Characteristics of particle mixtures in a liquid‐fluidized bed

Behavior of particle mixtures was investigated in a liquid‐fluidized bed experimentally. In the experiment, two kinds of particles of different diameters, and of the same or different materials, were charged in a fluidization column and fluidized by water. Based on the observation of fluidization, a flow pattern map was proposed using the Archimedes number ratio and the terminal velocity ratio, which classifies the two patterns, that is, separation and homogeneous mix. Measured mean void fractions of particle mixtures agreed well with the values calculated from those for each particle independently. © 2001 Scripta Technica, Heat Trans Asian Res, 30(3): 175–184, 2001     

Reversible computing and cellular automata—A survey

Reversible computing is a paradigm where computing models are defined so that they reflect physical reversibility, one of the fundamental microscopic physical property of Nature. In this survey/tutorial paper, we discuss how computation can be carried out in a reversible system, how a universal reversible computer can be constructed by reversible logic elements, and how such logic elements are related to reversible physical phenomena. We shall see that, in reversible systems, computation can often be carried out in a very different manner from conventional (i.e., irreversible) computing systems, and even very simple reversible systems or logic elements have computation- or logical-universality. We discuss these problems based on reversible logic elements/circuits, reversible Turing machines, reversible cellular automata, and some other related models of reversible computing.     

Glucose action 'beyond ionic events' in the pancreatic beta cell

For normal glucose homeostasis, insulin release by the pancreatic beta cell is vital. Until recently, it was thought that glucose-induced ionic events, such as closure of the ATP-sensitive K+ (KATP) channels, membrane depolarization, activation of the L-type voltage-dependent Ca2+ channels, Ca2+ influx and elevation of cytosolic free Ca2+, constitute the main signalling pathway in beta-cell stimulus-secretion coupling. However, since the discovery of 'non-ionic' glucose actions in the beta cell by the Aizawa and Henquin laboratories in 1991, data have accumulated that strongly indicate the physiological relevance of this signalling pathway. In this review, Toru Aizawa and colleagues discuss how the KATP channel-Ca2+ hypothesis was formulated, what was overlooked in the hypothesis, and then provide a comprehensive view of stimulus-secretion coupling in the beta cell, with an emphasis on non-ionic glucose actions.     

Strength Analysis of Yttria-Stabilized Tetragonal Zirconia Polycrystals

Tensile strength of Y₂O₃-stabilized ZrO₂ polycrystals (Y-TZP) was measured by a newly developed tensile testing method with a rectangular bar. The tensile strength of Y-TZP was lower than that of the three-point bend strength, and the shape of the tensile strength distribution was quite different from that of the three-point bend strength distribution. It was difficult to predict the distribution curve of the tensile strength using the data of the three-point bend strength by one-modal Weibull distribution. The distribution of the tensile strength was analyzed by two- or three-model Weibull distribution coupled with an analysis of fracture origins. The distribution curve of the three-point bend strength which was estimated by multimodal Weibull distribution agreed favorably with that of the measured three-point bend strength values. A two-modal Weibull distribution function was formulated approximately from the distributions of the tensile and three-point bend strengths, and the estimated two-modal Weibull distribution function for the four-point bend strength agreed well with the measured four-point bend strength.     

Evaluation of the historical records of lead pollution in the annual growth rings and bark pockets of a 250-year-old Quercus crispula in Nikko,Japan

The annual growth rings and bark pockets of a 250-year-old Japanese oak (Quercus crispula), collected from the Nikko National Park, Japan in 2000 AD, were analysed by ICP mass spectrometry. The annual rings, sampled in 5-year increments, recorded Pb concentrations from 0.01 to 0.1 mg kg(-1) and there was no significant change in concentration with time. In contrast, bark pocket samples dating from 1875 to the present showed a progressive increase in Pb concentration with time, from approximately 0.1 to 10 mg kg(-1). Shoots of epiphytic moss growing on the tree trunk contained 17 mg kg(-1) Pb. The bark pockets recorded historical increases in airborne Pb pollution accompanying the industrialisation of Japan, which was initiated by the opening of Japan's borders from 1854. This increase was not reflected by the annual rings. The 206Pb/207Pb isotope ratio of the bark pockets decreased from approximately 1.18 to 1.16 from 1964 to the present, indicating changes in the sources of Pb pollution. The 206Pb/207Pb isotope ratio of the moss shoots was similar to the current bark (1.16). The data showed bark pockets to be more effective than annual rings for recording historical change in airborne lead pollution.     

Application results of a prototype ultrasonic liquid film sensor to a 7 MPa steam–water two-phase flow experiment

A prototype ultrasonic liquid film sensor was applied to a high-temperature steam–water two-phase flow experiment. The liquid film sensor was vertically installed in a loop which was connected to HUSTLE, a multi-purpose steam source test facility. The hydraulic diameter of the measurement section was 9.4 mm. The output waveforms of the sensor were acquired with a digital oscilloscope. The fluid temperature and system pressure were kept at 288 °C and 7.2 MPa, respectively, during the experiment. The pulse-echo method was used to calculate the liquid film thickness. The cross-correlation calculation was utilized to determine the time difference between the pulse reflected at the sensor surface and the pulse reflected at the liquid film surface. The time-averaged liquid film thicknesses were less than 0.055 mm in the annular flow condition. The increase of the time-averaged thickness was small with the change of the gas momentum flux. The film thicknesses measured with the sensor were compared with the past experimental results; the former were smaller than one-fourth of the thickness estimated as the mean film thickness. The comparison results suggested that the continuous liquid sublayer thickness was measured with the liquid film sensor.     

Investigation of the voltage life of mica-alumina composite insulation at high temperatures

Experiments and investigations were carried out on the voltage life of a bar-coil model with a nickel-plated copper conductor covered with mica-alumina composite insulation at a temperature range of 550–850 °C. Diffusion of copper into the insulation layer was observed on the specimens aged for a long period. Insulation with mica paper gave faster diffusion speed and shorter voltage life than insulation with mica flake. The diffusion speed became higher with an increase in temperature. The ac current gradually increased with aging time and increased rapidly just before breakdown. There was the relationship I = aEⁿ (a, n: constants) between ac current I and applied stress E, and n was approximately equal to 1 in the region where thermal unbalance did not occur. Arrhenius's law held in the relationship between ac current and aging time. Therefore, the breakdown mechanism might be that the effective insulation thickness decreased due to copper diffusion into the insulation layer and the ac current increased gradually until thermal breakdown in the last stage. If copper diffuses into the insulation layer, even with no voltage application, the aging time required to decrease the breakdown voltage to a certain level (the voltage life) obeys Arrhenius's law. If the voltage life is dominated by diffusion into the insulation layer, the activation energy for voltage life in the aging test becomes twice that for diffusion, both with and without voltage application. © 1999 Scripta Technica, Electr Eng Jpn, 129(4): 24–31, 1999     

Tradeoffs in granularity and parallelization for a Monte Carlo shower simulation code

The EGS4 code, developed at Stanford Linear Accelerator Center, simulates electron-photon cascading phenomena. The original code is inherently sequential: processing one particle at a time. This paper reports on a series of experiments in parallelizing different versions of EGS4. Our parallel experiments were run on a 30-processor Sequent Balance B21 and a 6-processor Symmetry S27. We have considered the following approaches for parallel execution of this application code:

1. (1) Original sequential version modified for parallel processing: 1 processor;

2. (2) Version 1 run multiprocessed: 1 to 29 processors;

3. (3) Sequential version modified for large-grain parallel processing: 1 procssor;

4. (4) Version 3 run using the Sequent Microtasking Library: 1 to 29 processors.

For each approach, we discuss the relative advantages and disadvantages in the areas of coding effort, understandability and portability, as well as performance, and outline a new parallelization approach we are currently pursuing based on Large-Grain Data Flow techniques.     

Enzymatic enrichment of arachidonic acid from Mortierella single-cell oil

An attempt was made to enrich arachidonic acid (AA) from Mortierella single-cell oil, which had an AA content of 25%. The first step involved the hydrolysis of the oil with Pseudomonas sp. lipase. A mixture of 2.5 g oil, 2.5 g water, and 4000 units (U) Pseudomonas lipase was incubated at 40°C for 40 h with stirring at 500 rpm. The hydrolysis was 90% complete after 40 h, and the resulting free fatty acids (FFA) were extracted with n-hexane (AA content, 25%; recovery of AA, 91%). The second step involved the selective esterification of the fatty acids with lauryl alcohol and Candida rugosa lipase. A mixture of 3.5 g fatty acids/lauryl alcohol (1:1, mol/mol), 1.5 g water, and 1000 U Candida lipase was incubated at 30°C for 16 h with stirring at 500 rpm. Under these conditions, 55% of the fatty acids were esterified, and the AA content in the FFA fraction was raised to 51% with a 92% yield. The long-chain saturated fatty acids in the FFA fraction were eliminated as urea adducts. This procedure raised the AA content to 63%. To further elevate the AA content, the fatty acids were esterified again in the same manner with Candida lipase. The repeated esterification raised the AA content to 75% with a recovery of 71% of its initial content.     

Dielectric properties of Permalloy granular composite materials

Dielectric and electrical properties of Permalloy granular composite materials have been studied considering the application to left-handed meta-materials. Surface oxidized Permalloy particles have high surface electrical resistance; the eddy current effect in the composite structure is suppressed. The electrical conductivity of compacted Permalloy particles increases with increasing temperature and indicates the semiconductive layer formation on the particle. The low frequency ac electrical conductivity of Permalloy composite materials shows a drastic increase in the particle content between 50 and 60 vol.%. Electrical permittivity spectra of Permalloy composites show a non-metallic characteristic and the enhancement of permittivity is observed with increase of Permalloy particle content.