrial production index, coal consumption and employment in industrial sector for the period of 1973:1–2011:10 in USA. After noticing that there are breaks in the regression model, the Hatemi-J test for cointegration is employed to the cases that take into account two possible regime shifts. It is concluded that there is a long run relationship between industrial production and industrial coal consumption with the breaks at 1983:4 and 1998:4. We found a negative relationship between coal consumption and industrial production for the period of 1973:1–1983:4 and positive relationship for 1983:5–1998:4 period. For the last period that covers 1983:5–2011:10, the cointegration relationship turned to negative. In addition, the results show that causal relationship between coal consumption and industrial production changes over time.     

Investigation of Lu effect on YBa2Cu3O7−δ superconducting compounds

This study reports the effect of Lu addition on the microstructural and superconducting properties of YBa₂Lu_xCu₃O_7?δ (Y123) superconducting samples with x = 0, 0.1, 0.3, 0.5 and 0.7 by means of X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), electron dispersive X-ray (EDX), electrical resistivity and transport critical current density (J_c) measurements. The samples prepared by the liquid ammonium nitrate and derivatives are exposed to various annealing time (20, 40 and 60 h) and temperature (950, 960 and 970 °C), and the best ambient for the sample fabrication is determined to be 970 °C for 20 h. Zero resistivity transition temperatures (T_c), critical current densities (J_c), variation of transition temperatures, hole-carrier concentration, grain size, lattice parameter, surface morphology, element distribution, crystallinity and resistivity (at room temperature) values of the bulk superconducting samples prepared at 970 °C for 20 h are compared with each other. T_c and J_c values of the samples are inferred from the dc resistivity and the critical current measurements, respectively. The results show that the T_c value of the pure sample is about 90.6 K while the sample doped with 0.1 wt% Lu has the maximum T_c value (92.5 K). However, beyond x = 0.1, the T_c value is observed to decrease toward to 83.5 K with increment in the Lu addition. Similarly, the J_c values measured are found to reduce from 142 to 76 A/cm² with the addition. Moreover, XRD measurements show that both pure and Lu-doped samples exhibit the polycrystalline superconducting phase with the changing intensity of diffraction lines and contain Y123 and Y211 phase, confirming the incorporation of Lu atoms into the crystalline structure of the samples studied. At the same time, comparing of the XRD patterns of samples, the intensity ratio of the characteristic (110) and (013) peaks on the sample doped with 0.1 wt% Lu is more than that on the other samples prepared. Additionally, SEM images display that the sample doped with 0.1 wt% Lu obtains the best crystallinity, grain connectivity and largest grain size whereas the worst surface morphology is observed for the maximum doped sample (x = 0.7). Further, EDX results demonstrate that the Lu atoms doped are successfully introduced into the microstructure of the Y123 samples studied and the maximum Cu element level is observed for the sample doped with 0.1 wt%, explaining that why this sample obtains the best superconducting properties compared to others. According to all the results obtained, it is concluded that the 0.1 wt% Lu addition into the Y123 system improves the microstructural and superconducting properties of the samples studied.     

A new ship energy management algorithm to the smart electricity grid system

In this paper, a new energy management algorithm has been suggested for the ships connected with alternative energies considering the smart electricity grid features. The algorithm focuses on the use of optimum energy source on the shipboard based on the priorities of authorities such as the most economic, environmental, or both criteria at the ports. The algorithm is performed in MATLAB, and several case studies are simulated to validate the results. The 5 maritime nations, which are at different regions: United States, Belgium, Turkey, China, and Australia, are taken into account in the case studies. The actual data of a bulk carrier ship have been used to achieve tangible results in the simulations. The results of the case studies are compared to determine the changes of energy cost and released emission to meet demand of electricity on the ships. Capital cost of the proposed concept is also given to make an economic evaluation. The results show that the ship energy management algorithm provides the significant economic and environmental advantages. This paper aims to contribute to the importance of the ships in the smart electricity grid concept for the maritime and electricity sector representatives.     

Do ozone and boric acid affect microleakage in class V composite restorations?

The aim of this in vitro study was to evaluate the effects of chlorhexidine gluconate (2%), sodium hypochloride (2.5%), ozone gas, and boric acid at different concentrations (1%, 3%, 5%, and 7%) on microleakage from composite restorations.

In a total of 80 extracted human canine teeth, a class V cavity was opened on the buccal surface and the samples were separated into eight groups. In the control group, no procedure was applied for cavity disinfection, then composite restoration (Z250, 3M) was made using single-stage, self-etch adhesive (Single Bond 3M). In the other groups, seven different disinfectants were used, then the cavity was restored. The teeth were split into two in the buccolingual direction, parallel to the long axes. Stain penetration was examined under stereomicroscope and scored. Examination with SEM was made on one sample from each group, selected at random. Statistical evaluations were made using Dunnett C Post Hoc Comparison and Kruskal–Wallis H tests.

In the occlusal region evaluation, the groups with the lowest level of leakage were the 3% and 5% boric acid groups, and the highest levels of microleakage were determined in the chlorhexidine group and the 1% boric acid group. In the gingival region, the lowest level of microleakage was in the 5% boric acid group and the highest levels were determined in the 1% and 7% boric acid groups.

Boric acid disinfectants used at suitable concentrations were not seen to create a risk in respect of microleakage.     

A BIM-GIS integrated pre-retrofit model for building data mapping

In response to rising energy costs and the impetus to reduce environmental impacts, upgrading the large building stock that is responsible for 40% of the total energy consumption to maximum energy efficiency is becoming an important task. Despite the many benefits associated with retrofit projects, they are still only slowly being implemented because of the many challenges that exist. One of these challenges is optimizing the decision between renovation scenarios based on economic and environmental goals, which can be made possible with an accurate pre-retrofit model. The intention of this paper is to introduce a pre-retrofit model that efficiently obtains and integrates multiple forms of building data as a critical step to develop a comprehensive understanding of a building to be renovated. Opportunities for utilizing building information modeling (BIM) and geographical information systems (GIS) for retrofitting projects were explored through the study of a historical campus building. With the use of as-is geometric data and as-is data, building data maps were obtained. The next step of this study is to use the model to conduct scenarios comparison and optimize renovation decision based on economic and environmental goals.     

Effects of Mn and Gd Co-substituted into ZnO on Structural and Magnetic Properties

We have worked on the structural and magnetic properties of Zn_0.99?xMn_0.01Gd _x O _δ (for x = 0.02, 0.03, and 0.04) compounds prepared by using a sol–gel method. The x-ray diffraction, scanning electron microscopy, and energy dispersive x-ray spectroscopy were used to understand the structural properties of the samples. We observed that co-substitution of Mn (1 %) and Gd (2–4 %) into the ZnO does not change the hexagonal structure. Scanning electron microscope (SEM) images show us that the grain size decreases with the increasing amount of the Gd into the ZnO matrix. The magnetic properties of the samples have been investigated by using magnetic hysteresis and DC susceptibility measurements. The ZMG1 sample shows a weak ferromagnetic behavior at room temperature, whereas the ZMG2 and ZMG3 samples exhibit a paramagnetic nature. Furthermore, it is also found that the magnetizations of the samples decrease with increasing Gd content in the ZnMnO system due to the enhancing interaction between Gd ³⁺ ions. We summarize that the co-substitution of Mn and Gd into the ZnO generates a room-temperature ferromagnetism, but it still needs more work to obtain strong and high coercivity magnetic loops for applications.     

Comparison on efficiency factors of F and C types of fly ashes

Fly ashes are obtained from thermal power plants and they are pozzolanic materials, which can act as partial replacement material for both portland cement and fine aggregate. With their economical advantages and potential for improving fresh and hardened concrete performance, they have some benefits for using in concrete industry. In this study, the objective was to find the efficiency factors of Turkish C and F-type fly ashes and to compare their properties. Three different cement dosages were used (260, 320, 400 kg/m³), two different ratios (10% and 17%) of cement reduced from the control concretes and three different ratios (depending on cement reduction ratio) of fly ash were added into the mixtures. At the ages of 28 and 90 days, compressive strength, modulus of elasticity and ultrasound velocity tests were carried out. From the compressive strength results, the k efficiency factors of C and F-type fly ashes were obtained. As a result, it is seen that efficiency factors of the concrete produced by the replacement of F and C type fly ashes with cement increase with the increase in cement dosage and concrete age.