三维地震勘探技术在多组系复杂构造区的应用

勘探区位于川东高陡复杂地区,工区地表、地震地质条件复杂,地质构造受多期次多组系应力作用,虽经过了多次二维地震勘探,但仍然难以搞清各构造之间的相互接触关系及区内断层的断点位置和组合关系.在该地区进行的三维地震勘探施工中,通过优化野外采集施工方式、室内地震资料处理技术措施、三维可视化技术精细地震资料对比解释技术,提高了地震...     

Experimental investigation on transverse low-speed impact behavior of adhesively bonded similar and dissimilar clamped plates

This experimental study investigates the low-speed impact behavior of adhesively bonded similar (Al–Al, St–St) and dissimilar (Al–St, St–Al) plates. The after-impact geometries of the front and back faces of the bonded plates, which were visualized by measuring the displacements, were in good agreement with the simulated surface geometries obtained by using explicit finite element method. The plate stiffness was affective on the deflections of the bonded plates; thus, the bonded Al–Al plates exhibited maximum deflections, contact durations, and minimal contact force levels, whereas the bonded St–St plates had minimum deflections, contact durations, and maximum contact force levels. As the impact energy is increased, the impact forces, durations, and deflections increased naturally; however, the impact force-time histories were not affected evidently. The bonded Al–Al plates can dissipate the impact energy more effectively than the bonded St–St plates. The experimental and simulated contact force-time histories were generally in good agreement. Based on the cross-section photographs of the damaged impact regions the bonded Al–Al plates with low stiffness can deform plastically and dissipate most of the impact energy, and the adhesive layer remains compatible with the deformation of the plates. The interfacial fractures appear along the back plate–adhesive interface for the low impact energy but along both front and back plate–adhesive interfaces and cracks propagated to the back interface to lower interface through the adhesive thickness near the boundaries of the impactor trace. The bonded St–St plates behave more rigid, transmit the impact energy directly to the adhesive layer and the high impact force distributions result severe fractures not only interfacially but also through the adhesive thickness. The color transformations, which are indications of fracture formation and propagation speed in some way, were observed around the adhesive fractures. Although the bonded St–Al and Al–St plates had a fracture mechanism similar to those of the bonded Al–Al plates but the color transformation near the fractures and the crack opening displacement levels were more evident. The existence of a stiffer plate affects considerably the damage formation in the adhesive layer and in the plates, whereas the less stiff plates can dissipate the impact energy by deforming plastically and the adhesive layer experiences less local damages.     

Lubrication of poly(vinyl alcohol) chain orientation by carbon nano‐chips in composite tapes

The extraordinary structural properties of graphene and carbon nanotube materials motivate the development of practical methods for their use in fabricating continuous, strong, and tough composite fibers. Poly(vinyl alcohol) (PVA)/carbon nano‐chip fiber (CNCF) composite tapes with 0.5 wt % loading show that Young's modulus, tensile strength, and toughness are increased by 585%, 653%, and 20%, respectively as compared to the control (PVA) tapes. Nano‐chips exfoliated from the CNCF during processing, lubricate polymer chain alignment, and orientation during drawing, where composite tapes could be drawn to higher draw ratios compared with the control tapes. As a result, the Herman's orientation factor (f) increased from 0.5 (control tape) to 0.8 (composite tape). Theoretical analysis shows ～ 16 vol % of the composite tapes consists of fully oriented PVA chains, which contributes to its exceptional mechanical performance. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Drift estimation using pairwise slope with minimum variance in wireless sensor networks

Time synchronization is mandatory for applications and services in wireless sensor networks which demand common notion of time. If synchronization to stable time sources such as Coordinated Universal Time (UTC) is required, employing the method of flooding in order to provide time synchronization becomes crucial. In flooding based time synchronization protocols, current time information of a reference node is periodically flooded into the network. Sensor nodes collect the time information of the reference node and perform least-squares regression in order to estimate the reference time. However, least-squares regression exhibits a poor performance since sensor nodes far away from the reference node collect the time information with large deviations. Due to this fact, the slopes of their least-squares line exhibit large errors and instabilities. As a consequence, the reference time estimates of these nodes also exhibit large errors.This paper proposes a new slope estimation strategy for linear regression to be used by flooding based time synchronization protocols. The proposed method, namely Pairwise Slope With Minimum Variance (PSMV), calculates the slope of the estimated regression line by considering the pairwise slope between the earliest and the most recently collected data points. The PSMV slope is less affected by the large errors on the received data, i.e. it is more stable, and it is more computationally efficient when compared to the slope of the least-squares line. We incorporated PSMV into two flooding based time synchronization protocols, namely Flooding Time Synchronization Protocol (FTSP) and PulseSync. Experimental results collected from a testbed setup including 20 sensor nodes show that PSMV strategy improves the performance of FTSP by a factor of 4 and preserves the performance of PulseSync in terms of synchronization error with 40% less CPU overhead for linear regression. Our simulations show that these results also hold for networks with larger diameters and densities.     

超薄切割片的加工变形研究现状

超薄切割片在工作中极易出现径向加工变形。从应力和变形的理论分析、有限元模拟分析和试验研究等方面,对超薄切割片的加工变形研究现状进行总结。此外,分析研究中存在的问题,介绍具有相似结构的砂轮和圆锯片的相关研究成果。结果发现:切割片转速对超薄切割片变形影响的研究比较系统,但磨削深度和进给速度对其影响的相关研究还有一定的差距。同时,切入工件时测量方法的缺失也限制了研究的深入。因此,需要不断完善理论公式并充分应用有限元模拟,持续推进相关研究,优化和补偿超薄切割片的变形,提高工件的加工精度。      

rGO/CuO/PEDOT nanocomposite formation,its characterisation and electrochemical performances for supercapacitors

ABSTRACT

Supercapacitor properties of rGO, CuO, PEDOT and rGO/CuO at [rGO]_o/[CuO]_o?=?1:1; 1:1.5; 1:2 and rGO/CuO/PEDOT nanocomposite at [rGO]_o/[CuO]_o/[EDOT]_o?=?1:1:1; 1:1:3; 1:1:5 were investigated using chemical reduction of GO and in-situ polymerisation process. SEM-EDX, HRTEM, BET surface area analysis confirm the nanocomposite formations. Nanocomposite materials are also analysed through FTIR-ATR, Raman, TGA-DTA, GCD, CV and EIS. The highest specific capacitance of C _sp?=?156.7 F/g at 2?mV/s is determined as rGO/CuO/PEDOT at [rGO]_o/[CuO]_o/[EDOT]_o?=?1:1:5. In addition, two-electrode supercapacitor device for rGO/CuO/PEDOT at [rGO]_o/[CuO]_o/[EDOT]_o?=?1:1:5 are found to provide a maximum specific energy (E?=?14.15 Wh/kg at 20?mA) and specific power (P?=?24730 W/kg at 50?mA), electrical serial resistance (ESR?=?13.33 Ω) with good capacity retention after 3000 cycles. An equivalent circuit model of LR1(CR2)(QR3) is proposed to interpret the EIS data. The supercapacitor performance of the rGO/CuO/PEDOT nanocomposite electrode indicates the synergistic effect of hybrid supercapacitors.     

Modelling of the hysteresis effect of target voltage in reactive magnetron sputtering process by using neural networks

Reactive sputtering process is very non-linear and usually exhibits hysteresis behaviour with respect to the reactive gas flow. Most of the problems encountered in the preparation of non-stoichiometric compound films by reactive sputtering are due to the hysteresis effect. Therefore, a considerable amount of effort has been devoted to find means for its elimination or ensuring a stable sputtering in the transition mode. This paper presents a new approach based on Artificial Neural Networks (ANNs) for modelling of the hysteresis effect of target voltage at different target power levels and reactive gas flow rates in reactive sputtering. Based on this model, it is possible to predict the target voltage in reactive magnetron sputtering processes, when the target power level, reactive gas flow rate and its direction are used as inputs to the artificial neural network (ANN). The proposed ANN is trained in different structures with the use of learning algorithms to obtain better performance and faster error convergence. Broyden–Fletcher–Goldfarb Shanno (BFGS) algorithm gives the best result among other learning algorithms used in the analysis. The training and test data required to develop the ANN model are obtained from the experimental studies. Both the training and the test results are in very good agreement with the experimental results obtained in this work.     

Assessment of the Axial Load Response of an H Pile Driven in Multilayered Soil

Most of the current design methods for driven piles were developed for closed-ended pipe piles driven in either pure clay or clean sand. These methods are sometimes used for H piles as well, even though the axial load response of H piles is different from that of pipe piles. Furthermore, in reality, soil profiles often consist of multiple layers of soils that may contain sand, clay, silt or a mixture of these three particle sizes. Therefore, accurate prediction of the ultimate bearing capacity of H piles driven in a mixed soil is very challenging. In addition, although results of well documented load tests on pipe piles are available, the literature contains limited information on the design of H piles. Most of the current design methods for driven piles do not provide specific recommendations for H piles. In order to evaluate the static load response of an H pile, fully instrumented axial load tests were performed on an H pile (HP?310×110) driven into a multilayered soil profile consisting of soils composed of various amounts of clay, silt and sand. The base of the H pile was embedded in a very dense nonplastic silt layer overlying a clay layer. This paper presents the results of the laboratory tests performed to characterize the soil profile and of the pile load tests. It also compares the measured pile resistances with those predicted with soil property- and in situ test-based methods.     

有机油气形成的影响因素——模拟实验的研究进展

地球上的油气资源主要是由地球深部的有机质热裂解形成,近年来的模拟实验对其机理获得很多认识,表明了有机质类型、温度、压力、催化作用以及水介质都对油气产物的特征存在影响。压力增加可能会阻碍或延迟有机质的热演化和裂解;水是热裂解反应的氢源和氧源;催化作用不仅可以改变产物的组成特征,而且对反应机理存在影响。动力学因素也是影响有机质裂解反应的一个很重要的方面,为不同烃源岩的判识提供了一种新思路,并建议进一步开展对更高压力下有机质的热演化机制、特征的实验模拟研究。     

Achieving compatibility in blends of low‐density polyethylene/polyamide‐6 with addition of ethylene vinyl acetate

Polymer alloys and blends, whose major advantage is the potential of achieving a range of physical and mechanical properties, have continued to be a subject of interest over recent years. Addition of a block or graft copolymer, with chemically similar segments to those involved in the polymer blend considered, led to a variety of desirable properties. The copolymer added to the blend functioned to promote a homogeneous dispersion of the constituent phases and to enhance their mutual adhesion. Such agents that enable better dispersion in polymer blends are known as compatibilizers. In this study an attempt has been made to improve the compatibility in a polymer blend composed of two normally incompatible constituents, LDPE and PA₆, by addition of a compatibilizer. The compatibilizer agent, ethylene vinyl acetate (EVA), was added to the polymer blend in ratios of 1, 5, and 10% by using a twin‐screw extruder. The effect of EVA on the crystallization of the polymer constituents was observed through DSC examinations. Furthermore, the control sample and all three blends of LDPE/PA₆/EVA were subjected to examinations to obtain their yield and tensile strengths, elasticity modulus, percentage elongation, izod impact strength, hardness, and melt flow index. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1748–1754, 2001