Full Band Monte Carlo Study for Two-Dimensional Hole Transport in Strained Si p-MOSFETs

Transport properties of the two-dimensional hole gas in inversion layer of strained Si/SiGe p-MOSFETs are investigated using the full-band Monte Carlo simulator based on the nonlocal pseudopotential calculation. The hole mobility is significantly enhanced by the strain in the case of Ge content of ≥20%. Moreover, we also present the high-field transport characteristics of 2D holes. In contrast to the low-field mobility, the hole saturation velocity does not significantly enhanced by the strain.     

Achieving enhanced ductility in a dilute magnesium alloy through severe plastic deformation

Experiments were conducted to evaluate the utility of a new processing procedure developed for Mg-based alloys in which samples are subjected to a two-step processing route of extrusion followed by equal-channel angular pressing (designated as EX-ECAP). The experiments were conducted using a Mg-0.6 wt pct Zr alloy and, for comparison purposes, samples of pure Mg. It is shown that the potential for successfully using ECAP increases in both materials when adopting the EX-ECAP procedure. For the Mg-Zr alloy, the use of EX-ECAP produces a grain size of ∼1.4 μm when the pressing is undertaken at 573 K. By contrast, using EX-ECAP with pure Mg at 573 K produces a grain size of ∼26 μm. Tensile testing of the Mg-Zr alloy at 523 and 573 K after processing by EX-ECAP revealed the occurrence of significantly enhanced ductilities with maximum elongations of ∼300 to 400 pct.     

Software system of the Earth Simulator

The Earth Simulator (ES) is a large scale, distributed memory, parallel computer system consisting of 640 processor nodes (PN) with shared memory vector multi-processors (64GFLOPS/PN, 5120 APs in total, AP: arithmetic processor). All the nodes are connected via a high speed (16GB/s) single-stage crossbar network called the Interconnection Network (IN).

The operating system for the Earth Simulator is based on SUPER-UX, the UNIX operating system for the SX series scientific supercomputers. In order to realize high-performance parallel processing on the highly parallel machine, the operating system is enhanced for scalability.

The Earth Simulator system is managed as a two-level cluster system called the Super Cluster System. In the Super Cluster System, the Earth Simulator system is divided into 40 clusters (16 PNs/cluster). A single controller called Super Cluster Control Station (SCCS) manages all these clusters. This management system provides Single System Image (SSI) operation, management and job control for the large scale multi-node system.

The Job Scheduler (JS) and NQS running on the SCCS control all jobs of the system. They schedule the resources such as processing nodes and files which have not usually been treated as scheduling resources. This allows efficient scheduling of large scale jobs.

The MPI library (MPI/ES) and the HPF compiler (HPF/ES) are available for distributed parallel programming on the Earth Simulator. MPI/ES conforms to the MPI 2.0 standard and is optimized to exploit the hardware features. HPF/ES conforms to the core part of HPF 2.0 and supports some features of the HPF 2.0 approved extensions and HPF/JA 1.0 extensions. HPF/ES suitably handles the 3-level parallelism of the Earth Simulator system, that is, vectorization, shared-memory parallelization, and distributed-memory parallelization. Moreover, HPF/ES extends the language to easily handle irregular problems.     

Quantum Lattice-Gas Automata Simulation of Electronic Wave Propagation in Nanostructures

We report the two- and three-dimensional quantum lattice-gas automata simulation for one-particle electronic wave propagation in nanostructures. The transmission coefficient of the electronic wave through the two-dimensional quantum point contact is investigated taking account of the surface roughness of the confinement wall. It is demonstrated that the electron transmission is significantly affected by the surface roughness pattern even if the same roughness parameter is assumed. We also perform the three-dimensional simulation, and the wave propagation in the structure like an ultrathin-body MOSFET is visualized.     

Combinatorial pulsed laser deposition and thermoelectricity of (La1−xCax)VO3 composition-spread films

La_1−xCa_xVO₃ composition-spread film library was fabricated by combinatorial pulsed laser deposition and their thermoelectric properties were evaluated paralelly by the multi-channel probes of Seebeck coefficient and electric conductivity. Concurrent X-ray analysis verified the formation of solid soluted films in the full composition range (0x1) as judged from the linear variation of the lattice constants. The Seebeck coefficients of La_1−xCa_xVO₃ changed from a large negative value to almost zero with the increase of x, due presumably to the variation of valence in vanadium ions.The power factor in this library was as high as 0.6 μW/cm K², which was obtained at x=0, i.e. pure LaVO₃ grown at 800 °C.     

Magnetic Behavior of Some Rare-Earth Transition-Metal Perovskite Oxide Systems

Magnetic properties were investigated for the rare-earth 3d-transition metal oxides with the perovskite structure. Intriguing magnetic phenomena were reviewed for a few systems:magnetization peak effect in the titanates, magnetization reversal in the chromites and metallic ferromagnetism in the cobahites. The results suggest an important role of the rare-earth ions for the magnetic properties of such complex oxides.     

38. R&D on hydrogen production by high-temperature electrolysis of steam

One of the objectives of the high-temperature engineering test reactor (HTTR) is to demonstrate the effectiveness of high-temperature nuclear heat utilization, which aims to extend the application of nuclear heat to non-electric fields, especially to hydrogen production. As part of the development of the hydrogen production processes, laboratory-scale experiments of a high-temperature electrolysis of steam (HTES) had been carried out with a practical electrolysis tube with 12 solid-oxide cells connected in series. Using this electrolysis tube, hydrogen was produced at the maximum density of 44 N cm³/cm² h at a electrolysis temperature of 950 °C. Thereafter, to improve hydrogen production performance, a self-supporting planar electrolysis cell with a practical size (80 mm × 80 mm of electrolysis area) was fabricated. In the preliminary electrolysis experiment carried out at 850 °C, the planar cell produced hydrogen at the maximum density of 38 N cm³/cm² h, and the energy efficiency was almost as high as that obtained with the electrolysis tube at 950 °C. However, both electrolysis tubes and planar cells did not keep their integrity in one thermal cycle. Durability of the solid-oxide cell against the thermal cycle is one of the key issues of HTES.     

Bending Behavior of Steel Pipe Girders Filled with Ultralight Mortar

Bending behavior of steel pipes filled with ultralight mortar was studied by bending tests using a steel pipe, steel pipes filled with ultralight mortar, and steel pipes filled with light aggregate concrete and normal concrete. The steel pipe model filled with normal concrete had 1.8 times higher bending strength than the steel pipe model. The bending behavior of the steel pipe filled model with ultralight mortar was not improved when the compressive strength of the ultralight mortar was less than 1 MPa. However, ductility was much improved when the compressive strength was over 5 MPa, and the ultimate steel strain was more than double of the steel pipe model. The strains of steel and concrete in all the models were proportional to the distance from the neutral axis until the steel plate yielded. A simple analytical method was proposed to calculate the bending moments of the ultralight mortar filled steel pipes. The calculated values agreed very well with the test results.     

Remote sensing of vegetation and land-cover change in Arctic Tundra Ecosystems

The objective of this paper is to review research conducted over the past decade on the application of multi-temporal remote sensing for monitoring changes of Arctic tundra lands. Emphasis is placed on results from the National Science Foundation Land-Air-Ice Interactions (LAII) program and on optical remote sensing techniques. Case studies demonstrate that ground-level sensors on stationary or moving track platforms and wide-swath imaging sensors on polar orbiting satellites are particularly useful for capturing optical remote sensing data at sufficient frequency to study tundra vegetation dynamics and changes for the cloud prone Arctic. Less frequent imaging with high spatial resolution instruments on aircraft and lower orbiting satellites enable more detailed analyses of land cover change and calibration/validation of coarser resolution observations.The strongest signals of ecosystem change detected thus far appear to correspond to expansion of tundra shrubs and changes in the amount and extent of thaw lakes and ponds. Changes in shrub cover and extent have been documented by modern repeat imaging that matches archived historical aerial photography. NOAA Advanced Very High Resolution Radiometer (AVHRR) time series provide a 20-year record for determining changes in greenness that relates to photosynthetic activity, net primary production, and growing season length. The strong contrast between land materials and surface waters enables changes in lake and pond extent to be readily measured and monitored.     

Robustness of linearly solvable Markov games employing inaccurate dynamics model

As a model-based reinforcement learning technique, linearly solvable Markov decision process (LMDP) gives an efficient way to find an optimal policy by making the Bellman equation linear under some assumptions. Since LMDP is regarded as model-based reinforcement learning, the performance of LMDP is sensitive to the accuracy of the environmental model. To overcome the problem of the sensitivity, linearly solvable Markov game (LMG) has been proposed, which is an extension of LMDP based on the game theory. This paper investigates the robustness of LMDP- and LMG-based controllers against modeling errors in both discrete and continuous state-action problems. When there is a discrepancy between the model used for building the control policy and dynamics of the tested environment, the LMG-based control policy maintained good performance while that of the LMDP-based control policy deteriorated drastically. Experimental results support the usefulness of LMG framework when acquiring an accurate model of the environment is difficult.